Introduction
The Bosmere Bertilo Security Bike Store (Model A080NW) is a robust and secure storage solution designed for bicycles, including modern e-bikes, and other large items. Crafted from durable European Pine with a contemporary anthracite gray finish, this shed offers secure and weather-protected storage. Its tongue and groove construction and roofing felt ensure a dry interior, while double doors provide easy access. This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your bike store.
Figure 1: The Bosmere Bertilo Security Bike Store, showcasing its anthracite gray finish and double doors.
1. Setup and Assembly
The Bosmere Bertilo Security Bike Store is delivered in kit form and requires assembly. Full, detailed instructions are included with the product packaging. Please ensure you read these instructions thoroughly before beginning assembly. It is recommended to have at least two people for assembly due to the size and weight of components.
1.1. Pre-Assembly Checklist
- Verify all components are present against the packing list.
- Ensure you have the necessary tools (e.g., screwdriver, hammer, level, measuring tape).
- Select a level and stable site for installation, preferably on a solid foundation like concrete or paving slabs.
- Clear the assembly area of any obstructions.
1.2. Assembly Steps (General Guidelines)
- Unpack all components carefully, checking for any damage.
- Assemble the base frame according to the provided diagrams.
- Attach the wall panels, ensuring the tongue and groove sections fit securely.
- Install the roof structure and apply the roofing felt for weather protection.
- Mount the double doors, ensuring they swing freely and align correctly.
- Install the locking mechanism and any additional security features.
Figure 2: The assembled bike store positioned in an outdoor setting, demonstrating its compact footprint.
Figure 3: The bike store with one door open, revealing ample space for bicycle storage.
2. Operation
The Bertilo Security Bike Store is designed for straightforward operation, primarily focusing on secure access and storage.
2.1. Opening and Closing the Doors
- To open, unlock the main door using the provided key.
- Unlatch any internal bolts or latches on the secondary door to fully open both doors.
- To close, ensure both doors are properly aligned and close the secondary door first, securing any internal latches. Then close the main door and lock it.
Figure 4: Detail of the lock mechanism, highlighting the key entry point for secure closure.
Figure 5: An internal view of the robust security bolt, ensuring the secondary door remains firmly closed.
Figure 6: A close-up of the durable hinge mechanism, designed for smooth and secure door operation.
Figure 7: The external latch mechanism, providing additional security and stability for the doors.
3. Maintenance
Regular maintenance will prolong the life and appearance of your Bosmere Bertilo Security Bike Store.
3.1. General Care
- Cleaning: Periodically clean the exterior with a soft brush and mild detergent to remove dirt, dust, and debris. Rinse thoroughly with water. Avoid abrasive cleaners.
- Wood Treatment: As the shed is crafted from European Pine, it is recommended to apply a suitable wood preservative or stain annually to protect against weathering, UV damage, and fungal growth. This will help maintain its structural integrity and appearance.
- Roofing Felt: Inspect the roofing felt periodically for any tears, cracks, or signs of wear. Repair or replace as necessary to ensure continued weather protection and prevent water ingress.
- Hardware: Check all hinges, latches, and the locking mechanism regularly. Lubricate moving parts with a suitable lubricant to ensure smooth operation and prevent rust. Tighten any loose screws.
- Foundation: Ensure the base remains level and free from standing water to prevent moisture damage to the shed's base.
4. Troubleshooting
This section addresses common issues you might encounter with your bike store.
| Problem | Possible Cause | Solution |
|---|---|---|
| Doors do not close or align properly. | Uneven ground; loose hinges; warped wood. | Ensure the shed is on a level surface. Tighten hinge screws. If wood is warped, consider adjusting hinges or applying wood treatment. |
| Lock mechanism is stiff or not working. | Lack of lubrication; debris in lock; misalignment. | Apply graphite lubricant to the lock. Clean any debris. Check door alignment and adjust if necessary. |
| Water ingress inside the shed. | Damaged roofing felt; gaps in tongue and groove panels; improper door sealing. | Inspect roofing felt for damage and repair. Check panel joints and seal any gaps with appropriate sealant. Ensure doors close tightly and consider adding weather stripping if needed. |
| Wood appears discolored or shows signs of rot. | Lack of wood treatment; prolonged exposure to moisture. | Apply a suitable wood preservative or stain. Ensure proper drainage around the shed. For significant rot, consult a professional for repair or replacement of affected sections. |
5. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Bosmere |
| Model Number | A080NW |
| Color | Gray (Anthracite) |
| Material | Pine |
| Item Weight | 335 Pounds |
| Product Dimensions (L x W x H) | 79.5 x 41.5 x 55.5 inches |
| Style | Bike shed |
| Base Material | Wood |
| Top Material Type | Pine |
| Water Resistance Level | Water Resistant |
| Frame Material | Wood |
| Door Style | Double Hinged, Lockable |
| Assembly Required | Yes |
| Manufacturer | Rowlinson |
| UPC | 641341010800 |
6. Warranty Information
Specific warranty details for the Bosmere Bertilo Security Bike Store are typically provided with the product packaging or can be obtained directly from the manufacturer or authorized retailer. Please retain your proof of purchase for any warranty claims. Generally, warranties cover defects in materials and workmanship under normal use.
For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Bosmere website.
7. Customer Support
If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact Bosmere customer support or your retailer.
- Manufacturer: Rowlinson (for Bosmere products)
- Online Resources: Visit the Bosmere Store on Amazon for product information and updates.
- Contact: Refer to the contact information provided in your product packaging or on the official Bosmere website for direct support.
