Patriot Lighting Connell Matte Black 3-Light Vanity Light Instruction Manual

1. Introduction

This instruction manual provides detailed guidance for the safe installation, operation, and maintenance of your Patriot Lighting Connell Matte Black 3-Light Vanity Light, Model 20738. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Patriot Lighting Connell vanity light is designed to provide illumination in various indoor settings, including bathrooms and hallways. It features a modern style with a matte black finish and three light sources, offering the flexibility for either upward or downward light direction.

2. Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.

• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
• Ensure the fixture is securely mounted to a structural element of the building.
• Do not exceed the maximum wattage specified for the bulbs.
• Handle glass components with care to prevent breakage.
• Keep flammable materials away from the light fixture when in use.
• This fixture is intended for indoor use only.

3. Package Contents

Verify that all components listed below are present before discarding packaging materials.

• Patriot Lighting Connell 3-Light Vanity Light Fixture (Model 20738)
• Mounting Hardware Kit (screws, wire nuts, mounting plate)
• Installation Instructions (this manual)

Note: Three medium base bulbs are required and are not included with this fixture.

4. Specifications

5. Setup and Installation

Before you begin, ensure the power is turned off at the circuit breaker. Gather the necessary tools, which typically include a screwdriver, wire strippers, and electrical tape.

5.1 Mounting the Fixture

1. Carefully unpack all components and inspect for any damage.
2. Attach the mounting plate to the electrical junction box using the provided screws. Ensure it is securely fastened.
3. Determine the desired orientation for the light direction (up or down). The fixture can be installed with the glass shades facing upwards or downwards.

Image: Front view of the Patriot Lighting Connell 3-Light Vanity Light, showing the matte black bar and three clear glass shades. This view helps in understanding the fixture's orientation during installation.

5.2 Electrical Connections

1. Connect the fixture's white wire to the white (neutral) wire from the junction box using a wire nut.
2. Connect the fixture's black wire to the black (hot) wire from the junction box using a wire nut.
3. Connect the fixture's ground wire (usually bare copper or green) to the ground wire from the junction box and to the mounting plate's ground screw.
4. Carefully tuck all wires into the junction box.

5.3 Securing the Fixture and Installing Bulbs

1. Align the fixture's canopy with the mounting plate and secure it with the provided screws.
2. Install three medium base (E26) bulbs (not included) into the sockets. Do not overtighten.
3. Carefully attach the glass shades to the fixture according to the specific design.

Image: The Patriot Lighting Connell 3-Light Vanity Light shown installed in a bathroom setting, positioned above a mirror and vanity. This illustrates a typical installation scenario.

6. Operation

Once installation is complete and verified, restore power at the circuit breaker. The light fixture is operated via a standard wall switch connected to the electrical circuit. If a remote control method is desired, it must be integrated through a compatible wall switch or smart home system (not included with this fixture).

6.1 Bulb Replacement

To replace a bulb, ensure the power is turned off at the wall switch and preferably at the circuit breaker. Allow bulbs to cool completely before touching. Unscrew the old bulb and screw in a new medium base (E26) bulb of the appropriate wattage. Do not exceed the maximum wattage indicated on the fixture.

Image: A top-down view of the vanity light, clearly showing the three bulb sockets. This perspective is useful for understanding bulb insertion and replacement.

7. Maintenance

Regular cleaning will help maintain the appearance and performance of your vanity light.

• Cleaning: Turn off the power and allow the fixture to cool. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. For glass shades, a mild glass cleaner can be used, applied to a cloth first, not directly to the fixture.
• Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.

8. Troubleshooting

If you encounter issues with your vanity light, refer to the following common problems and solutions:

• Light does not turn on:
  • Check if the power is on at the circuit breaker.
  • Ensure the wall switch is in the 'ON' position.
  • Verify that bulbs are correctly installed and not burnt out.
  • Check wiring connections for proper contact.
• Light flickers:
  • Ensure bulbs are screwed in tightly.
  • Check for loose wiring connections.
  • Replace bulbs to rule out faulty bulbs.
• Fixture is loose:
  • Turn off power and re-tighten mounting screws.

If problems persist, consult a qualified electrician or contact customer support.

9. Warranty and Support

This Patriot Lighting Connell Matte Black 3-Light Vanity Light (Model 20738) includes a 5-year manufacturer warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical assistance, or any questions regarding your product, please contact Patriot Lighting customer service. Keep your proof of purchase for warranty validation.

For more information, you may visit the official Patriot Lighting website or contact their support channels.