JEKCA ST19HSK01-M03

JEKCA Husky 4-in-1 Pack 01S-M03 Building Blocks Instruction Manual

Model: ST19HSK01-M03

Introduction

This manual provides detailed instructions for assembling your JEKCA Husky 4-in-1 Pack 01S-M03 plastic building block set. Please read all instructions carefully before beginning assembly to ensure a correct and enjoyable building experience. This set allows for the construction of one Husky model in one of four distinct poses. Only one pose can be built at a time from the included parts.

Safety Information

  • Small Parts: This product contains small parts and is not suitable for children under 14 years of age due to choking hazards.
  • Recommended Age: This product is recommended for individuals aged 14 years and up.
  • Adult Supervision: Adult supervision is recommended during assembly, especially for younger builders within the recommended age range.

Package Contents

Before starting assembly, please verify that all components are present in your package:

  • Instruction Manual
  • Building Bricks (various shapes and colors)
  • Pins (for interlocking bricks)
  • Pin Driver (assembly tool)
  • Quick Guide

Assembly Instructions

The JEKCA building system utilizes a unique interlocking brick-through technology, securing bricks with pins for a sturdy model. Follow the detailed steps in the included instruction manual for your chosen pose.

JEKCA Husky 4-in-1 Pack: Four possible poses for the Husky model.
JEKCA Husky 4-in-1 Pack: Four possible poses for the Husky model. Note that only one pose can be built at a time from the included parts.

Understanding the Interlocking System

JEKCA bricks are designed to be assembled using small pins that pass through the bricks, creating a strong, stable connection. The pin driver tool is essential for this process.

Assembly Steps: Illustration of the JEKCA interlocking brick-through technology using pins and a pin driver to secure bricks.
Assembly Steps: Illustration of the JEKCA interlocking brick-through technology using pins and a pin driver to secure bricks.
  1. Step 1: Align Bricks. Place two bricks together, ensuring their holes align.
  2. Step 2: Insert Pins. Insert the provided pins into the aligned holes.
  3. Step 3: Secure with Pin Driver. Use the pin driver to push the pins completely through the bricks, locking them together. Apply firm, even pressure.
Secure Interlocking: Close-up view demonstrating the stability of JEKCA bricks when assembled with pins.
Secure Interlocking: Close-up view demonstrating the stability of JEKCA bricks when assembled with pins.

Choosing Your Pose

Refer to the main instruction manual for specific steps for each of the four available poses. Choose one pose to build before starting.

Standing Husky Model Dimensions
Standing Husky Model Dimensions: Length 45.6cm, Depth 11.9cm, Height 37.0cm.
Sitting Husky Model Dimensions
Sitting Husky Model Dimensions: Length 40.0cm, Depth 16.9cm, Height 34.6cm.
Running Husky Model Dimensions
Running Husky Model Dimensions: Length 47.5cm, Depth 11.9cm, Height 21.2cm.
Howling Husky Model Dimensions
Howling Husky Model Dimensions: Length 32.5cm, Depth 14.4cm, Height 37.5cm.

Care and Maintenance

  • Cleaning: To clean your assembled model, gently wipe it with a dry, soft cloth. For stubborn dust, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the model in a stable location away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
  • Disassembly: If you wish to disassemble the model to build a different pose, carefully use the pin driver to remove the pins. Avoid excessive force to prevent damage to the bricks or pins.

Troubleshooting

Problem: Pins do not fit or are difficult to insert.
Solution: Ensure the bricks are perfectly aligned before attempting to insert pins. Use the pin driver to apply steady, even pressure. If a pin still does not fit, check for any debris in the brick holes. Do not force pins, as this may damage the bricks or pins. If issues persist, contact JEKCA support.
Problem: Assembled model feels unstable or parts detach easily.
Solution: Verify that all pins are fully inserted and flush with the brick surface. Review the instruction manual for the specific section where instability occurs to ensure all steps were followed correctly. The JEKCA interlocking system is designed for sturdiness when correctly assembled.

Product Specifications

Product Name:
JEKCA Husky 4-in-1 Pack
Model Number:
ST19HSK01-M03
Product Dimensions (assembled, standing pose):
Length: 45.6 cm (17.95 inches), Depth: 11.9 cm (4.69 inches), Height: 37.0 cm (14.57 inches)
Item Weight:
5.21 pounds (2.36 kg)
Number of Pieces:
>3250 pieces
Manufacturer Recommended Age:
14 years and up
Material:
Plastic

Warranty Information

For specific warranty details regarding your JEKCA product, please refer to the documentation included in your original packaging or visit the official JEKCA website. JEKCA products are designed for durability and quality.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing parts, please contact JEKCA customer support. You can find contact information on the official JEKCA website or through the retailer where the product was purchased.

Visit the JEKCA Store: JEKCA Official Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.