Narcissus QN-M866 Electric Knife Sharpener User Manual

1. Introduction

This manual provides instructions for the safe and effective use of your Narcissus QN-M866 Electric Knife Sharpener. This device is designed for home and kitchen use, offering a professional 2-stage sharpening and polishing system for various straight-blade knives and a dedicated slot for scissors. Please read this manual thoroughly before initial use and retain it for future reference.

2. Safety Instructions

To prevent injury or damage to the appliance, always observe the following safety precautions:

• Always place the sharpener on a stable, flat surface.
• Ensure your hands are dry before plugging in or unplugging the sharpener.
• Keep fingers away from the sharpening slots during operation.
• Do not attempt to sharpen serrated knives in the knife slots; use the dedicated scissors slot for scissors only.
• Unplug the sharpener when not in use or before cleaning.
• Do not immerse the sharpener in water or any other liquid.
• Keep out of reach of children.
• Do not operate the sharpener if the cord or plug is damaged, or if the appliance malfunctions or has been dropped.

3. Product Components

The Narcissus QN-M866 Electric Knife Sharpener features a robust design for efficient sharpening. Familiarize yourself with its main components:

• Power Switch: Located on the side, controls the sharpener's operation.
• Crude Sharpening Slot: For initial sharpening of dull blades.
• Fine Polishing Slot: For refining the blade edge and removing burrs.
• Scissors Sharpening Slot: A dedicated slot for sharpening scissors.
• Magnetic Dust Collection Box: Located at the bottom, collects metal shavings.
• Non-slip Suction Feet: For stability during use.

Figure 3.1: Overview of the Narcissus QN-M866 Electric Knife Sharpener, showing the knife and scissors sharpening capabilities.

Figure 3.2: Detailed view of the two sharpening stages: Crude for quick sharpening and Fine for polishing.

4. Setup

Before using the sharpener, follow these steps:

1. Placement: Place the sharpener on a clean, dry, and stable countertop. Ensure the non-slip suction feet are securely attached to the surface to prevent movement during operation.

Figure 4.1: Non-slip suction feet for stable operation.
2. Power Connection: Plug the power adapter into the sharpener's power port, then plug the adapter into a standard electrical outlet (100-240V).


Figure 4.2: Connecting the power adapter to the sharpener and outlet.

3. Orientation: Position the sharpener with the Narcissus logo facing you.

5. Operating Instructions

Always ensure the sharpener is powered on using the red power switch before beginning. For optimal results, read the instructions carefully and practice with an old knife first.

5.1 Sharpening Knives (2-Stage Process)

This sharpener features two stages for knives: a crude stage for initial sharpening and a fine stage for polishing.

1. Crude Sharpening (Stage 1): For very dull knives, begin with the 'Crude' slot. Insert the knife blade into the slot at an angle, ensuring it stays in close contact with the outer wall. Pull the knife from the outside (heel) to the inside (tip) of the blade, applying light, consistent pressure. Repeat this motion 2-5 times for each side of the blade.
2. Fine Polishing (Stage 2): After crude sharpening, or for knives that only need a touch-up, move to the 'Fine' slot. Insert the knife blade and pull it through from heel to tip, similar to the crude stage. This stage polishes the blade and removes any burrs, resulting in a smooth, sharp edge. Repeat 2-5 times for each side.

Figure 5.1: Step-by-step guide for knife sharpening.

Figure 5.2: Detailed view of blade insertion and pulling direction for both stages.

Important Notes:

• Always pull the knife towards you; do not push it away.
• Maintain a consistent, light pressure. Excessive force is not necessary and can damage the blade or sharpener.
• Clean the knife blade after sharpening to remove any metal particles.

5.2 Sharpening Scissors

The sharpener includes a dedicated slot for sharpening scissors.

1. Open the scissors fully.
2. Insert one blade of the scissors into the designated scissors sharpening slot.
3. Pull the blade through the slot from the pivot to the tip, applying light pressure.
4. Repeat this motion 3-5 times for each blade.
5. Test the sharpness and repeat if necessary.

Figure 5.3: Sharpening scissors using the dedicated slot.

6. Maintenance and Cleaning

Regular maintenance ensures the longevity and performance of your sharpener.

• Unplug Before Cleaning: Always unplug the sharpener from the power outlet before cleaning.
• Clean Exterior: Wipe the exterior of the sharpener with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
• Empty Dust Collection Box: The sharpener is equipped with a magnetic dust collection box at the bottom to collect metal shavings. Regularly remove and empty this box. To do so, gently slide the box out, discard the shavings, and reinsert it securely.

Figure 6.1: Removing the magnetic dust collection box for cleaning.

7. Troubleshooting

If you encounter issues with your sharpener, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Narcissus customer support.

8. Specifications

• Model: QN-M866
• Material: Stainless Steel
• Color: Silver
• Product Dimensions: 8.6"L x 2.6"W x 2.9"H
• Item Weight: 1.63 Pounds
• Power: 30-watt DC motor
• Voltage: 100-240V (Wide Voltage Design)
• Sharpening Stages: 2 (Crude & Fine)
• Additional Features: Scissors Sharpening Slot, Magnetic Dust Collection Box

9. Warranty and Customer Support

Narcissus is committed to providing exceptional customer service.

• Warranty: This product comes with a 12-month free replacement or refund policy.
• Extended Service: An extended 24-month after-sales service is also provided.
• Quality Issues: Should you encounter any quality issues, please contact Narcissus customer support immediately.
• Contact: Refer to the product packaging or the official Narcissus website for contact information.