Yansoo A88A Dash Cam

Download PDF
Contents

Yansoo Dual Dashcam A88A Instruction Manual

Model: A88A Dash Cam | Brand: Yansoo

1. Introduction

Thank you for choosing the Yansoo Dual Dashcam A88A. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new dashcam. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. Package Contents

Please check the package for the following items:

  • Front Camera
  • Rear Camera
  • Car Charger
  • Suction Mount
  • Power Cable
  • User Manual
  • Cleaning Cloth
Yansoo Dual Dashcam A88A package contents including front camera, rear camera, car charger, suction mount, power cable, user manual, and cleaning cloth.

Image: Yansoo Dual Dashcam A88A package contents.

3. Product Overview

The Yansoo Dual Dashcam A88A features a 3-inch IPS screen, a 1080P front camera with a 170° wide-angle lens, and a 150° waterproof rear camera. It is designed to capture clear video footage of both the front and rear of your vehicle.

Yansoo Dual Dashcam A88A front and rear cameras with 3-inch IPS display.

Image: Yansoo Dual Dashcam A88A front and rear cameras with display.

Key Features:

  • 3-inch IPS Screen: Provides a clear view of recordings and settings.
  • 1080P Full HD Recording: Captures high-resolution video at 30fps.
  • Dual Camera System: 170° front camera and 150° rear camera for comprehensive coverage.
  • Super Night Vision: F1.8 large aperture, 4 IR LEDs, WDR, and HDR technology for enhanced low-light recording.
  • G-Sensor: Automatically detects collisions and locks video footage.
  • Loop Recording: Continuously records, overwriting older files when the memory card is full (locked videos are protected).
  • Parking Monitor: Activates recording upon impact when parked (requires hardwire kit for 24/7 monitoring).
  • Motion Detection: Records when motion is detected in front of the camera.

4. Setup and Installation

Before installation, ensure you have a Class 10 or above 32GB Micro SD card (not included). Format the card in the camera menu before first use.

4.1. Front Camera Installation

  1. Attach the suction mount to the dashcam.
  2. Clean the desired area on your windshield.
  3. Press the suction cup firmly against the windshield and twist the knob to secure it.
  4. Connect the power cable from the dashcam to your car's cigarette lighter interface.
  5. Route the power cable neatly along the windshield edge and A-pillar to avoid obstructing your view.
Yansoo Dual Dashcam A88A mounted on a car windshield with power cable routed.

Image: Front dashcam mounted on windshield with cable routing.

4.2. Rear Camera Installation

There are two primary methods for installing the rear camera:

Method 1: Mount on the Rear Windshield

This method involves mounting the rear camera on the inside of your vehicle's rear windshield. The cable can be routed along the headliner and side panels.

Method 2: Install near the License Plate

For external mounting, the rear camera can be installed near your license plate. This typically involves drilling small holes for mounting and cable routing. The red wire from the rear camera cable should be connected to the positive pole of your car's reverse light if you desire the reverse guide line feature. If your car has a reverse system or you do not need the guide line, this red wire connection is optional.

Video: Detailed guide on how to install the rear camera, including routing the cable and connecting the reverse light wire.

Rear camera view on the dashcam screen, showing parking monitor and 150-degree wide rear angle features.

Image: Rear camera view and features.

5. Operating Instructions

Once powered on, the dashcam will automatically start recording. Press the 'OK' button to stop recording.

5.1. Mode Switching

Long-press the 'M' button to switch between Video Recording, Photo, and Playback modes.

5.2. Loop Recording

The dashcam supports continuous loop recording in 1, 3, or 5-minute segments. When the memory card is full, the oldest unlocked videos will be automatically overwritten. Videos locked by the G-Sensor are protected from being overwritten.

Diagram illustrating loop recording, G-sensor, parking monitoring, and motion detection features of the dashcam.

Image: Loop Recording and other key features.

5.3. G-Sensor (Emergency Recording)

The built-in G-Sensor detects sudden impacts or collisions. When an impact reaches the set G-Sensor level, the dashcam will automatically record a 31-second video, lock it, and save it to prevent overwriting.

5.4. Parking Monitor

When enabled, the parking monitor feature will automatically turn on the dashcam and record a 31-second video if an impact is detected while your car is parked. For 24/7 parking monitoring, a separate hardwire kit is required.

5.5. Motion Detection

When motion detection is enabled, the dashcam will start recording automatically if it detects movement in front of the camera. It is recommended to set Motion Detection to OFF during normal driving to avoid unnecessary recordings.

5.6. Night Vision

The dashcam utilizes an F1.8 large aperture, 4 IR LEDs, and WDR (Wide Dynamic Range) + HDR (High Dynamic Range) technology to enhance low-light sensitivity, ensuring clear and vivid recordings during nighttime driving.

Illustration of enhanced night vision technology with F1.8 aperture, WDR, HDR, and IR LEDs for clear nighttime recording.

Image: Enhanced Night Vision features.

5.7. Playback

You can view recorded videos directly on the dashcam's 3-inch IPS screen or by connecting the memory card to a computer.

6. Settings Menu

Press the 'M' button (short press) to enter the setup function. Navigate through the menu using the up/down buttons and confirm selections with the 'OK' button.

  • Gravity Sensor Level: Low
  • Loop Recording: 3 minutes
  • Motion Detection: OFF (for normal driving)
  • Parking Monitor: ON
  • Auto Power Off: OFF

7. Maintenance

To ensure reliable performance, regularly format your Micro SD card (at least once a month). Use the provided cleaning cloth to keep the camera lenses and screen clear.

8. Troubleshooting

  • Device Freezes or Malfunctions: Use a needle to insert into the small reset hole labeled 'R' on the device to restart it.
  • Rear Camera Not Displaying: Check all cable connections for the rear camera. Ensure the cable is not damaged.
  • Recording Stops Unexpectedly: Ensure the Micro SD card is Class 10 or higher and has been formatted. The card may be full if loop recording is off or too many locked files exist.
  • Poor Night Vision: Ensure the camera lens is clean. Check that WDR/HDR settings are enabled.

9. Specifications

Product Dimensions3.74 x 0.59 x 1.97 inches
Item Weight2.54 ounces
Item Model NumberA88A Dash Cam
Connectivity TechnologyUSB
Special FeaturesBuilt-In Microphone, 1080P FHD, G-Sensor, Parking Monitor, Loop Recording, 170° Wide Angle, WDR, DVR Dashboard Camera, Motion Detection, 3 Inches IPS Screen
Video Capture Resolution1080p
Mounting TypeWindshield Mount
Field Of View170 Degrees
ColorBlack

10. Warranty and Support

Yansoo offers lifetime after-sales support and a 1-year warranty for the Dual Dashcam A88A. For technical assistance or any questions regarding your dashcam, please contact our customer service team via Amazon or the after-sales email provided in the manual.

Customer service icon representing Yansoo's 7x24 hour technical support.

Image: Yansoo customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.