SUPERJARE 70 Inch Console Table with Outlets and USB-C Port Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your SUPERJARE 70 Inch Console Table. This console table is designed for use behind a sofa, in an entryway, or as a general accent table, featuring integrated power outlets and USB ports for convenient device charging. Please read these instructions carefully before assembly and use to ensure safe and proper operation.

Image: SUPERJARE 70 Inch Console Table in an entryway setting.

Safety Information

• Always assemble and install the table according to the provided instructions.
• Secure the anti-tip device to the wall to prevent tipping.
• Keep electrical components dry and away from heat sources.
• Do not place heavy objects on the table that could cause it to tip over.
• Keep sharp edges away from children and pets.
• Ensure the power cord is not pinched or damaged during assembly or use.
• Do not exceed the maximum weight recommendation of 250 pounds.

Package Contents

Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Tabletop (Engineered Wood, Rustic Brown)
• Metal Frame Components (Black)
• Charging Station (2 AC outlets, 1 USB, 1 USB-C port)
• Assembly Guide
• Installation Tool (Screwdriver)
• Adjustable Feet
• Anti-tip Device
• All necessary screws and fasteners

Setup and Assembly Instructions

Assembly requires two people and approximately 30-60 minutes. All necessary tools are included. Follow the steps below carefully.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the included assembly guide to identify each part.
2. Assemble the Metal Frame: Connect the metal frame components using the provided screws and installation tool. Ensure all connections are secure but do not overtighten until the frame is fully assembled. The frame features an X-shaped design for stability.
3. Attach the Tabletop: Carefully place the rustic brown engineered wood tabletop onto the assembled metal frame. Align the pre-drilled holes on the tabletop with the holes on the frame. Secure the tabletop using the appropriate screws.
4. Install the Charging Station: The charging station can be installed in one of two positions: on the side or in the middle of the tabletop. Choose your preferred location. Insert the charging station into the designated cutout on the tabletop and secure it with the provided screws. Ensure the power cord is routed safely.
5. Attach Adjustable Feet: Screw the adjustable feet into the bottom of the table legs. These feet help stabilize the table on uneven floors and protect your flooring from scratches. Adjust them as needed after the table is in its final position.
6. Install Anti-Tip Device: For safety, especially in homes with children or pets, attach the anti-tip device to the back of the table and secure it to a wall stud using the provided hardware. This prevents accidental tipping.
7. Final Tightening: Once all components are assembled and positioned, go back and securely tighten all screws. Do not overtighten.

Image: Console table dimensions (70.9"W x 11.8"D x 31.5"H).

Image: Detail of sturdy particleboard tabletop (0.6") and metal frame (0.78").

Image: Adjustable feet for leveling and floor protection.

Operating Instructions

The SUPERJARE Console Table features an integrated charging station for your convenience.

1. Power Connection: After assembly, plug the table's power cord into a standard 120V AC wall outlet.
2. Using AC Outlets: The charging station includes two 125V/12A AC outlets. Plug in devices such as lamps, speakers, or laptops directly into these outlets.
3. Using USB Ports: The charging station provides one standard USB port (5V-2A) and one USB-C port (5V-2A). Connect your smartphones, tablets, or other USB-powered devices using their respective charging cables.
4. Placement Options: The charging station can be positioned either on the side or in the middle of the tabletop during assembly, allowing for flexible access based on your setup.

Image: Integrated charging station with 2 AC outlets, 1 USB, and 1 USB-C port.

Image: Two assembly choices for the charging station (side or middle).

Maintenance

• Cleaning the Wood Surface: Wipe the engineered wood tabletop with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Cleaning the Metal Frame: Clean the metal surfaces with a damp cloth. Dry immediately to prevent rust.
• Electrical Components: Ensure the charging station and power cord remain dry. Do not immerse in water or spray with liquids.
• Regular Checks: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.

Troubleshooting

Specifications

• Brand: SUPERJARE
• Model Name: EU7022FC
• Product Dimensions (D x W x H): 11.8" x 70.9" x 31.5"
• Maximum Weight Recommendation: 250 Pounds
• Frame Material: Metal (Alloy Steel)
• Top Material: Engineered Wood
• Color: Rustic Brown (Top), Black (Frame)
• Charging Station: 2 AC Outlets (125V/12A), 1 USB Port (5V-2A), 1 USB-C Port (5V-2A)
• Special Features: USB Ports, Storage, Adjustable Feet, Charging Station
• Assembly Required: Yes (Recommended 2 people)
• Included Components: Assembly Guide, Charging Station, Installation Tool
• Product Care Instructions: Wipe engineered wood with a dry cloth, clean metal surfaces with a damp cloth.

Warranty and Support

This SUPERJARE product comes with a full warranty. For specific warranty details, claims, or technical support, please refer to the contact information provided with your purchase or visit the official SUPERJARE website. Please retain your proof of purchase for warranty purposes.

For assistance with assembly, missing parts, or any operational questions, please contact SUPERJARE customer service.