Kassionel Replacement Remote Control User Manual for Yamaha AV Receivers (Models: RAV1105, RAV172, RAV214, V6941100, HTR-5460, RX-V620, RX-V620RDS, DSP-AX620)

Introduction

This manual provides instructions for the Kassionel replacement remote control, designed for use with various Yamaha AV receivers. This remote is a functional replacement and is not an original Yamaha product. It offers direct compatibility without the need for complex programming.

Setup

1. Battery Installation

The remote control requires two (2) 1.5V AAA alkaline batteries (not included). Follow these steps to install them:

Locate the battery compartment on the back of the remote control.
Slide the battery compartment cover downwards to open it.
Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
Close the battery compartment cover by sliding it back into place until it clicks.

Battery compartment of the remote control with two AAA batteries being inserted.

Image: The remote control's battery compartment is shown open, indicating where two AAA batteries should be placed. Text on the image states 'Need 2x AA batteries (not included)', though the product specifications indicate AAA batteries are required. Please use AAA batteries as per product specifications.

2. Initial Use

This replacement remote control is designed to work immediately with compatible Yamaha AV receivers without any programming. Simply install the batteries, and it is ready for use.

Hand holding the remote control with a graphic indicating wireless signal and text 'No programming needed, work right out of the box'.

Image: A hand holds the remote control, with a graphic suggesting wireless communication. The accompanying text highlights that no programming is required for immediate functionality.

Operating Instructions

The remote control provides access to essential functions of your Yamaha AV receiver. Ensure a clear line of sight between the remote and your receiver for optimal performance.

Front view of the Kassionel replacement remote control, showing all buttons and their labels.

Image: A detailed front view of the remote control, displaying all buttons including power, input selectors (DVD, DTV/CBL, VCR, CD, MD/CD/R, V-AUX, MULTI CH IN, TUNER), volume controls, mute, menu navigation, and various sound mode selections.

Key Functions:

POWER: Turns the receiver on or off.
Input Selectors (DVD, DTV/CBL, VCR, CD, MD/CD/R, V-AUX, MULTI CH IN, TUNER): Selects the desired audio/video input source.
VOLUME (+/-): Adjusts the master volume level.
MUTE: Silences the audio output.
MENU SET / RETURN MEMORY: Navigates receiver menus and settings.
STEREO / MUSIC / STANDARD / SELECT / STRAIGHT / 5CH / NIGHT: Selects various sound field programs and audio modes.
TEST: Initiates speaker test tone.
PROG (+/-): Used for tuner preset navigation or other programmable functions.
LEVEL: Adjusts individual channel levels.
SPEAKERS A/B: Toggles between speaker outputs A and B.
ENTER / Arrow Keys: Used for menu navigation and selection.
STANDBY: Puts the receiver into standby mode.

Maintenance

Battery Replacement

Replace batteries when the remote's response becomes sluggish or stops functioning. Always replace both batteries simultaneously with new AAA alkaline batteries. Do not mix old and new batteries or different types of batteries.

Cleaning

To clean the remote control, gently wipe its surface with a soft, dry cloth. Avoid using liquid cleaners, solvents, or abrasive materials, as these can damage the remote's finish or internal components.

Troubleshooting

Remote not responding:
- Ensure batteries are correctly installed with proper polarity.
- Replace old batteries with new ones.
- Check for any obstructions between the remote and the receiver's infrared sensor.
- Ensure you are within the effective range of the receiver.
Battery drain issue: Some users have reported rapid battery depletion (e.g., within 3 days). If this occurs, ensure batteries are inserted with correct polarity. If the issue persists, contact customer support.
Mislabeled battery polarity: In some units, the positive (+) and negative (-) markings inside the battery compartment may be incorrect. If the remote does not work with batteries inserted as labeled, try reversing the battery orientation.
Not all features work: While basic functions like power, volume, and input selection are generally compatible, some advanced or specific functions of your original Yamaha remote may not be replicated on this replacement unit.

Specifications

Model: RAV254
Compatible Devices: Yamaha AV Receivers (RAV1105, RAV172, RAV214, V6941100, HTR-5460, RX-V620, RX-V620RDS, DSP-AX620)
Power Supply: 2 x 1.5V AAA Alkaline Batteries (not included)
Product Dimensions: 6.26 x 2.05 x 0.79 inches (15.9 x 5.2 x 2.0 cm)
Item Weight: 2.12 ounces (60 grams)
Material: ABS (as indicated by product features)
Special Feature: No Programming Required

Image showing features of the remote: Durable, Strong Signal, Soft Button, ABS Material.

Image: Visual representation of the remote's key attributes, including durability, strong signal transmission, soft-touch buttons, and construction from ABS material.

Warranty and Support

For any questions, concerns, or issues regarding your Kassionel replacement remote control, please contact the seller directly. Refer to your purchase documentation for specific contact information.

Kassionel RAV254