Novastar NOVASTAR-VX1000
NovaStar VX1000 LED Display Controller
User Manual
Model: NOVASTAR-VX1000
1. Product Overview
The NovaStar VX1000 is an advanced all-in-one controller designed for LED display applications. It integrates video processing and video control functionalities, offering a comprehensive solution for managing high-resolution LED screens. This device supports various input signals and provides powerful output capabilities, making it suitable for a wide range of professional display environments.
Key Features:
- Integrated Control: Combines video processing and control into a single unit.
- High Pixel Capacity: Drives up to 6.5 million pixels, with maximum output width of 10,240 pixels and height of 8,192 pixels.
- Versatile Inputs: Includes HDMI 1.4 (IN & LOOP), DVI (IN & LOOP), and 3G-SDI (IN & LOOP) ports.
- Extensive Outputs: Features 10 Gigabit Ethernet output ports and a 10G optical fiber port (OPT1).
- Advanced Processing: Supports 4K×1K@60Hz image processing, stepless output scaling, low latency, and 3D display.
- Calibration: Offers pixel-level brightness and chroma calibration for superior image quality.
2. Device Layout
The NovaStar VX1000 features a well-organized front and rear panel for easy operation and connectivity. Below is an illustration of the device with descriptions of its key components.
Figure 2.1: Front and Rear Panels of the NovaStar VX1000.
2.1 Front Panel
The front panel provides access to the main control interface, input selection, and function buttons, along with a display screen for status monitoring.
- Display Screen: Shows current status, input resolutions, and system information.
- Menu Knob & ESC Button: Used for navigating and confirming selections within the menu system.
- Control Section: Buttons for MAIN, PIP1, PIP2, and SCALE functions.
- Inputs Section: Dedicated buttons for selecting various input sources including HDMI 1, HDMI 2, DVI 1, DVI 2, SDI, OPT 1-1, OPT 1-2, and MOSAIC.
- Function Section: Buttons for PRESET, TEST, FREEZE, and FN (Function) operations.
2.2 Rear Panel
The rear panel houses all the input and output connectors, power supply, and control ports.
- Control Ports: Includes Ethernet (for PC control) and USB ports.
- Genlock: Input and Loop connectors for synchronization.
- Input Connectors:
- HDMI 1.4 (IN & LOOP)
- 3G-SDI (IN & LOOP)
- DVI/HDMI 1.4 (IN & LOOP)
- Output Connectors:
- 10 Gigabit Ethernet Output Ports (numbered 1-10)
- Optical Fiber Ports (OPT 1, OPT 2)
- HDMI 1.3 Output
- Power Input: AC power connector with ON/OFF switch (100-240V~, 1.5A, 50/60Hz).
3. Setup Guide
Follow these steps to set up your NovaStar VX1000 LED Display Controller.
- Unpacking and Inspection: Carefully remove the VX1000 from its packaging. Inspect the device for any signs of physical damage. Ensure all accessories are present.
- Mounting (Optional): The VX1000 can be rack-mounted using standard rack ears (if included) or placed on a stable surface. Ensure adequate ventilation around the unit.
- Connect Video Inputs: Connect your video sources (e.g., PC, media player, camera) to the appropriate input ports on the rear panel (HDMI, DVI, SDI). Use high-quality cables for optimal signal integrity.
- Connect LED Display Outputs: Connect the Ethernet output ports (1-10) to your LED display receiving cards. For long-distance transmission, utilize the optical fiber ports.
- Connect Control PC: Connect a PC to the Ethernet control port on the rear panel using a standard Ethernet cable. This PC will be used for configuration and management via NovaLCT software.
- Power Connection: Connect the provided AC power cable to the power input on the rear panel and then to a suitable power outlet.
- Power On: Flip the ON/OFF switch on the rear panel to the 'ON' position. The front panel display should illuminate, indicating the device is powering up.
4. Operating Instructions
This section outlines the basic operation of the NovaStar VX1000.
4.1 Front Panel Operation
- Input Selection: Press the corresponding button in the "INPUTS" section (e.g., HDMI 1, DVI 1) to switch between video sources.
- Menu Navigation: Use the Menu Knob to scroll through menu options on the display screen. Press the knob to confirm a selection. Press the ESC button to go back or exit a menu.
- Control Functions:
- MAIN: Switches to the main display source.
- PIP1/PIP2: Activates Picture-in-Picture modes. Configure PIP windows via software.
- SCALE: Adjusts output scaling.
- Function Buttons:
- PRESET: Recalls saved display presets.
- TEST: Activates test patterns for display calibration.
- FREEZE: Freezes the current display output.
- FN: Customizable function button.
4.2 Software Control (NovaLCT)
For advanced configuration, screen setup, and detailed control, use the NovaLCT software on a connected PC. Refer to the NovaLCT software manual for detailed instructions on:
- Screen configuration and mapping.
- Input source management and resolution settings.
- Brightness, contrast, and color adjustments.
- Picture-in-Picture (PIP) and multi-window layouts.
- Saving and recalling presets.
- Firmware updates.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your VX1000 controller.
- Cleaning:
- Regularly clean the exterior of the device with a soft, dry cloth.
- Do not use liquid cleaners or aerosols directly on the unit.
- Ensure ventilation openings are free from dust and obstructions.
- Firmware Updates: Periodically check the manufacturer's official website for new firmware versions. Updates can improve performance, add features, or fix bugs. Follow the provided instructions carefully during the update process.
- Storage: When not in use for extended periods, store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cable Management: Ensure all cables are securely connected and neatly organized to prevent accidental disconnections or damage.
6. Troubleshooting
This section provides solutions to common issues you might encounter with the VX1000.
| Problem | Possible Cause | Solution |
|---|---|---|
| No display on LED screen. |
|
|
| Image flickering or unstable. |
|
|
| Cannot control via PC. |
|
|
If the problem persists after trying these solutions, please contact technical support.
7. Specifications
Detailed technical specifications for the NovaStar VX1000 LED Display Controller.
| Feature | Detail |
|---|---|
| Model Number | NOVASTAR-VX1000 |
| Brand | Novastar |
| Input Connectors | 1x HDMI 1.4 (IN & LOOP), 1x DVI (IN & LOOP), 1x 3G-SDI (IN & LOOP) |
| Output Connectors | 10x Gigabit Ethernet ports, 1x 10G optical fiber port (OPT1), 1x HDMI 1.3 |
| Max Pixel Capacity | 6.5 million pixels |
| Max Output Width | 10,240 pixels |
| Max Output Height | 8,192 pixels |
| Processing Capability | 4K×1K@60Hz |
| Latency | Low Latency |
| Features | 3D, Pixel-level brightness and chroma calibration, Stepless output scaling, 3 Layers |
| Dimensions (Package) | 22 x 18 x 6.63 inches |
| Item Weight | 15.77 pounds |
| Color | Black |
| Manufacturer | Novastar |
| Country of Origin | China |
8. Warranty and Support
Warranty Information: This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Novastar website for detailed warranty terms and conditions.
Technical Support: For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Novastar customer support. You can typically find contact information on the official Novastar website or through your authorized dealer.
When contacting support, please have your product model number (NOVASTAR-VX1000) and serial number ready.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.