Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your SoBuy FWT84-PF High Bar Table. Please read these instructions carefully before assembly and use to ensure safe and correct installation and to maximize the product's lifespan.
Image: The SoBuy FWT84-PF High Bar Table, featuring a wooden top, black metal frame, and integrated shelving, positioned in a modern kitchen environment with a bar stool.
Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum weight recommendation for the tabletop or shelves.
- Keep small parts away from children during assembly to avoid choking hazards.
- Avoid placing hot items directly on the surface without protection.
- Do not stand or climb on the table.
Parts List
Before beginning assembly, verify that all components listed below are present. If any parts are missing or damaged, please contact customer support.
Image: An exploded diagram illustrating the main components of the bar table, including the tabletop, metal frame sections, and shelf boards, along with overall dimensions.
(Note: Specific part labels and quantities are typically provided in the manufacturer's packaging. This list is generalized.)
- Tabletop (1x)
- Metal Frame Sections (various, e.g., legs, crossbars, shelf supports)
- Shelf Boards (3x)
- Assembly Hardware (screws, bolts, Allen wrench, etc.)
- Adjustable Feet (4x)
Setup and Assembly Instructions
Follow these steps carefully to assemble your SoBuy FWT84-PF High Bar Table. It is recommended to have two people for assembly.
- Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface. Refer to the parts list and diagram to identify each piece.
- Assemble the Main Frame: Begin by connecting the main vertical metal frame sections using the provided crossbars and screws. Ensure all connections are finger-tightened initially.
- Attach Shelf Supports: Secure the vertical metal bars that form the shelf enclosure to the main frame.
- Install Shelf Boards: Slide or place the three shelf boards into their designated positions within the shelf enclosure. Secure them with the appropriate fasteners.
- Attach Tabletop: Carefully place the tabletop onto the assembled metal frame. Align the pre-drilled holes and secure the tabletop using the provided screws.
- Tighten All Fasteners: Once all components are in place, systematically tighten all screws and bolts using the provided Allen wrench or screwdriver. Do not overtighten.
- Install Adjustable Feet: Screw the adjustable feet into the bottom of the table legs. Adjust them to ensure the table is stable and level on your floor.
- Final Check: Gently shake the table to ensure it is stable. If any wobbling occurs, re-check all connections and adjust the feet.
Image: A detailed view of the three integrated shelves, showing their construction and how items can be stored.
Image: A close-up of the tabletop surface, highlighting its texture and finish, with a book and cup placed on it.
Image: A close-up showing the connection point of the metal frame, including a bracket for structural support.
Operating Instructions
The SoBuy FWT84-PF High Bar Table is designed for use in bar, kitchen, or dining room settings. To ensure optimal performance and longevity:
- Weight Capacity: The tabletop has a maximum weight recommendation of 70 kg (154 lbs). Distribute weight evenly. The shelves are designed for lighter items.
- Surface Protection: Use coasters or placemats under hot dishes, wet glasses, or abrasive objects to protect the tabletop surface.
- Placement: Position the table on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent material degradation.
Image: The bar table serving as a casual dining or work surface in a living room, demonstrating its versatility.
Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
- Spills: Clean up spills immediately to prevent staining or water damage.
- Fasteners: Periodically check all screws and bolts and re-tighten them as needed to maintain stability.
- Environmental Conditions: Maintain a stable indoor environment. Extreme changes in temperature or humidity can affect the wood and metal components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly. | Loose fasteners or uneven floor. | Check and tighten all screws and bolts. Adjust the leveling feet on the bottom of the legs. |
| Parts do not align during assembly. | Incorrect orientation of parts or overtightened screws. | Loosen all screws, re-orient parts as per instructions, then gradually tighten. Ensure not to overtighten until all parts are aligned. |
| Scratches on surface. | Abrasive objects or improper cleaning. | Use coasters/placemats. Clean with soft cloth. Minor scratches may be concealed with furniture polish or markers designed for wood. |
Specifications
- Model: FWT84-PF
- Brand: SoBuy
- Product Dimensions (D x W x H): 50 cm x 115 cm x 107 cm (19.69"D x 45.28"W x 42.13"H)
- Item Weight: 16.9 Kilograms (37.26 lbs)
- Maximum Weight Recommendation (Tabletop): 70 Kilograms (154 lbs)
- Frame Material: Metal
- Top Material Type: Engineered Wood
- Number of Shelves: 3
- Color: Black frame with wood-look tabletop
- Style: Industrial
- Recommended Uses: Dining, Kitchen, Bar
Warranty and Support
For warranty information or customer support regarding your SoBuy FWT84-PF High Bar Table, please refer to the documentation included with your purchase or visit the official SoBuy website. If you have any questions or require assistance with assembly or parts, please contact SoBuy customer service directly.
Contact information is typically provided on the product packaging or manufacturer's website.
