1. Important Safety Instructions
Please read all instructions carefully before using this heater and retain for future reference. Failure to follow these instructions may result in fire, electric shock, injury, or property damage.
- This heater is designed for indoor use only. Do not use outdoors.
- Always plug the heater directly into a wall outlet. Never use with an extension cord or relocatable power tap.
- Do not operate any heater with a damaged cord or plug, or after the heater malfunctions, has been dropped, or damaged in any manner.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater and away from the sides and rear.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- DO NOT COVER the heater. Covering the heater can lead to overheating and fire.
- Exercise extreme caution when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- This heater includes a Tip-Over Switch that automatically shuts off the unit if it is accidentally tipped over.
- An Overheat Sensor is integrated to prevent overheating. If the heater reaches an unsafe temperature, it will automatically turn off.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- Always unplug the heater when not in use.
2. Product Overview
The HOMCOM 1500W Ceramic Oscillating Space Heater is a versatile heating solution designed for indoor use. It features PTC ceramic heating technology for quick warmth, multiple heating modes, and convenient controls.
Key Features:
- Powerful Heating: 1500W ceramic heating element.
- 2-in-1 Functionality: Provides both heating and fan-only operation.
- Oscillation: 36-degree oscillation for wide heat distribution.
- Adjustable Thermostat: Temperature range from 50°F to 95°F.
- Multiple Modes: High Heat (1500W), Low Heat (750W), and Fan-only.
- Timer Function: Programmable timer up to 8 hours.
- Remote Control: Convenient operation from a distance.
- Safety Features: Built-in Tip-Over Switch and Overheat Sensor.
Components:
- Heater Unit
- Remote Control
- Power Cord

Figure 1: HOMCOM Ceramic Space Heater and Remote Control
3. Setup
- Unpack the Heater: Carefully remove the heater and all accessories from the packaging. Retain packaging for storage if desired.
- Placement: Place the heater on a firm, level surface. Ensure there are no obstructions within 3 feet (0.9 meters) of the front, sides, and rear of the heater to allow for proper airflow and prevent fire hazards. This heater is suitable for rooms covering 215-270 square feet.
- Power Connection: Plug the power cord into a grounded 120V AC, 60Hz electrical outlet. Ensure the outlet is not overloaded with other appliances.

Figure 2: Heater Placement in an Indoor Environment
4. Operating Instructions
The heater can be operated using the control panel on the top of the unit or the included remote control.
Control Panel / Remote Control Buttons:
- Power Button (On/Off): Turns the heater on or off.
- Mode Button: Cycles through heating modes (High, Low, Fan).
- Temperature Up/Down Buttons: Adjusts the desired temperature.
- Oscillation Button: Activates or deactivates the 36-degree oscillation function.
- Timer Button: Sets the automatic shut-off timer.
Step-by-Step Operation:
- Power On: Press the Power button (⑂) on the control panel or remote control. The digital display will illuminate.
- Select Mode: Press the Mode button to cycle through the available settings:
- High Heat (1500W): Provides maximum heating output.
- Low Heat (750W): Provides reduced heating output for energy saving.
- Fan Only: Circulates air without heat.

Figure 3: Three Heating Modes
- Set Temperature: Use the Temperature Up (▲) or Down (▼) buttons to set your desired room temperature between 50°F and 95°F. The heater will automatically maintain this temperature.
- Activate Oscillation: Press the Oscillation button (↻) to start the 36-degree oscillation, which helps distribute heat evenly across the room. Press again to stop oscillation.
- Set Timer: Press the Timer button (⏱) to set the automatic shut-off timer. Each press will increase the timer by one hour, up to a maximum of 8 hours. The heater will turn off automatically after the set time.
- Power Off: Press the Power button (⑂) again to turn off the heater. The fan may continue to run for a short period to cool down the heating element before shutting off completely.

Figure 4: Remote Control and Timer Function

Figure 5: 36-Degree Oscillation
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning: Always unplug the heater from the power outlet and allow it to cool completely before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Air Intake/Outlet: Periodically check the air intake and outlet grilles for dust and lint accumulation. Use a vacuum cleaner with a brush attachment to gently remove any debris. Keeping these areas clear is crucial for efficient operation and to prevent overheating.
- Storage: When not in use, store the heater in its original packaging or a dust-free, dry location. Avoid placing heavy objects on top of the heater during storage.
6. Troubleshooting
If your heater is not operating correctly, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. |
|
|
| Heater is on but no heat is produced. |
|
|
| Heater makes unusual noises or smells. |
|
|
7. Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 7 x 7 x 17.25 inches |
| Model Number (ASIN) | B09J86ZT2G |
| Power Source | Corded Electric |
| Heating Method | Convection, Forced Air (PTC Ceramic) |
| Power Output | 1500W (High), 750W (Low) |
| Coverage Area | 215-270 sq ft |
| Temperature Range | 50-95°F |
| Oscillation | 36 degrees |
| Timer | Up to 8 hours |
8. Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or visit the official HOMCOM website. You may also contact HOMCOM customer service directly for assistance with product issues or inquiries.