1. Important Safety Information
Please read all instructions carefully before using this appliance. Keep this manual for future reference.
- This appliance is intended for trimming nose and ear hair only. Do not use it for any other purpose.
- Keep the appliance out of reach of children.
- Do not immerse the main body of the trimmer in water. The cutting head is washable, but the battery compartment must remain dry.
- Do not use the trimmer if the cutting head is damaged, as this may cause injury.
- Remove the battery if the appliance will not be used for an extended period to prevent leakage.
- Dispose of batteries responsibly according to local regulations.
2. Product Overview and Package Contents
The Valera Trimmy 624.02 is an ergonomic, slim, and ultra-light trimmer designed for comfortable use. Its rounded profiled teeth ensure safe trimming without the risk of injury.
Package Contents:
- 1 x Valera Trimmy 624.02 Nose and Ear Hair Trimmer
- (AAA battery not included)
Image: Valera Trimmy 624.02 Nose and Ear Hair Trimmer. This image shows the complete trimmer unit.
3. Setup: Battery Installation
- Twist the bottom part of the trimmer counter-clockwise to open the battery compartment.
- Insert one 1.5V DC AAA battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
- Twist the bottom part clockwise to securely close the battery compartment.
Note: The battery is not included with the product.
4. Operating Instructions
Using the Trimmer:
- Ensure the trimmer is clean and dry before use.
- Turn on the trimmer by sliding the power switch (if present, otherwise assume twist-on mechanism).
- For Nose Hair: Gently insert the trimmer head into your nostril. Move the trimmer in a circular motion to trim unwanted hair. Do not insert the trimmer too deeply into the nostril.
- For Ear Hair: Carefully guide the trimmer head around the outer ear and into the ear canal opening to trim visible hair. Do not insert the trimmer too deeply into the ear canal.
- After use, turn off the trimmer.
Image: The Valera Trimmy 624.02 being used to trim nose hair. The image also highlights the easy washable head feature.
5. Maintenance and Cleaning
Regular cleaning ensures optimal performance and hygiene of your trimmer.
- Ensure the trimmer is switched off before cleaning.
- Twist and remove the cutting head from the main body of the trimmer.
- Rinse the cutting head under running tap water to remove hair clippings.
- Shake off excess water and allow the cutting head to air dry completely before reattaching it to the trimmer body.
- Wipe the main body of the trimmer with a damp cloth. Do not rinse the main body under water.
- Store the trimmer in a dry place.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Trimmer does not turn on. | Battery is dead or incorrectly inserted. | Replace the AAA battery or check its polarity. |
| Trimmer pulls hair instead of cutting. | Cutting head is clogged with hair or dull. | Clean the cutting head thoroughly. If the problem persists, the blade might be worn. |
| Reduced trimming performance. | Low battery power or dirty cutting head. | Replace the battery. Clean the cutting head. |
7. Specifications
- Model: Valera Trimmy 624.02
- Power Source: 1 x 1.5V DC AAA Battery (not included)
- Blade Material: Stainless Steel
- Product Dimensions (L x W x H): 12 x 2.15 x 2.15 cm
- Item Weight: 30 grams
- Color: Black
- Recommended Use: Trimming nose and ear hair
8. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Valera customer service. Keep your proof of purchase for warranty claims.
Manufacturer: Valera
Brand: Valera