1. Introduction
This instruction manual provides essential information for the safe and effective operation of your Metabo LC 12 PowerMaxx 12V Li-ion Battery Charger. Please read this manual thoroughly before using the charger and retain it for future reference. Proper use ensures optimal performance and extends the lifespan of both the charger and your batteries.
2. Safety Instructions
Always observe the following safety precautions to prevent electric shock, fire, or serious injury.
- Read All Instructions: Familiarize yourself with the charger's operation and safety guidelines before use.
- Electrical Safety: Do not expose the charger to rain or wet conditions. Water entering the charger will increase the risk of electric shock. Use only with a power supply matching the specifications (220-240V, 50-60Hz).
- Battery Compatibility: This charger is designed exclusively for Metabo 10.8V - 12V Li-ion battery packs. Do not attempt to charge other types of batteries, as this may cause personal injury and damage.
- Damaged Batteries: Do not charge damaged, deformed, or leaking battery packs.
- Ventilation: Ensure adequate ventilation around the charger during operation. Do not cover the charger.
- Children and Unauthorized Users: Keep the charger out of reach of children and individuals unfamiliar with its operation.
- Unplug When Not in Use: Always unplug the charger from the power outlet when not in use or before cleaning.
- Avoid Extreme Temperatures: Do not operate the charger in extremely hot or cold environments.
3. Product Overview
The Metabo LC 12 charger is a compact unit designed for efficient charging of your Metabo 10.8V-12V Li-ion batteries.
This image displays the Metabo LC 12 PowerMaxx 12V Li-ion Battery Charger, a compact green and black unit designed for charging Metabo 10.8V-12V Li-ion batteries. The charger features a prominent charging slot on the right side and an indicator panel on the front, showing battery status and charging progress.
Components:
- Charging Slot: The designated area for inserting Metabo 10.8V-12V Li-ion battery packs.
- Status Indicator Lights: LEDs that display the current charging status, battery condition, and any error messages.
- Power Cord: Used to connect the charger to a standard electrical outlet.
4. Setup
- Placement: Place the Metabo LC 12 charger on a stable, flat, and non-flammable surface. Ensure there is sufficient space around the charger for proper air circulation.
- Power Connection: Connect the charger's power cord to a compatible 220-240V AC, 50-60Hz electrical outlet.
5. Operating Instructions
Follow these steps to charge your Metabo 10.8V-12V Li-ion battery pack:
- Insert Battery: Slide the Metabo 10.8V-12V Li-ion battery pack into the charging slot on the charger. Ensure it is fully seated and clicks into place.
- Charging Process: The charger will automatically detect the battery and begin the charging process. The status indicator lights will illuminate to show the charging progress.
- Monitor Indicator Lights: Observe the indicator lights for the battery's status:
- Solid Green: The battery is fully charged and ready for use.
- Flashing Green: The battery is currently charging.
- Solid Red: The battery is defective, or its temperature is outside the optimal charging range (too hot or too cold). Remove the battery and allow it to cool down or warm up before attempting to charge again. If the issue persists, the battery may be defective.
- Flashing Red: A charging error has occurred. Remove the battery and reinsert it. If the error persists, consult the troubleshooting section.
- Remove Battery: Once the battery is fully charged (solid green light), remove it from the charger.
6. Maintenance
Regular maintenance ensures the longevity and proper function of your charger.
- Cleaning: Disconnect the charger from the power outlet before cleaning. Use a dry, soft cloth to wipe down the exterior of the charger. Do not use any liquids, solvents, or abrasive cleaners.
- Storage: Store the charger in a dry, dust-free environment when not in use. Avoid storing it in areas with extreme temperatures or high humidity.
- Inspection: Periodically inspect the power cord and charger housing for any signs of damage. If damage is found, discontinue use and contact customer support.
7. Troubleshooting
If you encounter issues with your Metabo LC 12 charger, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not powering on / No indicator lights | No power supply; Loose connection | Check if the power cord is securely plugged into both the charger and the wall outlet. Test the outlet with another device. |
| Battery not charging (Solid Red light) | Battery too hot/cold; Defective battery | Remove the battery and allow it to reach room temperature. Reinsert the battery. If the issue persists, the battery may be defective. |
| Battery not charging (Flashing Red light) | Charging error | Remove the battery from the charger, wait a few seconds, and reinsert it. If the error persists, contact customer support. |
| Charging takes longer than expected | Normal operation for 1A charger; Battery condition | This charger has a 1A charge current. Refer to the specifications for approximate charging times. Older or heavily used batteries may take longer. |
8. Specifications
Technical data for the Metabo LC 12 PowerMaxx 12V Li-ion Battery Charger:
- Model Number: 627108000
- Compatible Battery Voltage: 10.8V - 12V Li-ion
- Input Voltage: 220-240V AC
- Input Frequency: 50-60 Hz
- Max. Charge Current: 1 A
- Approximate Charging Times:
- 2.0 Ah battery: 120 minutes
- 4.0 Ah battery: 240 minutes
- Weight: 200 Grams
- Compliance: CE
9. Warranty and Support
For warranty information, please refer to the documentation provided with your original purchase or visit the official Metabo website. If you require technical assistance or have questions not covered in this manual, please contact Metabo customer support or your authorized dealer.
