Hyperice Hypervolt 2 Percussion Massager User Manual

Introduction

The Hyperice Hypervolt 2 is a portable, battery-powered percussion massager designed to help relieve muscle soreness, improve mobility, and accelerate recovery. Its ergonomic and lightweight design makes it comfortable to use for whole-body application. Featuring QuietGlide technology, the device operates with minimal noise, allowing for a more relaxing experience.

Integrated with HyperSmart technology, the Hypervolt 2 connects to the Hyperice App via Bluetooth, providing guided warm-up and recovery plans. The device includes a patented pressure sensor with three levels, offering real-time feedback on the applied pressure. It is designed for ease of use and travel, being TSA approved for carry-on luggage.

Image: The Hyperice Hypervolt 2 percussion massager, showcasing its sleek grey design.

What's Included

Your Hypervolt 2 package includes the following components:

• Hypervolt 2 Device: The main percussion massager unit.
• Power Supply + Adapters: For charging the device in various regions.
• Head Attachments (5): A selection of five interchangeable massage heads to target different muscle groups and provide varied massage experiences.
• Head Attachment Pouch: A convenient pouch to keep all attachments organized and secure.

Image: All components included with the Hyperice Hypervolt 2, neatly arranged.

Setup

Charging the Device

1. Connect the power supply to the charging port on the base of the Hypervolt 2.
2. Plug the power supply into a wall outlet.
3. The LED indicator lights on the device will illuminate to show charging status. A full charge typically takes approximately 3 hours.
4. Once fully charged, disconnect the power supply. The device has a battery life of approximately 3 hours per charge.

Attaching the Head

1. Ensure the Hypervolt 2 is powered off before attaching or removing any head attachments.
2. Select the desired massage head.
3. Insert the stem of the attachment firmly into the opening on the front of the device.
4. To remove, gently pull the attachment straight out.

Operating Instructions

Powering On/Off

1. To power on, press and hold the power button on the back of the device for approximately 2 seconds.
2. To power off, press and hold the power button again for approximately 2 seconds.

Adjusting Speed and Pressure

• The Hypervolt 2 offers 3 speed settings. Press the power button briefly to cycle through the speeds. The LED indicators will show the current speed level.
• The patented pressure sensor provides feedback on the amount of pressure being applied. The LED ring at the base of the handle changes color to indicate pressure levels (typically green for light, orange for medium, red for high). Adjust pressure as needed for comfort and effectiveness.

Using the Hyperice App

• Download the Hyperice App from your device's app store.
• Enable Bluetooth on your mobile device and open the Hyperice App.
• Follow the in-app instructions to pair your Hypervolt 2.
• The app provides guided routines and real-time feedback to optimize your warm-up and recovery sessions.

Application Guidelines

• Apply the massager directly to the skin or over light clothing.
• Move the device slowly across the muscle group, applying gentle to moderate pressure.
• Avoid direct contact with bones, joints, and sensitive areas.
• Use for approximately 30-60 seconds per muscle group.
• Consult a healthcare professional if you have any pre-existing medical conditions or concerns.

Image: A user demonstrating the application of the Hypervolt 2 on their arm.

Image: The Hypervolt 2 being used on a person's leg to target thigh muscles.

Maintenance

Cleaning

• Ensure the device is powered off and unplugged before cleaning.
• Wipe the device with a clean, damp cloth. Do not use abrasive cleaners or immerse the device in water.
• Clean the massage heads with a mild soap and water solution, then rinse thoroughly and allow to air dry completely before reattaching.

Storage

• Store the Hypervolt 2 in a cool, dry place away from direct sunlight and extreme temperatures.
• Keep the device and its attachments in the provided pouch or a protective case when not in use.

Troubleshooting

If you encounter issues with your Hypervolt 2, please refer to the following common solutions:

If the problem persists after attempting these solutions, please contact Hyperice customer support for further assistance.

Specifications

Image: Detailed view of the Hypervolt 2 control panel and a summary of its specifications.

Warranty and Support

Warranty Information

For detailed warranty information regarding your Hyperice Hypervolt 2, please refer to the official Hyperice website or the warranty card included with your product. Warranty terms and conditions may vary by region.

Customer Support

If you require assistance, have questions about your device, or need to report an issue, please contact Hyperice customer support:

• Manufacturer: Hyperice
• Importer (India): Brightex Synergizer India Private Limited
• Importer Email: bsi@brightex.net
• Importer Phone: 18002668571

Please have your product model and purchase details ready when contacting support.