Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Electrohome Kingston 7-in-1 Vintage Vinyl Record Player. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Image: The Electrohome Kingston 7-in-1 Vintage Vinyl Record Player in black, showcasing its classic design with the turntable exposed and the control panel visible.
Package Contents
Before proceeding with setup, ensure all items are present in the package:
- Electrohome Kingston 7-in-1 Vinyl Record Player
- 3-speed turntable
- Sapphire needle (pre-installed)
- 4 high-performance speakers (integrated)
- Vinyl Record Cleaning Kit (includes Carbon Fiber/Velvet Record Brush, Carbon Fiber Stylus Brush)
- 45 RPM adapter
- Remote Control (requires 2 AAA batteries, included)
- Power Cord (5ft)
- User Manual (this document)
- Quick Start Guide
Image: An illustration of all components included with the Electrohome Kingston system, laid out neatly.
Setup Instructions
- Unpacking: Carefully remove all components from the packaging. Retain packaging for future transport or storage.
- Placement: Place the unit on a stable, level surface away from direct sunlight, heat sources, and excessive dust or moisture. Ensure adequate ventilation around the unit.
- Power Connection: Connect the provided power cord to the AC IN port on the back of the unit, then plug the other end into a standard wall outlet.
- Remote Control Batteries: Open the battery compartment on the back of the remote control and insert the two included AAA batteries, observing correct polarity (+/-).
- Turntable Protection: Remove any protective shipping materials from the turntable platter and tonearm. Ensure the stylus guard is removed from the needle before playing records.
Operating Instructions
The Electrohome Kingston offers multiple audio playback options. Use the 'Source' button on the front panel or remote control to switch between modes.
Image: Visual representation of the various input sources available on the Electrohome Kingston system.
1. Turntable Operation (Vinyl)
- Select Source: Press the 'Source' button until 'PHONO' is displayed.
- Choose Speed: Select the appropriate speed (33, 45, or 78 RPM) using the speed selector switch located on the turntable deck. For 7-inch records with a large center hole, place the 45 RPM adapter on the spindle.
- Place Record: Carefully place your vinyl record on the turntable platter.
- Position Tonearm: Gently lift the tonearm using the cueing lever and move it over the desired starting groove of the record.
- Lower Tonearm: Slowly lower the tonearm onto the record using the cueing lever. Playback will begin.
- End Playback: At the end of the record, the tonearm will automatically return to its rest position. Alternatively, lift the tonearm manually using the cueing lever and return it to the rest.
Image: The turntable mechanism, illustrating the capability to play 33, 45, and 78 RPM vinyl records of various sizes.
2. Bluetooth Streaming
- Select Source: Press the 'Source' button until 'BT' (Bluetooth) is displayed. The unit will enter pairing mode, indicated by a flashing 'BT' on the display.
- Enable Bluetooth on Device: On your smartphone, tablet, or other Bluetooth-enabled device, enable Bluetooth and search for available devices.
- Pair Device: Select 'Electrohome Kingston' from the list of devices. Once paired, the 'BT' indicator will stop flashing and remain solid.
- Play Music: Begin playing audio from your device. The sound will be streamed through the Kingston system.
Image: A smartphone connected via Bluetooth to the Electrohome Kingston, demonstrating wireless music streaming.
3. CD Player Operation
- Select Source: Press the 'Source' button until 'CD' is displayed.
- Insert CD: Gently insert a CD into the CD slot on the front panel with the label side facing up. The CD will load automatically.
- Playback: The CD will begin playing automatically. Use the 'Play/Pause', 'Skip Forward', and 'Skip Back' buttons on the unit or remote to control playback.
4. AM/FM Radio
- Select Source: Press the 'Source' button until 'AM' or 'FM' is displayed.
- Tune Stations: Use the tuning knob on the front panel or the 'Tune +/-' buttons on the remote control to find desired radio stations.
- Antenna Adjustment: For optimal reception, adjust the position of the FM wire antenna on the back of the unit.
5. Aux In (Auxiliary Input)
- Select Source: Press the 'Source' button until 'AUX' is displayed.
- Connect Device: Connect an external audio device (e.g., smartphone, MP3 player) to the 'AUX IN' jack on the back of the unit using a 3.5mm audio cable (not included).
- Play Audio: Begin playing audio from your connected device.
Image: The rear panel connections, highlighting the Aux In port for external devices and RCA Out for optional external speakers.
6. USB Playback and MP3 Recording
- Insert USB Drive: Insert a USB flash drive into the USB port on the front panel.
- USB Playback:
- Press the 'Source' button until 'USB' is displayed.
- The unit will automatically detect and play compatible MP3 files from the USB drive.
- Use the 'Skip Forward' and 'Skip Back' buttons to navigate tracks.
- MP3 Recording (Vinyl or CD to USB):
- Ensure a USB drive is inserted.
- Select either 'PHONO' or 'CD' as the source.
- Begin playing the vinyl record or CD you wish to record.
- Press the 'RECORD' button on the front panel or remote. The recording indicator will illuminate.
- To stop recording, press the 'RECORD' button again. The recorded MP3 file will be saved to the USB drive.
Image: The USB port on the front panel, demonstrating the capability to record vinyl or CD audio directly to MP3 files on a USB drive.
7. RCA Out (Audio Output)
The 'AUDIO OUT' RCA ports on the back of the unit allow you to connect the Kingston to external powered speakers or a home audio receiver for enhanced sound. Connect the red and white RCA cables (not included) from the Kingston's 'AUDIO OUT' to the corresponding 'AUDIO IN' ports on your external audio system.
8. Headphone Out
Connect standard headphones (3.5mm jack) to the headphone port on the front panel for private listening. Connecting headphones will mute the internal speakers.
9. Remote Control Functions
The included remote control provides convenient access to various functions:
- Power: Turn the unit on/off.
- Source: Switch between input modes (Phono, BT, CD, AM, FM, AUX, USB).
- Volume +/-: Adjust the master volume.
- Play/Pause, Skip Tracks: Control playback for CD, USB, and Bluetooth.
- EQ: Adjust equalization settings.
- Record: Initiate/stop MP3 recording.
Image: The remote control for the Electrohome Kingston, detailing its various buttons and functions for comprehensive system control.
Maintenance
- Cleaning the Unit: Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Stylus Care: The sapphire needle is delicate. Use the included Carbon Fiber Stylus Brush to gently clean the stylus tip from back to front to remove dust and debris. Avoid touching the stylus with your fingers.
- Record Cleaning: Regularly clean your vinyl records using the included Carbon Fiber/Velvet Record Brush to remove dust and static, which can improve sound quality and extend stylus life.
- Dust Cover: Keep the dust cover closed when the unit is not in use to protect the turntable from dust.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; outlet not active. | Ensure power cord is securely plugged into the unit and a working wall outlet. |
| No sound | Volume too low; incorrect source selected; headphones connected. | Increase volume. Verify correct source is selected. Disconnect headphones if sound is desired from speakers. |
| Turntable not spinning | Unit not powered on; turntable belt dislodged; speed selector incorrect. | Ensure unit is powered on and 'PHONO' source is selected. Check turntable belt (refer to advanced maintenance if needed). Verify correct speed is selected. |
| Bluetooth pairing issues | Device too far; 'BT' source not selected; device already paired to another unit. | Ensure device is within range. Select 'BT' source. Disconnect from other Bluetooth devices. Try restarting both the Kingston and your device. |
| Poor radio reception | Antenna not extended/positioned correctly. | Adjust the FM wire antenna for better signal. |
Specifications
- Model: RR75BVB52
- Product Dimensions (L x W x H): 13.5 x 17.3 x 12.25 inches
- Item Weight: 23.8 pounds
- Power Source: AC Motor
- Turntable Speeds: 33 1/3, 45, 78 RPM
- Needle Type: Sapphire
- Included Components: 3-speed turntable, sapphire needle, 4 high performance speakers, Vinyl Record Cleaning Kit, 2-in-1 Anti-Static Record & Stylus Brush, AM/FM radio, CD player, Bluetooth, 45 Record Adaptor, 5ft Power Cord, Remote Control, 2 AAA Batteries, User Manual, Quick Start Guide
- Material: Engineered Wood
- Color: Black
- Compatible Devices: Headphones, Smartphones, Tablets
Warranty and Support
The Electrohome Kingston 7-in-1 Vintage Vinyl Record Player comes with a 1-Year Manufacturer's Warranty. Electrohome also provides Lifetime Customer Support for this product.
For warranty claims, technical assistance, or further inquiries, please refer to the contact information provided in your Quick Start Guide or visit the official Electrohome support website.
For more information about Electrohome products, you can visit the official brand store: Electrohome Store on Amazon.
