Patriot Lighting Hightowne II 24" LED Fandelier

1. Important Safety Instructions

Read all instructions carefully before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other personal injury or property damage.

• WARNING: To reduce the risk of electric shock, ensure electricity is turned off at the circuit breaker or fuse box before installation or servicing.
• All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, consult a qualified electrician.
• Do not install this fandelier in a location where it can be reached by water or moisture.
• Ensure the mounting structure can support the weight of the fandelier.
• Do not attempt to repair or modify the fandelier. Contact customer support for assistance.
• Keep children and pets away from the installation area.

2. Package Contents

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the product. Contact customer service for replacement parts.

• Fandelier Unit (Integrated LED Light and Fan)
• Mounting Bracket
• Downrod (if applicable for your model)
• Canopy
• Remote Control
• Hardware Pack (screws, wire nuts, washers)
• Instruction Manual

3. Product Overview

The Patriot Lighting Hightowne II 24" LED Fandelier combines a ceiling fan and an LED light fixture into a single, compact unit. It features a chrome finish and a contemporary design, suitable for various indoor spaces.

Image 1: Front view of the Patriot Lighting Hightowne II 24" LED Fandelier.

Image 2: The fandelier installed in a contemporary living room setting.

4. Installation Guide

Professional installation by a qualified electrician is highly recommended to ensure proper and safe operation. Always turn off power at the circuit breaker before starting any electrical work.

4.1 Pre-Installation

1. Turn off Power: Locate the circuit breaker that supplies power to the installation location and turn it off. Verify power is off using a voltage tester.
2. Prepare Mounting Location: Ensure the junction box is securely mounted to a structural element of the building and can support the fandelier's weight.
3. Unpack Components: Carefully remove all parts from the packaging and place them on a clean, soft surface to prevent scratches.

4.2 Mounting the Fandelier

1. Attach Mounting Bracket: Secure the mounting bracket to the ceiling junction box using the provided screws and washers.
2. Assemble Downrod (if applicable): If using a downrod, feed the electrical wires from the fandelier through the downrod and secure the downrod to the fandelier body.
3. Hang Fandelier: Carefully lift the fandelier and hang it onto the mounting bracket.

4.3 Wiring Connections

Connect the electrical wires according to the following general guidelines. Refer to the specific wiring diagram included in your package for detailed instructions.

• Connect the black (hot) wire from the fandelier to the black (hot) wire from the ceiling.
• Connect the white (neutral) wire from the fandelier to the white (neutral) wire from the ceiling.
• Connect the green or bare copper (ground) wire from the fandelier to the green or bare copper (ground) wire from the ceiling.
• Secure all connections with wire nuts and ensure no bare wire is exposed.

4.4 Final Assembly

1. Secure Canopy: Push the canopy up against the ceiling and secure it to the mounting bracket with the provided screws.
2. Restore Power: Once all connections are secure and the fandelier is fully assembled, restore power at the circuit breaker.

Image 3: The fandelier shown with an optional downrod for varied ceiling heights.

Image 4: Dimensional drawing of the Hightowne II 24" LED Fandelier, showing a 23.6" width and 12" height.

5. Operating Instructions

The Hightowne II Fandelier is operated using the included remote control.

5.1 Remote Control Functions

• Light ON/OFF: Press the light button to turn the LED light on or off.
• Fan Speed Control: Use the fan speed buttons to cycle through different fan speeds (e.g., Low, Medium, High) or to turn the fan off.
• Timer Function: Some remotes may include a timer function to automatically turn off the fan or light after a set period. Refer to your remote's specific markings.

Ensure the remote control has fresh batteries installed and is pointed towards the fandelier for optimal operation.

6. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your fandelier.

• Cleaning: Dust the fandelier regularly with a soft, dry cloth. For more thorough cleaning, use a slightly damp cloth with a mild, non-abrasive cleaner. Do not spray cleaner directly onto the fandelier.
• LED Light Source: The LED light source is integrated and not user-replaceable. If the LED light fails, contact customer support.
• Fan Blades: The fan blades are enclosed. Ensure the fan grille remains free of dust and debris to maintain airflow.
• Tighten Fasteners: Periodically check all fasteners and connections to ensure they are secure.

7. Troubleshooting

If you experience issues with your fandelier, refer to the following common problems and solutions:

If the problem persists after trying these solutions, contact Patriot Lighting customer support.

8. Specifications

9. Warranty and Customer Support

For warranty information, technical assistance, or to order replacement parts, please contact Patriot Lighting customer support directly. Keep your purchase receipt as proof of purchase.

Patriot Lighting Customer Service: Refer to the contact information provided with your product packaging or visit the official Patriot Lighting website.