1. Introduction
Thank you for choosing the Salter 9183 SV3R Digital Body Composition Scale. This manual provides essential information for the safe and effective use of your new scale. Please read these instructions thoroughly before first use and keep them for future reference. This scale is designed to measure your weight, body water percentage, body fat percentage, muscle mass, bone mass, Body Mass Index (BMI), and Basal Metabolic Rate (BMR).
2. Important Safety Information
- This scale uses Bio-electrical Impedance Analysis (BIA) to estimate body composition. A small, safe electrical current passes through the body. This method is not recommended for individuals with pacemakers or other internal medical devices. Consult your doctor if you have concerns.
- Do not use this scale on wet or slippery surfaces. Ensure the scale is placed on a firm, flat surface for accurate readings.
- Do not immerse the scale in water or use abrasive cleaning agents.
- Keep out of reach of children.
- The scale is designed for domestic use only.
- Maximum weight capacity is 180 kg (396 lb / 28 st 5 lb). Do not exceed this limit.
- Always step onto the scale with bare, dry feet for body composition measurements.
3. Product Features
The Salter 9183 SV3R scale offers advanced features for comprehensive health monitoring:
- Multi-Measurement Dashboard: Displays weight, body water, body fat, muscle mass, bone mass, BMI, and BMR simultaneously on a large, easy-to-read LCD screen.
- Bio-electrical Impedance Analysis (BIA): Provides accurate body composition measurements.
- 12-User Memory: Stores personal data for up to 12 individuals, allowing for personalized tracking.
- Athlete Mode: Optimized for individuals with higher muscle mass and lower body fat.
- Instant Weight Reading: Step-on technology for immediate weight measurement.
- High Capacity: Supports up to 180 kg (396 lb / 28 st 5 lb).
- Durable Design: Constructed with a sleek glass platform.
4. Setup
4.1 Battery Installation
Your scale requires 3 x AAA batteries (included). To install or replace batteries:
- Turn the scale over and locate the battery compartment on the underside.
- Open the battery compartment cover.
- Insert 3 x AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.

Image: The Salter 9183 SV3R scale shown with three AAA batteries, illustrating the power source for the device.
4.2 Unit Selection
Before first use, you may need to select your preferred unit of measurement (kilograms, pounds, or stones). The unit switch is located on the underside of the scale. Press the button to cycle through kg, lb, and st until your desired unit is displayed.
5. User Profile Setup
To utilize the body composition analysis features, you must set up a personal user profile. The scale can store data for up to 12 users.
- Enter Setup Mode: With the scale off, press the 'SET' button (often represented by a circle icon on the display or a physical button near the display). The display will show a flashing user number (e.g., P1).
- Select User Number: Use the '<' or '>' arrow buttons to select an empty user number (P1-P12). Press 'SET' to confirm.
- Set Gender: The gender icon will flash. Use '<' or '>' to select male or female. Press 'SET' to confirm.
- Set Height: The height value will flash. Use '<' or '>' to adjust your height. Hold the button for faster adjustment. Press 'SET' to confirm.
- Set Age: The age value will flash. Use '<' or '>' to adjust your age. Press 'SET' to confirm.
- Athlete Mode (Optional): If you are an athlete (someone who engages in intense physical activity for 10-12 hours per week and has a resting heart rate of 60 beats per minute or less), the athlete icon will flash. Use '<' or '>' to select 'ON' or 'OFF'. Press 'SET' to confirm.
- The scale will then display '0.0' and is ready for use.
Repeat this process for each user. Ensure each user selects their correct profile number before taking a measurement.
6. Operating Instructions
6.1 Taking a Weight Measurement Only
- Place the scale on a firm, flat surface.
- Gently tap the center of the scale with your foot to activate it. Wait for '0.0' to appear on the display.
- Step onto the scale with your feet evenly distributed. Remain still until your weight is displayed and flashes.
- The scale will automatically turn off after a few seconds.
6.2 Taking Body Composition Measurements
For body composition analysis, you must have a user profile set up and step on with bare, dry feet.
- Place the scale on a firm, flat surface.
- Press the '<' or '>' arrow buttons to select your user profile number (P1-P12).
- Wait for '0.0' to appear on the display.
- Step onto the scale with bare, dry feet, ensuring your feet are positioned over the metal electrodes. Stand still.
- The scale will first display your weight, then cycle through your body composition readings (Body Fat, Body Water, Muscle Mass, Bone Mass, BMI, BMR).
- All readings will be displayed on the dashboard simultaneously for a few seconds before the scale turns off.

Image: The Salter 9183 SV3R scale showing '0.0 kg' on its display, indicating it is ready for a measurement.
7. Understanding Your Readings
The Salter 9183 SV3R provides a comprehensive overview of your body composition. Here's a brief explanation of each metric:
- Weight: Your total body mass.
- Body Fat (%): The percentage of your total body weight that is fat.
- Body Water (%): The percentage of your total body weight that is water. Essential for overall health.
- Muscle Mass (%): The percentage of your total body weight that is muscle.
- Bone Mass (%): The percentage of your total body weight that is bone mineral.
- BMI (Body Mass Index): A measure that uses your height and weight to work out if your weight is healthy.
- BMR (Basal Metabolic Rate): The minimum number of calories required to keep your body functioning at rest.

Image: A detailed view of the scale's LCD dashboard, simultaneously displaying various body composition metrics such as weight, body fat, body water, and BMI.
Note: Body composition measurements are estimates and should be used for reference only. Consult a healthcare professional for personalized health advice.
8. Maintenance and Care
- Cleaning: Wipe the scale surface with a damp cloth and mild detergent. Do not use chemical cleaning agents or abrasive pads.
- Storage: Store the scale in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Replacement: Replace batteries when the 'Lo' indicator appears on the display. Remove batteries if the scale will not be used for an extended period.
- Avoid Impact: Do not drop the scale or subject it to heavy impact, as this may damage the glass platform or internal components.
9. Troubleshooting
| Problem | Solution |
|---|---|
| 'Lo' displayed | Low battery. Replace all 3 x AAA batteries. |
| 'Err' displayed | Overload error or measurement error. Ensure weight does not exceed 180 kg. Step off the scale, wait for it to reset, and try again. If it persists, ensure feet are bare and dry for body composition. |
| Inaccurate readings | Ensure the scale is on a hard, flat surface (not carpet). Recalibrate by stepping on, waiting for '0.0', then stepping off. Ensure bare, dry feet for body composition. |
| No display / Scale won't turn on | Check battery installation and ensure batteries are new and correctly inserted. |
10. Specifications
- Model: Salter 9183 SV3R
- Maximum Capacity: 180 kg / 396 lb / 28 st 5 lb
- Measurement Units: kg, lb, st
- Display Type: LCD
- Dimensions (L x W x H): 30 x 30 x 2.5 cm (approximately 11.8 x 11.8 x 1 inches)
- Weight: 2 kg (approximately 4.4 lbs)
- Material: Glass platform
- Power Source: 3 x AAA batteries (included)
- User Memory: 12 users
11. Warranty and Support
Salter products are manufactured to high-quality standards. For warranty information, product support, or to register your product, please refer to the warranty card included with your purchase or visit the official Salter website. Please retain your proof of purchase for any warranty claims.