1. Introduction
This manual provides instructions for the Taylor Digital Kitchen Scale Model 5280827. This scale is designed for precise measurement of dry and liquid ingredients, featuring an antimicrobial surface, a large backlit display, and convenient functions like Tare and Hold.
Key Features:
- Precision Measurement: Measures dry ingredients up to 11 lb x 0.1 oz / 5000 g x 1 g and liquids up to 176 fl oz x 0.1 fl oz / 5000 mL x 1 mL.
- Antimicrobial Surface: Treated with an EPA registered antimicrobial additive that inhibits the growth of odor and stain-causing bacteria on the product surface. Note: This product does not protect users or others against food-borne bacteria. Always clean and wash before and after each use.
- Extra Large Digital Readout: Features a 1.1-inch white backlit digital screen for easy reading.
- Tare Function: Allows weighing multiple ingredients in one container by zeroing out the weight of the container or previous ingredients.
- Hold Function: Locks the last weight displayed on the screen for easy viewing after an oversized container is removed.
- Battery Included: Comes with three (3) AAA batteries.

2. Setup
2.1. Battery Installation
- Locate the battery compartment on the underside of the scale.
- Open the battery compartment cover.
- Insert three (3) AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.

3. Operating Instructions
3.1. Power On/Off
- To Power On: Press the central 'TARE' button. The display will illuminate and show '0: 0.0' or '0 g' when ready.
- To Power Off: Press and hold the central 'TARE' button for a few seconds until the display turns off. The scale will also automatically shut off after a period of inactivity to conserve battery life.
3.2. Changing Measurement Units
The scale can measure in pounds/ounces (lb oz), fluid ounces (fl.oz.), grams (g), and milliliters (mL).
- To Change Units: Rotate the central knob to select your desired unit of measurement. The selected unit will be highlighted on the display.
3.3. Tare Function (Zeroing the Scale)
The Tare function allows you to subtract the weight of a container or previous ingredients, so you only measure the new item being added.
- Place an empty container on the scale. The display will show its weight.
- Press the central 'TARE' button. The display will reset to '0'.
- Add the ingredient you wish to weigh into the container. The display will show only the weight of the new ingredient.
- Repeat the process for additional ingredients.

3.4. Hold Function
The Hold function is useful for weighing large or oversized items that might obscure the display. It locks the weight reading on the screen.
- Place the item on the scale.
- Press the 'HOLD' button. The weight displayed will be locked.
- You can now remove the item, and the last measured weight will remain on the display.
- Press 'HOLD' again to clear the display or to take a new measurement.
3.5. Informational Video: Why Use a Kitchen Scale?
4. Maintenance
4.1. Cleaning
- The scale features an antimicrobial surface. To clean, wipe the scale with a damp cloth and mild soap.
- Do not immerse the scale in water or use abrasive cleaners.
- Always ensure the scale is dry before storage or next use.
4.2. Storage
- Store the scale in a cool, dry place.
- Avoid placing heavy objects on the scale when not in use, as this may affect its accuracy over time.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scale does not turn on | Dead or incorrectly installed batteries. | Check battery polarity or replace with new AAA batteries. |
| Inaccurate readings | Scale on an uneven surface; debris under the scale; exceeding maximum capacity. | Place scale on a flat, stable surface. Clean any debris from under the scale. Ensure weight does not exceed 11 lbs (5000g). |
| Display shows 'Err' | Overload beyond maximum capacity. | Remove item immediately to prevent damage. Do not exceed 11 lbs (5000g). |
| Auto-off too quickly | Standard power-saving feature. | This is normal operation. Ensure you complete measurements within the active time or use the Hold function if needed. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Taylor |
| Model Number | 5280827 |
| Capacity | 11 Pounds (5000g) |
| Readout Accuracy | 0.1 oz, 1 g, 1 mL |
| Measurement Units | Pounds/Ounces, Fluid Ounces, Grams, Milliliters |
| Display Type | LED with Backlight (1.1 inch) |
| Special Feature | Antimicrobial Surface |
| Material | Plastic |
| Power Source | 3 x AAA Batteries (Included) |
| Item Weight | 0.55 Kilograms |

7. Warranty and Support
7.1. Warranty Information
This Taylor Digital Kitchen Scale comes with a ONE (1) YEAR LIMITED WARRANTY. This warranty excludes batteries. Please retain your proof of purchase for any warranty claims.
7.2. Customer Support
For further assistance, product information, or to explore other Taylor products, please visit the official Taylor store:





