Introduction
The Televes DATBOSS LR Mix is a state-of-the-art long-range over-the-air TV antenna designed to optimize the reception of television signals. It automatically adapts its gain in real time to ensure the optimum level of signal is delivered at all times. This antenna is specifically engineered for US broadcast frequencies, offering improved gain and range over previous models. It includes integrated 5G signal filtering above 608 MHz and provides independent amplification for both VHF and UHF bands. The DAT BOSS LR Mix is capable of receiving weak distant signals while preventing overload from strong signals, making it ideal for challenging long-range and fringe reception scenarios.
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your Televes DATBOSS LR Mix antenna. Please read this manual thoroughly before proceeding with installation to ensure safe and optimal performance.
Key Features
- Pulls in UHF and VHF signals from up to 80 miles away.
- Crystal clear TV reception enabled by a built-in TForce preamplifier that automatically adjusts its gain independently for VHF-High and UHF signals for an optimum no-compromise performance.
- FM and LTE/5G filtering eliminates radio and cellular phone interference.
- Redesigned for reception of TV signals on RF channels 7-36 improving gain and range over previous generations.
- DAT design, based on 3 yagi antennas with asymmetric directors, provides great directivity as well as an optimal anti-echo radiation pattern.
Package Contents
Upon opening the package, please verify that all components are present and undamaged. The Televes DATBOSS LR Mix antenna package typically includes:
- Televes DATBOSS LR Mix Antenna Assembly
- UL-listed Power Supply (with 2 outputs)
- Assembly Tools (as required for antenna construction)
- Instruction Manual (this document)
If any parts are missing or damaged, please contact Televes customer support immediately.
Safety Information
Always prioritize safety during installation and maintenance. Failure to follow these safety guidelines may result in injury or damage to property.
- Electrical Safety: Never install the antenna near power lines. Contact with power lines can be fatal. If the antenna or mast should fall, it could come into contact with power lines.
- Weather Conditions: Do not install or adjust the antenna during lightning storms, high winds, or other severe weather conditions.
- Stable Mounting: Ensure the antenna is securely mounted to a stable structure that can withstand wind and other environmental factors.
- Personal Protective Equipment (PPE): Wear appropriate safety gear, including gloves, safety glasses, and non-slip footwear, when working on the antenna.
- Ladder Safety: Use a sturdy ladder and ensure it is properly secured before climbing. Have someone spot you if possible.
- Tool Handling: Use tools correctly and ensure they are in good working condition.
Setup and Installation
1. Antenna Assembly
The DATBOSS LR Mix antenna requires assembly before installation. Refer to the detailed assembly instructions provided in the separate assembly guide or the official Televes assembly video for step-by-step visual guidance. Ensure all elements are securely fastened according to the instructions.
Figure 1: Televes DATBOSS LR Mix antenna components. This image shows the various elements of the antenna, including the main boom, reflectors, and directors, laid out before assembly. The central orange housing for the TForce amplifier is visible.
Figure 2: Fully assembled Televes DATBOSS LR Mix antenna. This image provides an angled view of the complete antenna, showcasing its triple boom design and the arrangement of its elements.
2. Choosing an Installation Location
The ideal location for your antenna is outdoors, as high as possible, and with a clear line of sight to broadcast towers. Obstructions like trees, buildings, and hills can significantly reduce signal strength. Use online tools (e.g., AntennaWeb.org, FCC DTV Reception Maps) to identify the direction of local broadcast towers and the types of signals (UHF/VHF) available in your area.
- Rooftop Mounting: Provides the best line of sight and signal reception. Requires proper grounding and secure mounting.
- Attic Mounting: Can be an option if outdoor mounting is not feasible, but signal strength may be reduced due to building materials.
- Mast/Pole Mounting: Ensure the mast is sturdy and properly secured to prevent movement in wind.
Figure 3: Televes DATBOSS LR Mix antenna mounted. This image illustrates the antenna attached to a mounting pole, ready for outdoor installation.
3. Antenna Orientation
Once mounted, point the antenna towards the primary broadcast towers in your area. Slight adjustments may be necessary to optimize reception for all desired channels. The DATBOSS LR Mix is a directional antenna, meaning it performs best when pointed directly at the signal source.
4. Connecting the Antenna
- Connect a coaxial cable from the antenna's output to the input of the included UL-listed power supply.
- Connect one or both outputs of the power supply to your TV(s) or distribution amplifier using coaxial cables.
- Plug the power supply into a standard electrical outlet. The TForce amplifier within the antenna requires power from this supply to function.
The integrated TForce amplifier automatically adjusts gain for optimal signal levels, and the built-in FM and 5G filters help prevent interference from other signals.
Operating Instructions
1. Scanning for Channels
After connecting the antenna and power supply, you must perform a channel scan on your television. This process allows your TV to detect and save available over-the-air channels.
- Access your TV's menu (usually via the "Menu" or "Settings" button on your remote).
- Navigate to the "Channel Setup," "Antenna Setup," or "Tuner" section.
- Select "Antenna" or "Air" as the input source (not "Cable").
- Choose the "Auto Program," "Auto Scan," or "Channel Scan" option.
- Allow the TV to complete the scan. This may take several minutes.
Once the scan is complete, your TV should display the number of channels found. You can then browse through the channels using your TV remote.
2. Signal Optimization
The DATBOSS LR Mix features a TForce amplifier with automatic gain control. This intelligent system continuously adjusts the signal level to provide optimal reception, preventing both signal loss from weak signals and overload from strong signals. No manual adjustment of the amplifier is typically required.
If you experience issues with specific channels, try making small, incremental adjustments to the antenna's direction and then re-scan for channels. Sometimes, even a slight change in orientation can significantly improve reception.
Maintenance
The Televes DATBOSS LR Mix antenna is designed for durability and requires minimal maintenance. However, periodic checks can help ensure its longevity and optimal performance.
- Annual Inspection: At least once a year, visually inspect the antenna, mounting hardware, and coaxial cables for any signs of wear, corrosion, or damage. Check for loose connections.
- Cleaning: If the antenna accumulates excessive dirt, dust, or debris, gently clean it with a soft cloth and mild detergent. Avoid using abrasive cleaners or high-pressure water. Ensure the antenna is dry before re-applying power.
- Weather Damage: After severe weather events (e.g., heavy storms, strong winds), inspect the antenna for any physical damage or misalignment.
- Cable Integrity: Ensure coaxial cables are not kinked, frayed, or exposed to excessive UV radiation, which can degrade their performance. Replace damaged cables promptly.
Always disconnect power to the antenna's power supply before performing any maintenance or inspection.
Troubleshooting
If you encounter issues with your Televes DATBOSS LR Mix antenna, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Signal / "No Channels Found" |
|
|
| Poor Picture Quality / Pixelation |
|
|
| Missing Specific Channels |
|
|
If troubleshooting steps do not resolve the issue, please contact Televes customer support for further assistance.
Specifications
The following table outlines the key technical specifications for the Televes DATBOSS LR Mix antenna (Model 149884):
Figure 4: Televes DATBOSS LR Mix antenna dimensions. This diagram provides a top-down and side view of the antenna with key measurements, including its length (83.87 inches), width (29 inches), and height (34 inches).
| Specification | Value |
|---|---|
| Brand | Televes |
| Model Number | 149884 |
| Antenna Type | Long Range Hi-VHF UHF Mix |
| Maximum Range | Up to 80 Miles |
| Frequency Bands | RF channels 7-36 (Hi-VHF and UHF) |
| Integrated Amplifier | TForce Preamplifier with Automatic Gain Control |
| Filtering | FM and LTE/5G (above 608 MHz) |
| Product Dimensions (Assembled) | Approx. 84"L x 29"W x 34"H (based on image 61v2cfU-agL) |
| Item Weight | 11 pounds |
| Power Supply | UL-listed, 2 outputs |
Warranty and Support
Warranty Information
Televes products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your DATBOSS LR Mix antenna, please refer to the warranty card included with your product or visit the official Televes website. Keep your proof of purchase for warranty claims.
Customer Support
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your product, please contact Televes customer support. You can find contact information on the official Televes website or through the retailer where you purchased the antenna.
Televes Official Website: www.televes.com
