Important Safety Information
Read all instructions carefully before beginning installation. Failure to follow these instructions may result in electric shock, fire, or personal injury. Keep this manual for future reference.
- Ensure power is disconnected at the circuit breaker before installation or maintenance.
- All electrical connections must be in accordance with local codes, ordinances, or national electrical codes. If you are unfamiliar with electrical wiring, consult a qualified electrician.
- Mounting structure must be capable of supporting the fan's weight (refer to specifications).
- Do not operate the fan with damaged blades or housing.
- Keep hands, clothing, and other objects clear of fan blades during operation.
Package Contents
Verify that all components are present before beginning installation.
- Ceiling Fan Motor Assembly
- Fan Blades (5)
- Blade Brackets
- Light Kit Assembly with Integrated LED
- Remote Control with Wall Mount
- Mounting Hardware (screws, washers, wire nuts)
- Instruction Manual
Image: All components of the Patriot Lighting Ogun 52-inch Gunmetal Indoor LED Ceiling Fan, including the motor housing, five fan blades, light kit, and remote control.
Setup and Installation
Professional installation is recommended. Ensure all power is off at the circuit breaker before proceeding.
Tools Required:
- Phillips Screwdriver
- Flathead Screwdriver
- Adjustable Wrench
- Wire Strippers
- Electrical Tape
- Step Ladder
Installation Steps:
- Mounting Bracket Installation: Secure the mounting bracket to the ceiling junction box. Ensure the junction box is securely fastened to the building structure and can support the fan's weight.
- Wiring Connections: Connect the fan's electrical wires to the household wiring according to the wiring diagram provided in the separate wiring guide (not included in this manual). Ensure all connections are secure with wire nuts and electrical tape.
- Fan Assembly: Carefully lift the fan motor assembly and hang it onto the mounting bracket. Secure the fan to the bracket using the provided screws.
- Blade Attachment: Attach each fan blade to its respective blade bracket using the provided screws. Then, attach the blade brackets to the motor housing.
Image: Close-up of a single fan blade, showing the mounting holes for attachment to the blade bracket.
- Light Kit Installation: Connect the light kit wiring to the fan motor wiring. Secure the light kit assembly to the bottom of the fan motor housing.
- Canopy Installation: Slide the canopy up to the ceiling and secure it to the mounting bracket, covering all wiring connections.
Operating Instructions
This ceiling fan is operated using the included remote control.
Remote Control Functions:
- Fan ON/OFF: Press to turn the fan on or off.
- Fan Speed Control: Buttons for adjusting fan speed (Low, Medium, High).
- Light ON/OFF: Press to turn the integrated LED light on or off.
- Light Dimming: Hold the light button to dim or brighten the light. The LED light is dimmable.
- Color Temperature (CCT) Adjustment: Press the CCT button to cycle through available color temperatures (2,700K to 6,500K).
- Fan Direction (Reverse): A button to change the fan's rotation direction for summer (downward airflow) or winter (upward airflow).
Note: The remote control requires batteries (not included). Ensure batteries are installed correctly.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your ceiling fan.
- Cleaning: To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- Blade Cleaning: Dust fan blades regularly to prevent dust buildup, which can affect fan balance and performance.
- Tightening Screws: Periodically check all screws on the fan housing and blades to ensure they are tight. Loose screws can cause noise or wobble.
- Light Source: The LED light is integrated and not user-replaceable. If the LED light fails, contact customer support.
Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start. | No power to the fan; loose wire connections; remote control battery dead. | Check circuit breaker. Ensure all wiring connections are secure. Replace remote control batteries. |
| Remote control not working or unresponsive. | Remote battery low or dead; remote not paired with fan; obstruction between remote and fan. | Replace remote batteries. Ensure you are within effective range (typically within 10-15 feet) and there are no obstructions. Refer to the remote pairing instructions (usually found in the full installation guide). |
| Fan wobbles. | Loose blade screws; unbalanced blades; loose mounting bracket. | Tighten all blade screws. Ensure blades are installed correctly. Check mounting bracket for secure attachment. Use a blade balancing kit if necessary. |
| Light does not work. | Loose wire connection to light kit; LED failure. | Check light kit wiring connections. If LED is integrated and fails, contact customer support for assistance. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Patriot Lighting |
| Model Number | 20747 |
| Product Dimensions | 11"D x 22.5"W x 12.25"H |
| Fan Size | 52 inches |
| Color | Gunmetal |
| Indoor/Outdoor Usage | Indoor |
| Light Source | Integrated LED (16.2W, 100W-equivalent) |
| Color Temperature (CCT) | Adjustable (2,700K to 6,500K) |
| Color Rendering Index (CRI) | 90 |
| Lumen Output | 1,005 lumens |
| Control Method | Remote Control |
| Dimmable | Yes |
| Blade Material | Plastic |
| Power Source | Corded Electric |
Warranty and Customer Support
This Patriot Lighting product is covered by a limited manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical assistance, replacement parts, or warranty claims, please contact Patriot Lighting customer support. Contact information can typically be found on the product packaging or the official Patriot Lighting website.
When contacting support, please have your model number (20747) and purchase date available.