GAN 12 Maglev UV Speed Cube Instruction Manual

Introduction

The GAN 12 Maglev UV is a flagship 3x3 stickerless speed cube designed for optimal performance and customization. Featuring innovative Magnetic GES technology and Enhanced Core Positioning 2.0, it offers a frictionless feel, auto-aligning capabilities, and extensive tuning options for cubers of all levels.

Figure 1: GAN 12 Maglev UV Speed Cube, showcasing its vibrant stickerless design.

Safety Information

This product is not suitable for children under 36 months due to small parts which may present a choking hazard.

What's in the Box

• GAN 12 Maglev UV Speed Cube
• Tuning Rod + Hexagonal Magnets Rod*8
• GAN BOX v8s
• GAN Pocket
• AI Tutorial Card
• LBL & CFOP Tutorial
• ID Card

Figure 2: Included accessories for the GAN 12 Maglev UV Speed Cube, including tuning tools and tutorials.

Setup and Customization

The GAN 12 Maglev UV offers extensive customization options to fine-tune your cubing experience. This includes adjusting center piece travel, spring tension, and magnet strength. There are 252 customization options available.

Understanding GAN Elasticity Systems (GES)

GAN cubes utilize various GES systems to allow for precise adjustments. The GAN 12 Maglev features the innovative Magnetic GES and Enhanced Core Positioning 2.0.

Magnetic GES (GAN 12 Maglev)

This system uses repelling magnets instead of traditional springs, providing a frictionless feel and eliminating spring noise. It offers 6 levels of elasticity, 6 levels of center travel, and 7 levels of magnet strength.

Figure 3: Illustration of the Magnetic Levitation system within the GAN 12 Maglev, showing the repulsion mechanism.

Figure 4: Enhanced Core Positioning 2.0, highlighting the magnetic core and magnet bar for improved stability and auto-aligning.

Figure 5: Overview of the three main features: Magnetic Levitation Handfeel, 30°+ Auto-aligning, and 36 Configurations for numerical tuning.

Figure 6: GMS v3 (GAN Magnetic System) showing 7 magnet settings for precise magnetic strength adjustment.

Adjusting Travel and Tension

To adjust the travel distance, use the provided tuning tool to screw the numerical tuning nut. For tension, screw the magnet nut clockwise or counter-clockwise. Each click or notch corresponds to a specific level of adjustment. Refer to the included tutorials for detailed step-by-step instructions on using the tuning tools and understanding the different settings.

Figure 7: Exploded view of the GES Pro+ system, illustrating the numerical distancing nut and numerical tension nut for fine-tuning.

Operating the Speed Cube

The GAN 12 Maglev UV is designed for smooth and fast turning. Its auto-aligning technology helps complete turns when the face reaches 30 degrees from the finish, making it highly forgiving and fluid for speedcubing.

• Holding the Cube: Hold the cube firmly but gently, allowing your fingers to move freely across the faces.
• Turning: Apply consistent pressure when turning. The magnetic repulsion system ensures a stable and quiet turn.
• Corner Cutting: The cube's design allows for excellent corner cutting, enabling faster and more efficient turns even if your alignment isn't perfect.

Maintenance

To ensure the longevity and optimal performance of your GAN 12 Maglev UV Speed Cube, follow these maintenance tips:

• Cleaning: Wipe the cube surfaces with a soft, dry cloth to remove dust and fingerprints. Avoid using harsh chemicals or abrasive materials.
• Lubrication: While the Maglev system reduces the need for traditional spring lubrication, occasional application of high-quality speed cube lubricant can further enhance the turning feel. Apply a small amount to the internal contact points and work it in by turning the cube.
• Storage: Store the cube in its original GAN BOX or a protective pouch to prevent dust accumulation and scratches.
• Avoid Extreme Temperatures: Do not expose the cube to extreme heat or cold, as this can affect the plastic and magnetic components.

Troubleshooting

Here are some common issues and their potential solutions:

• Pieces Popping Out: If a piece pops out, it is generally not broken. Simply reinsert the piece by aligning it correctly and gently pressing it back into place. This can happen if the tension settings are too loose.
• Cube Feels Loose or Too Tight: Adjust the tension settings using the provided tuning tools as described in the "Setup and Customization" section. Experiment with different settings to find your preferred feel.
• Unusual Noise: Some users may experience a "clicky" sound after extended use. This can often be resolved by re-lubricating the internal mechanisms or adjusting the tension. Online tutorials may offer specific methods for addressing this.
• Reduced Performance: If the cube feels sluggish, ensure it is clean and properly lubricated. Check the tension and magnet settings to confirm they are optimal for your solving style.

Specifications

Warranty and Support

GAN Cube is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, you can connect with the GAN team for support regarding missing accessories or any unpleasant experience.

For the latest news on GAN products, to join fan groups, or to provide feedback for future models, please visit the official GAN Cube store or contact their customer service team.

Each item has a unique code that is verified before shipping, ensuring product authenticity.