Introduction
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Featherlite Amaze Project Arm Chair (Mid Back - Grey). Please read these instructions carefully before use to ensure proper function and longevity of your chair.
Safety Information
Important: Only use this product for its intended seating purpose. Do not stand on the chair or use it as a ladder. Ensure all components are securely fastened before use.
Setup and Assembly
The Featherlite Amaze Project Arm Chair requires self-assembly. An installation kit is included with your purchase. Follow these steps for proper assembly:
- Unpack all components from the box. Verify that all included components are present: 1 leaf, 2 leaves, 3 leaves, 4 leaves, and the installation kit. (Note: The 'leaves' mentioned in the component list likely refer to parts of the chair or packaging. Please refer to the specific assembly diagram in your physical kit for exact identification.)
- Identify the base, casters, gas lift, seat, backrest, and armrests.
- Attach the casters to the chair base.
- Insert the gas lift into the center of the base.
- Secure the seat to the gas lift and base assembly.
- Attach the backrest to the seat assembly.
- Install the armrests, ensuring they are firmly attached.
- Once assembled, ensure all screws and connections are tightened.

Image: Front view of the Featherlite Amaze Project Arm Chair, showing the seat, backrest, armrests, and base with casters. This image represents the fully assembled chair.
Operating Instructions
Your Featherlite Amaze Project Arm Chair is designed with several adjustable features to enhance your comfort and support.
1. Lumbar Support Adjustment
The chair features an adjustable lumbar support to regulate its height independently of the seat back. This allows for personalized lower back support.
- Locate the lumbar support mechanism on the backrest.
- Adjust the support up or down to find your optimal ergonomic posture.

Image: Rear view of the chair, illustrating the adjustable lumbar support mechanism on the backrest.
2. Armrest Height Adjustment
The armrests are height-adjustable to accommodate users of different body heights, promoting proper arm and shoulder alignment.
- Locate the adjustment button or lever on the side of each armrest.
- Press the button/lift the lever and move the armrest up or down to your desired height. Release to lock.

Image: Side view of the chair, illustrating the adjustable armrests.
3. Reclining and Multilock Mechanism
The chair features a superior multilock mechanism that adapts to your weight for optimal resistance without manual adjustment, allowing for effortless reclining.
- To recline, lean back gently. The mechanism will adjust to your weight.
- To lock the recline position, use the lever located under the seat (refer to your physical product for exact lever placement).
4. Seat Height Adjustment (Gas Lift)
The Class 4 pneumatic gas lift allows for smooth and precise seat height adjustments.
- To raise the seat: While seated, lift the lever located under the seat (typically on the right side) and slightly lift your weight off the seat. The seat will rise. Release the lever at the desired height.
- To lower the seat: While seated, lift the lever and apply your weight to the seat. The seat will lower. Release the lever at the desired height.
Maintenance and Care
Proper care ensures the longevity and appearance of your Featherlite Amaze Project Arm Chair.
- Cleaning: In case the product appears to lack shine, wiping the surface with a soft, dry cloth will help clear the surface of dust particles. For deeper cleaning, use a mild soap solution and a damp cloth, then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Casters: Periodically check the nylon casters for any accumulated debris (hair, dust, etc.) and clean them to ensure smooth rolling and flexibility.
- Fasteners: Regularly inspect all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
Troubleshooting
This section addresses common issues you might encounter with your chair.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not adjust height | Gas lift malfunction or lever not engaged properly. | Ensure the height adjustment lever is fully engaged. If the issue persists, the gas lift may need replacement. Contact customer support. |
| Chair feels unstable or wobbly | Loose fasteners or improper assembly. | Check all screws and bolts, especially where the seat, backrest, and armrests connect to the base. Tighten any loose fasteners. Refer to assembly instructions. |
| Casters not rolling smoothly | Debris caught in casters or damaged casters. | Turn the chair over and carefully remove any hair, dust, or debris from the caster wheels. If casters are damaged, they may need replacement. |
| Backrest does not recline or lock | Multilock mechanism issue or lever not engaged. | Ensure the recline lock lever is disengaged for reclining. If the mechanism is stuck, gently rock the chair while attempting to adjust. If the problem persists, contact support. |
Product Specifications
| Brand | Featherlite |
| Model Name | Amaze Project Arm Chair (Mid Back - Grey) |
| Colour | Grey (Note: Product data also lists 'Black' as a color, but this manual is for the 'Mid Back - Grey' variant.) |
| Material | Polypropylene (Frame), Cushion (Seat), Foam (Fill) |
| Product Dimensions (D x W x H) | 48D x 66W x 124H Centimeters |
| Item Weight | 17 Kilograms |
| Maximum Weight Recommendation | 150 Kilograms |
| Back Style | Solid Back with AN70 Mesh |
| Frame Material | Nylon |
| Special Features | Adjustable Height, Adjustable Lumbar, Arm Rest, Ergonomic, Rolling |
| Gas Lift | Class 4 Pneumatic |
| Assembly | Self-assembly required, installation kit included |
| Recommended Uses | Office, Home Office, Living Room, Study Room, Bedroom |
| Country of Origin | India |
Warranty Information
Your Featherlite Amaze Project Arm Chair comes with a 3-year warranty covering manufacturing defects. This warranty ensures that your product is free from defects in materials and workmanship under normal use.
For warranty claims or to understand the full terms and conditions, please contact Featherlite customer support.
Customer Support
For any assistance, questions, or concerns regarding your Featherlite Amaze Project Arm Chair, please contact our customer support team:
- Phone: 08047191010
- Email: customercare@featherlitefurniture.com
- Manufacturer: Featherlite