1. Introduction
This manual provides essential information for the safe and effective use of your BSOD AC 85-265V 7W LED Magic Bulb. Please read these instructions carefully before installation and operation, and retain them for future reference.
2. Product Overview
2.1 Key Features
- Dual Functionality: Operates as a standard E26/E27 LED bulb and an emergency light with a built-in rechargeable battery.
- Remote Control: Includes an infrared (IR) remote for convenient operation, including on/off and dimming.
- Brightness Levels: Features 3 dimmable brightness settings (100%, 50%, 10%).
- Emergency Power: Automatically activates during power outages, providing light for 4-12 hours depending on brightness setting.
- Integrated Charging: Recharges directly through any standard E26/E27 lamp socket, eliminating the need for separate charging cables.
- Portable Design: Equipped with a loop cap for easy hanging, suitable for camping or as a flashlight.
- Energy Efficient: 7W LED equivalent to a 60W incandescent bulb.
2.2 Package Contents
- BSOD AC 85-265V 7W LED Magic Bulb (2 units)
- Remote Controller (2 units)
- Loop Cap (2 units)
Image: Two BSOD LED Magic Bulbs and their remote control.
3. Setup
3.1 Initial Preparation
- Before first use, locate the small switch on the bulb body. Press this switch to turn off the sleep mode and activate the infrared receiver for the remote control.
- Ensure the remote control's CR2032 silver-zinc battery has power.
- Fully charge the bulb by screwing it into a standard E26/E27 lamp socket and turning on the power. A full charge takes approximately 5 hours.
3.2 Installation
- Ensure the power to the lamp fixture is turned off before installation.
- Carefully screw the BSOD LED Magic Bulb into a standard E26/E27 lamp socket.
- Turn on the power to the lamp fixture. The bulb will begin charging if not already full.
Image: Diagram illustrating the bulb components and remote control layout.
4. Operation
4.1 Normal Lighting Mode
When screwed into a powered E26/E27 socket, the bulb functions as a regular LED light. It will also charge its internal battery simultaneously.
4.2 Remote Control Functions
Use the provided remote control to manage the bulb's functions:
- ON/OFF: Press the 'ON' button to turn the light on, and 'OFF' to turn it off.
- Brightness Adjustment: Use the 'Up' and 'Down' arrow buttons to cycle through the three brightness levels (100%, 50%, 10%).
- Emergency Light (EL): Press the 'EL' button to activate the emergency light function directly, even when not in a socket.
Image: A hand using the remote control to operate a hanging BSOD LED Magic Bulb.
4.3 Cordless Function (Manual Switch)
For mobile lighting or when not in a socket, the bulb can be operated via the small switch on its body:
- Press the switch once to start the cordless function (100% brightness).
- Touch the switch again to dim to Level 2 (50% brightness).
- Touch the switch a third time to dim to Level 3 (10% brightness).
- Touch the switch a fourth time to turn the light off.
Image: Detailed view of the bulb's manual switch and the internal LED charging indicator.
5. Charging the Bulb
The BSOD LED Magic Bulb features an integrated rechargeable battery that charges when the bulb is powered in a standard E26/E27 socket.
- Charging Time: A full charge from empty takes approximately 5-6 hours.
- Charging Indicator: An internal LED indicator shows the charging status:
- Red: The bulb is currently recharging.
- Blue: The bulb is fully charged.
- Discharge Time (Cordless Mode):
- 100% Brightness: 4-5 hours
- 50% Brightness: 8-10 hours
- 10% Brightness: 10-12 hours
Image: Visual guide to the charging indicator (red for charging, blue for full) and estimated discharge times at various brightness levels.
6. Emergency Lighting Mode
The BSOD LED Magic Bulb is designed to provide light during power outages.
- When a power failure occurs, the bulb will automatically switch to its internal battery power and illuminate.
- You can also manually activate the emergency light function using the 'EL' button on the remote control or by pressing the switch on the bulb body when it's not in a powered socket.
- The included loop cap allows you to hang the bulb for portable emergency lighting.
Image: A family using the BSOD LED Magic Bulb for illumination during a power outage.
Image: Illustration of a city experiencing a power outage, with one light source from the BSOD Magic Bulb.
7. Maintenance
- Cleaning: Ensure the bulb is off and cool before cleaning. Wipe with a soft, dry cloth. Do not use liquid cleaners.
- Battery Care: To maintain battery life, avoid fully discharging the bulb frequently. Recharge it regularly.
- Storage: If storing the bulb for an extended period, ensure it is fully charged and store in a cool, dry place. Recharge every few months to prevent deep discharge.
- Remote Battery: The remote uses a CR2032 silver-zinc battery. Replace it when the remote becomes unresponsive.
8. Troubleshooting
- Bulb not turning on/charging:
- Ensure the small switch on the bulb body has been pressed to activate the remote receiver and take it out of sleep mode.
- Verify the E26/E27 socket is powered and functioning correctly.
- Check if the bulb is securely screwed into the socket.
- Remote control is unresponsive:
- Ensure the bulb's IR receiver is active (small switch pressed).
- Check the remote control's CR2032 battery and replace if necessary.
- Ensure there are no obstructions between the remote and the bulb.
- Short battery life in cordless mode:
- Ensure the bulb is fully charged (blue indicator). A full charge takes 5-6 hours.
- Higher brightness settings consume battery faster. For longer operation, use the 10% or 50% brightness levels.
- Bulb size compatibility:
- Note that the BSOD LED Magic Bulb is larger than standard A60 bulbs (closer to A70 size). Ensure your fixture has adequate space.
9. Technical Specifications
| Specification | Value |
|---|---|
| Brand | BSOD |
| Model Name | Rechargeable Light Bulbs |
| Light Type | LED |
| Wattage | 7 watts |
| Incandescent Equivalent Wattage | 40 Watts |
| Bulb Base | E26 |
| Bulb Shape Size | A23 |
| Light Color | Cool White |
| Color Temperature | 6000 Kelvin |
| Brightness | 500 Lumens |
| Voltage | 110 Volts (Accepted: 100 to 240 Volts) |
| Power Source | Battery Powered |
| Control Method | Remote |
| Average Life | 50000 Hours |
| Material | Aluminum, Plastic |
| Product Dimensions | 2.75"W x 4.8"H |
| Item Weight | 11.1 ounces (0.69 Pounds) |
| Battery Cell Type | Lithium-Phosphate |
| Certifications | CE, FCC, RoHS |
Image: The BSOD LED Magic Bulb with its dimensions (2.75 inches width, 4.8 inches height) and loop cap shown.
10. Warranty and Support
The BSOD LED Magic Bulb comes with a One-Year Warranty Service. If you have any questions or encounter issues after receiving the goods, please contact the seller for assistance. They will address your concerns.
For remote control replacement, the ASIN is B0BRL46JGH.
11. Safety Information
- Only use the built-in dedicated battery. Do not attempt to replace it with an inappropriate battery, as this may damage the LED light.
- Before connecting the bulb with mains power, ensure the lamp switch is off.
- Do not touch the bulb body immediately after connecting with power to avoid electric shock.
- This product is primarily for indoor use. If used outdoors, ensure adequate waterproof protection.
