1. Product Overview
The TRQ ADA02022 Park Assist Camera Kit is designed as an upgrade for specific Chevrolet Silverado and GMC Sierra truck models. This kit provides enhanced rear visibility, aiding in parking and maneuvering. It includes a rear view camera integrated into a new tailgate handle bezel, offering a direct-fit, OE replacement solution.
This product is intended for professional installation due to the modifications required for vehicle integration. A separate monitor with an RCA video input is necessary for operation.
2. Kit Contents
The TRQ ADA02022 kit includes the following components:
- 1x Rear View Camera
- 1x Tailgate Handle Bezel
- 1x Universal Harness (8-meter video cable with RCA connector, 3-meter fused power cable)
Figure 2.1: Included components of the TRQ ADA02022 Park Assist Camera Kit.
3. Specifications
| Feature | Specification |
|---|---|
| Color | Black |
| Finish | Textured |
| Video Signal | NTSC |
| Resolution | 640x480 (480p) |
| Lens Angle (Actual Viewing Angle) | 167 Degrees |
| Waterproof Rating | IP67 |
| Video Cable Length | 8 meters (26-1/4 feet) |
| Power Cable Length | 3 meters (9-3/4 feet) |
| Connector Type | RCA |
| Optical Sensor Size | 1/3 inch |
| Installation Type | Surface Mount |
| Product Dimensions | 27.94 x 35.56 x 10.16 cm |
| Item Weight | 975 g |
4. Compatibility
This park assist camera kit is compatible with the following vehicle models:
- 2008-2013 Chevrolet Silverado 1500 (Rear Upgrade)
- 2007 Chevrolet Silverado 1500 (with New Body Style, Rear Upgrade)
- 2008-2014 Chevrolet Silverado 2500 HD (Rear Upgrade)
- 2007 Chevrolet Silverado 2500 HD (with New Body Style, Rear Upgrade)
- 2008-2014 Chevrolet Silverado 3500 HD (Rear Upgrade)
- 2007 Chevrolet Silverado 3500 HD (with New Body Style, Rear Upgrade)
- 2008-2013 GMC Sierra 1500 (Rear Upgrade)
- 2007 GMC Sierra 1500 (with New Body Style, Rear Upgrade)
- 2008-2014 GMC Sierra 2500 HD (Rear Upgrade)
- 2007 GMC Sierra 2500 HD (with New Body Style, Rear Upgrade)
- 2008-2014 GMC Sierra 3500 HD (Rear Upgrade)
- 2007 GMC Sierra 3500 HD (with New Body Style, Rear Upgrade)
Figure 4.1: Always verify product fitment for your specific vehicle model and year.
5. Setup and Installation
Important: Professional installation is highly recommended for this product.
This kit is designed as an upgrade from the factory system and requires modifications to your vehicle. Instructions for vehicle-specific modifications are not included with this manual. It will not work with factory wiring and requires a separate monitor/display with an RCA video input.
5.1 Pre-Installation Checks
- Ensure all kit components are present and undamaged.
- Verify vehicle compatibility using the information in Section 4.
- Confirm you have a compatible monitor with an RCA video input.
- Gather necessary tools for vehicle panel removal and wiring.
5.2 General Installation Steps (Consult a professional for detailed vehicle-specific instructions)
- Disconnect Vehicle Battery: For safety, disconnect the negative terminal of your vehicle's battery before starting any electrical work.
- Remove Existing Tailgate Handle: Carefully remove the original tailgate handle bezel from your vehicle.
- Install New Tailgate Handle Bezel with Camera: Mount the new tailgate handle bezel, which integrates the rear view camera, into the vehicle.
- Route Wiring: Carefully route the 8-meter video cable and 3-meter fused power cable from the camera location to the desired monitor location and a suitable power source. Ensure cables are secured and away from moving parts or heat sources.
- Connect Power: Connect the fused power cable to a suitable 12V power source (e.g., reverse light circuit for automatic activation, or an accessory circuit for constant power).
- Connect Video: Connect the RCA video connector from the camera harness to the RCA video input on your monitor.
- Reconnect Battery: Once all connections are secure, reconnect the vehicle battery.
- Test System: Turn on your vehicle and test the camera system to ensure it functions correctly. Adjust camera angle if necessary.
Figure 5.1: Rear view camera and wiring harness.
Figure 5.2: Tailgate handle bezel with integrated camera housing.
6. Operating Instructions
Once properly installed and connected to a compatible monitor, the TRQ Park Assist Camera will activate when the vehicle is placed in reverse gear (if wired to the reverse light circuit) or when manually switched on (if wired to an accessory circuit with a switch).
- Automatic Activation: When the vehicle is shifted into reverse, the camera feed will automatically display on your connected monitor.
- Manual Activation: If wired to an accessory circuit, activate the camera via the installed switch.
- Viewing Area: The camera provides a wide 167-degree viewing angle, offering a comprehensive view of the area behind your vehicle.
- Parking Assistance: Use the displayed video feed to safely maneuver your vehicle while parking or backing up.
Caution: Always check your surroundings visually in addition to using the camera system. The camera is an aid and does not replace safe driving practices.
7. Maintenance
To ensure optimal performance and longevity of your TRQ Park Assist Camera, follow these maintenance guidelines:
- Clean Lens Regularly: Periodically clean the camera lens with a soft, damp cloth to remove dirt, dust, and debris that may obstruct the view. Avoid abrasive cleaners.
- Inspect Wiring: Occasionally check the wiring and connections for any signs of wear, damage, or loose connections.
- Waterproof Integrity: The camera has an IP67 waterproof rating, but avoid directing high-pressure water jets directly at the camera lens or housing during vehicle washing.
- Avoid Harsh Chemicals: Do not use harsh chemicals or solvents near the camera or tailgate handle bezel, as these can damage the finish or electronic components.
8. Troubleshooting
If you encounter issues with your TRQ Park Assist Camera, refer to the following troubleshooting steps:
8.1 No Image on Monitor
- Check Power Connection: Ensure the camera's power cable is securely connected to a functional 12V power source and that the fuse is intact.
- Verify Video Connection: Confirm the RCA video cable is securely connected to both the camera and the monitor's video input.
- Monitor Input Selection: Ensure your monitor is set to the correct video input channel for the camera.
- Vehicle in Reverse: If wired for automatic activation, ensure the vehicle is in reverse gear.
8.2 Distorted or Poor Image Quality
- Clean Camera Lens: A dirty lens is a common cause of poor image quality. Clean it gently as described in Section 7.
- Check Video Cable: Inspect the video cable for any kinks, pinches, or damage that could interfere with the signal.
- Power Fluctuations: Ensure the camera is receiving stable power. Voltage fluctuations can affect image quality.
8.3 Camera Not Activating Automatically
- Reverse Light Connection: Verify that the camera's power wire is correctly tapped into the vehicle's reverse light circuit.
- Fuse Check: Ensure the fuse on the power cable is not blown.
If these steps do not resolve the issue, it is recommended to consult a professional automotive technician.
9. Warranty and Support
For information regarding warranty coverage and customer support for your TRQ ADA02022 Park Assist Camera Kit, please refer to the documentation provided at the time of purchase or visit the official TRQ website. Keep your purchase receipt as proof of purchase for any warranty claims.
For technical assistance or installation inquiries, it is recommended to contact a qualified automotive professional or the TRQ customer support directly.