Smatree VR100-00

Smatree VR100-00 Charging Dock for Quest 2 Instruction Manual

Model: VR100-00 | Brand: Smatree

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Smatree VR100-00 Charging Dock for Quest 2. This dock is designed to simultaneously charge your Quest 2 VR headset and two Touch controllers, offering a convenient storage and charging solution. It is also compatible with the Elite Strap.

Smatree VR100-00 Charging Dock for Quest 2

Image: The Smatree VR100-00 Charging Dock, a white dock designed for charging and storing the Quest 2 VR headset and its controllers.

Package Contents

Please verify that all items listed below are included in your package:

  • Smatree Quest 2 Charging Stand
  • 2 x 1800 mAh Rechargeable AA Batteries (customized for controllers)
  • 2 x USB-C Cables
  • 2 x Controller Covers
Contents of Smatree VR100-00 Charging Dock package

Image: All components included in the Smatree VR100-00 Charging Dock package, including the dock, two rechargeable batteries, two USB-C cables, and two controller covers.

Setup Instructions

1. Install Rechargeable Batteries in Controllers

  1. Open the battery compartment on your Quest 2 Touch controller.
  2. Insert one of the provided 1800 mAh rechargeable AA batteries into the controller, ensuring correct polarity.
  3. Replace the original controller cover with the provided Smatree controller cover. This cover is designed to allow charging via the dock's contact points.
  4. Repeat for the second controller.
Steps for installing rechargeable batteries and covers in Quest 2 controllers

Image: A four-panel image demonstrating the process of inserting the rechargeable battery, replacing the controller cover, positioning the controller on the magnetic charging point, and initiating charging.

2. Connect the Charging Dock to Power

  • Connect one end of a USB-C cable to the charging dock's input port.
  • Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a powered USB port.
  • Ensure the power source provides sufficient output for optimal charging.

Operating Instructions

Charging the VR Headset

  1. Locate the headset charging cable extension on the bottom of the charging dock.
  2. Connect your Quest 2 VR headset to the USB-C connector on the dock.
  3. Place the VR headset onto the designated slot on the charging dock. Ensure it sits securely.
  4. The charging indicator on the dock will illuminate red when charging and turn green when fully charged.
Steps for charging Quest 2 VR headset on the Smatree dock

Image: A four-panel image illustrating how to extend the headset cable from the dock, connect it to the VR headset, place the headset on the dock, and observe the charging indicator lights (red for charging, green for fully charged).

Note: The Smatree charging dock is compatible with the Elite Strap. You can charge your Quest 2 with the Elite Strap attached.

Smatree charging dock compatible with Quest 2 Elite Strap

Image: The Smatree charging dock with a Quest 2 VR headset and Elite Strap attached, demonstrating compatibility and proper fit for charging.

Charging the Touch Controllers

  1. With the special controller covers and rechargeable batteries installed, gently place each Touch controller onto its designated charging slot on the dock.
  2. The controllers will align magnetically with the charging contacts. Ensure a firm connection.
  3. The charging indicator for each controller will illuminate red when charging and turn green when fully charged.
Steps for charging Quest 2 Touch controllers on the Smatree dock

Image: A four-panel image illustrating how to insert the rechargeable battery, replace the controller cover, position the controller on the magnetic charging point, and initiate charging.

Smatree charging dock simultaneously charging Quest 2 headset and controllers

Image: The Smatree charging dock with a Quest 2 headset and two controllers simultaneously connected and charging. Icons indicate fast charging (2.5 hours), 1800mAh x2 rechargeable batteries, and 2000+ recycle times.

The charging dock is designed to charge the VR headset and two controllers simultaneously in approximately 2.5 hours.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the charging dock. Avoid using abrasive cleaners or solvents.
  • Storage: When not in use, store the charging dock in a cool, dry place away from direct sunlight and extreme temperatures. The dock also serves as a convenient storage solution for your VR unit and controllers.
  • Battery Care: The included rechargeable batteries are designed for long life. For optimal performance, avoid fully discharging them frequently.

Troubleshooting

ProblemPossible CauseSolution
Controllers not charging.
  • Incorrect battery installation.
  • Controller not properly seated on charging contacts.
  • Original controller covers used instead of Smatree covers.
  • Ensure rechargeable batteries are inserted with correct polarity.
  • Gently adjust the controller on the dock to ensure magnetic contacts align.
  • Verify that the Smatree controller covers are installed.
Headset not charging.
  • USB-C cable not fully connected to headset or dock.
  • Headset not properly seated.
  • Check all USB-C connections.
  • Ensure the headset is placed firmly in its slot on the dock.
No devices charging / Dock not powering on.
  • Power cable disconnected.
  • Faulty power adapter or USB port.
  • Verify the USB-C power cable is securely connected to the dock and power source.
  • Try a different USB power adapter or USB port.

Specifications

  • Model Number: VR100-00
  • Brand: Smatree
  • Color: White
  • Compatible Devices: Quest 2 VR Headset, Quest 2 Touch Controllers
  • Special Feature: Fast Charging, Simultaneous Charging, Elite Strap Compatibility
  • Connectivity Technology: USB-C
  • Rechargeable Batteries: 2 x 1800 mAh AA (customized)
  • Charging Time: Approximately 2.5 hours (for headset and controllers simultaneously)
  • Item Weight: 0.57 Kilograms

Warranty and Support

The Smatree VR100-00 Charging Dock comes with a 1-year warranty. If you encounter any issues or have questions regarding your product, please contact Smatree customer support for assistance.

For support, please visit the official Smatree website or refer to the contact information provided with your purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.