Wood Trick Ocean Yacht 3D Wooden Puzzle Instruction Manual

1. Introduction

Thank you for choosing the Wood Trick Ocean Yacht 3D Wooden Puzzle. This expert-level model kit allows you to construct a detailed replica of the renowned Calypso research vessel. Comprising 565 precisely cut wooden pieces, this model features intricate mechanical elements and requires no glue for assembly. The finished model measures approximately 18.82 x 7.64 x 4.13 inches.

This manual provides step-by-step instructions for assembly, operation, and maintenance to ensure a rewarding building experience and lasting enjoyment of your model.

2. Safety Information

• Small Parts Warning: This kit contains small parts and is not suitable for children under 3 years due to choking hazards. Recommended age for assembly is 18 years and up.
• Sharp Edges: Some wooden pieces may have sharp edges. Handle with care during assembly.
• Material: The model is made from natural wood. Avoid exposure to excessive moisture or direct sunlight to prevent warping or damage.
• Tools: No special tools are required for assembly, but a small file or sandpaper may be useful for smoothing edges if desired.

3. Package Contents

Before beginning assembly, please verify that all components are present:

• Pre-cut wooden puzzle pieces (565 pieces)
• Illustrated step-by-step instruction manual
• Rubber bands (for mechanical functions)
• Additional small components (e.g., toothpicks for connections)

If any parts are missing or damaged, please contact Wood Trick customer support.

4. Setup and Assembly

Assembly of the Wood Trick Ocean Yacht typically takes 6-8 hours for experienced hobbyists. Follow the included illustrated manual carefully. No glue is required for assembly; pieces are designed to interlock securely.

1. Preparation:
   • Unpack all components and lay them out on a clean, flat surface.
   • Familiarize yourself with the instruction manual and the numbering of the pieces.
   • Gently remove pieces from their wooden sheets. Use a small craft knife or sandpaper if needed to clean any remaining tabs.
2. Step-by-Step Assembly:

   Follow the detailed illustrations in the provided manual. Each step shows which pieces to connect and in what order. Pay close attention to the orientation of pieces.

   

   Image: A person holding the partially assembled wooden yacht model, demonstrating the scale and detail.

   • Interlocking Pieces: Pieces are designed for a snug fit. Do not force pieces together; if a piece doesn't fit, re-check the manual for correct orientation or ensure no excess wood remains from the cutting process.
   • Mechanical Components: When assembling gears, axles, and other moving parts, ensure they move freely before proceeding to the next step. Lubrication (e.g., with wax, not included) may be applied to moving parts for smoother operation.
   • Rubber Band Installation: Install rubber bands as indicated in the manual for the propulsion system and other moving features. Ensure they are not twisted or overly stretched during installation.
3. Final Checks:
   • Once assembly is complete, review the entire model to ensure all pieces are securely in place.
   • Test all movable parts, such as the crane, helicopter, and propulsion system, to confirm proper function.

5. Operating Instructions

The Wood Trick Ocean Yacht features several interactive elements:

• Rubber Band Motor Propulsion:

  The yacht is equipped with a rubber band motor that allows it to travel up to 8 feet (3 meters) on a level surface. To activate:

  1. Locate the winding mechanism on the deck (refer to manual for exact location).
  2. Turn the mechanism to wind the rubber band motor. Do not over-wind.
  3. Place the yacht on a smooth, flat surface and release the mechanism to observe movement.
  

  Image: A hand winding the rubber band motor mechanism on the deck of the Ocean Yacht model.

• Crane Operation:

  The model includes a functional crane for lowering and raising the mini-submarines or other cargo.

  1. Manually position the crane arm.
  2. Use the integrated winch to raise or lower the attached basket or submarine.
  

  Image: The wooden yacht model featuring a detailed crane lowering a small submarine.

• Helicopter:

  The model includes a detailed helicopter that can be placed on the helipad. The rotor blades can be manually spun.

  

  Image: A close-up view of the wooden helicopter model positioned on the yacht's helipad.

6. Maintenance

• Cleaning: Dust the model regularly with a soft, dry cloth. Avoid using water or chemical cleaners, as these can damage the wood.
• Storage: Store the model in a dry environment, away from direct sunlight and extreme temperature fluctuations, to prevent warping or fading.
• Moving Parts: If mechanical parts become stiff, a small amount of wax (e.g., beeswax or candle wax) can be applied to the contact points to improve smoothness.
• Loose Connections: Periodically check for any loose connections. Gently press pieces back into place if they become dislodged.

7. Troubleshooting

8. Specifications

• Model Name: Wood Trick Ocean Yacht
• Number of Pieces: 565
• Assembled Dimensions: 18.82 x 7.64 x 4.13 inches (47.8 x 19.4 x 10.5 cm)
• Item Weight: 3.43 pounds (1.56 kg)
• Material: Natural Wood
• Assembly Time: Approximately 6-8 hours
• Recommended Age: 18 years and up
• Features: Rubber band motor, functional crane, detailed helicopter, mini-submarines, underwater observation tools.

9. Official Product Video

10. Warranty and Support

Wood Trick is committed to providing high-quality products. If you encounter any issues with your Wood Trick Ocean Yacht 3D Wooden Puzzle, including missing or damaged parts, or require assistance with assembly or operation, please contact our customer support team.

For support, please visit the official Wood Trick website or refer to the contact information provided with your product packaging. Please have your model name and purchase details ready when contacting support.