1. Product Overview
The Amazon Basics Full Motion TV Wall Mount (Model AM60A) is designed to securely mount flat-panel televisions ranging from 32 to 86 inches in size and weighing up to 132 lbs (60 kg). This articulating mount offers horizontal post installation leveling, allowing for precise positioning and optimal viewing angles. It is compatible with various VESA patterns from 100x100 mm to 600x400 mm and can be installed on concrete, brick, and 16-inch wood stud walls.
Key features include a tilt range of +10° to -5°, an articulating arm that extends from 2.6 inches to 19.9 inches, and 180° swivel capability, providing versatile viewing options for any room layout.
2. Safety Information
WARNING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.
- Ensure the wall structure can safely support the combined weight of the mount and the television.
- Do not exceed the maximum weight capacity of 132 lbs (60 kg).
- This mount is designed for concrete, brick, and 16-inch wood stud walls. Do not install on drywall only.
- Use a stud finder to accurately locate wood studs.
- Always use appropriate personal protective equipment during installation.
- Two people are recommended for installation to ensure safety and ease of handling.
- Verify all connections are secure before mounting the TV.
- Keep children and pets away during installation.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, do not attempt to install. Contact customer support for assistance.
Figure 3.1: All mounting hardware, including bolts, washers, spacers, and zip ties, are provided for various TV models and wall types.
The package includes the main mount assembly, TV brackets, a mounting template, and a comprehensive hardware kit with various screws, washers, and anchors to accommodate different TV models and wall types.
4. Specifications
| Specification | Value |
|---|---|
| Product Dimensions | 21.87 x 21.77 x 19.9 inches |
| Item Weight | 17.8 pounds |
| Model Number | AM60A |
| Mounting Type | Wall Mount |
| Movement Type | Articulating |
| Material | Alloy Steel |
| Maximum Compatible Size | 86 Inches |
| Minimum Compatible Size | 32 Inches |
| Maximum Tilt Angle | 15 Degrees (+10° to -5°) |
| Weight Capacity | 132 lbs (60 kg) |
| VESA Compatibility | 100x100 mm to 600x400 mm |
| Extension Range | 2.6" to 19.9" |
| Swivel Range | 180° |
5. Setup and Installation
Follow these steps carefully for a secure and successful installation. It is highly recommended to have a second person assist with the installation process.
5.1. Pre-Installation Check
- TV Compatibility: Verify your TV's size (32-86 inches), weight (up to 132 lbs/60 kg), and VESA mounting pattern (100x100 mm to 600x400 mm).
- Wall Type: This mount is suitable for solid concrete walls, brick walls, and wood stud walls (16-inch stud spacing). Do not use with 18 or 24-inch studs. Do not install on drywall only.
Figure 5.1: Compatible VESA patterns, TV sizes, and wall types for installation.
Figure 5.2: Detailed view of available VESA patterns supported by the mount.
5.2. Attaching TV Brackets
- Carefully place your TV face down on a soft, clean surface to prevent scratches.
- Identify the VESA mounting holes on the back of your TV.
- Select the appropriate screws and spacers from the hardware kit that fit your TV's mounting holes.
- Attach the vertical TV brackets to the back of your TV using the selected screws and spacers. Ensure they are securely tightened.
Figure 5.3: The main mount assembly with articulating arms.
Figure 5.4: Heavy-duty steel construction of the mount ensures durability and stability.
5.3. Wall Plate Installation
- Determine the desired height for your TV. Use the provided mounting template to mark the drill holes on the wall.
- For wood stud installation, use a stud finder to locate the center of two adjacent 16-inch spaced studs. Mark the drill points.
- For concrete or brick walls, mark the drill points directly.
- Drill pilot holes at the marked locations using the recommended drill bit size for your wall type.
- Secure the wall plate to the wall using the appropriate lag bolts and washers. Ensure the wall plate is level using a spirit level.
Figure 5.5: Use the provided mounting template for accurate hole placement.
Figure 5.6: The mount installed on a wall, ready for TV attachment.
5.4. Mounting the TV
- With assistance, carefully lift the TV and hook the TV brackets onto the wall plate.
- Ensure the TV is securely seated on the wall plate.
- Engage any safety locks or screws to prevent accidental dislodgement.
6. Operating Instructions
The Full Motion TV Wall Mount allows for flexible adjustment to achieve the best viewing experience.
- Extension: Gently pull the TV away from the wall to extend the articulating arm up to 19.9 inches (50.5 cm).
- Retraction: Push the TV back towards the wall until it is at the desired distance, with a minimum of 2.6 inches from the wall.
- Swivel: Rotate the TV horizontally up to 180° (90° left or 90° right) to adjust the viewing angle.
- Tilt: Adjust the vertical tilt from +10° (upwards) to -5° (downwards) to reduce glare or optimize viewing from different heights.
- Horizontal Leveling: The mount features horizontal post-installation leveling, allowing for minor rotational adjustments to ensure the TV is perfectly level after installation.
Figure 6.1: Versatility for optimal viewing, including extension, tilt, and swivel capabilities.
Figure 6.2: The mount's design allows for flexible positioning and centering.
7. Maintenance
Regular maintenance helps ensure the longevity and safe operation of your TV wall mount.
- Cleaning: Wipe the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
- Periodic Inspection: Periodically check all screws and bolts to ensure they remain tight and secure. Over time, vibrations or adjustments may cause them to loosen.
- Movement Check: Test the tilt, swivel, and extension mechanisms to ensure they operate smoothly. If any stiffness is noted, a small amount of silicone-based lubricant can be applied to moving parts (avoiding electrical components).
- Weight Limit: Do not hang additional items or exceed the specified weight limit on the mount.
8. Troubleshooting
If you encounter any issues with your TV wall mount, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level after installation. | Minor rotational misalignment. | Utilize the horizontal post-installation leveling feature to make fine adjustments. |
| Mount feels unstable or wobbly. | Loose mounting bolts or incorrect wall type. | Ensure all lag bolts securing the wall plate are tightly fastened into studs or appropriate anchors. Verify wall type compatibility. |
| Difficulty adjusting tilt/swivel/extension. | Joints are stiff or TV weight is unevenly distributed. | Apply a small amount of silicone-based lubricant to the articulating joints. Ensure the TV is centered on the mount. |
| TV does not fit the mount. | Incorrect VESA pattern or TV size/weight. | Double-check your TV's VESA pattern and compare it to the mount's specifications. Ensure your TV is within the supported size and weight range. |
9. Warranty and Support
For warranty information and customer support, please refer to the official Amazon Basics website or the warranty document included with your product.
You can access the Warranty document here.
For further assistance, please contact Amazon Basics customer service.
