1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Ibergrif M22022-2 Self-Sealing Brass Angle Valves. Please read this manual thoroughly before installation and keep it for future reference. These angle valves are designed for plumbing installations, featuring a 1/2" wall connection and a 3/8" outlet connection, with a durable chrome finish.
2. Safety Information
- Always turn off the main water supply before attempting any installation or maintenance.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Wear appropriate personal protective equipment (PPE) such as gloves and eye protection during installation.
- Ensure all connections are tight to prevent leaks, but do not overtighten.
- Do not use abrasive cleaners or harsh chemicals on the chrome finish, as this may damage the surface.
3. Package Contents
The Ibergrif M22022-2 package typically includes:
- 2 x Ibergrif M22022-2 Self-Sealing Brass Angle Valves
- 2 x Decorative Escutcheons (Wall Flanges)
- Installation accessories (e.g., sealing rings, nuts)
Image: The package includes two angle valves, each with a decorative escutcheon and necessary sealing components. The image shows the valve, escutcheon, and a separate connection nut.
4. Product Features
- Self-Sealing Threads: The angle valve threads are designed to be self-sealing, providing a secure and leak-free connection without the need for additional sealing tape or compound.
- Easy Installation: All necessary accessories are included for straightforward installation and maintenance.
- Durable Chrome Finish: Features a bright chrome finish that resists scratches and is easy to clean, maintaining its aesthetic appeal over time.
- Universal Size: Equipped with a G1/2" wall connector and a G3/8" water outlet connector, suitable for standard plumbing applications.
- Robust and Durable: Designed for wall-mounted installation, ensuring robust stability and long-lasting performance. Made from high-quality brass.
Image: A close-up view of the valve's connection point, highlighting the integrated self-sealing ring for easy and secure installation.
Image: Illustration emphasizing the heavy brass construction of the valve, ensuring durability and resistance to corrosion.
5. Installation Instructions
- Prepare the Installation Area:
Ensure the main water supply to the installation area is turned off. Drain any remaining water from the pipes by opening a nearby faucet.
- Thread the Angle Valve:
Carefully thread the G1/2" wall connector of the angle valve into the wall water outlet. The self-sealing threads are designed to create a watertight seal without additional PTFE tape or thread sealant. Hand-tighten first, then use an appropriate wrench to tighten securely, but do not overtighten.
Image: The angle valve securely mounted to the wall, demonstrating the G1/2" connection point.
- Attach the Decorative Escutcheon:
Slide the decorative escutcheon (wall flange) over the valve body until it sits flush against the wall, covering the pipe opening for a clean finish.
- Connect the Water Supply Line:
Connect your flexible water supply line (typically G3/8") from your faucet or toilet to the outlet connector of the angle valve. Hand-tighten the connection nut, then use a wrench to tighten it firmly. Ensure a washer or gasket is properly seated if required by your supply line.
Image: An illustration showing typical applications for the angle valve, connecting to a faucet and a toilet, highlighting the G3/8" outlet connection.
- Check for Leaks:
Slowly turn on the main water supply. Inspect all connections for any signs of leaks. If a leak is detected, turn off the water supply, tighten the connection slightly, and recheck.
6. Operation
The Ibergrif M22022-2 angle valve features a quarter-turn handle for easy water flow control.
- To Open the Valve: Turn the handle counter-clockwise until it stops (typically a quarter turn). This allows water to flow to the connected fixture.
- To Close the Valve: Turn the handle clockwise until it stops. This shuts off the water supply to the connected fixture, useful for maintenance or repairs without affecting the main water supply to the rest of the property.
Image: A detailed view of the valve's ergonomic handle, designed for easy quarter-turn operation.
7. Maintenance and Cleaning
- Cleaning: To maintain the chrome finish, clean the valve regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry with a soft cloth. Avoid abrasive cleaners, scouring pads, or harsh chemicals (e.g., ammonia-based cleaners) as these can damage the finish.
- Inspection: Periodically check the valve and connections for any signs of leaks, corrosion, or wear. Address any issues promptly.
- Operation: Operate the valve periodically (e.g., once every few months) by turning it fully open and closed to prevent mineral buildup and ensure smooth operation.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leak at wall connection | Connection not tight enough; damaged self-sealing thread. | Turn off main water supply. Gently tighten the valve further. If leak persists, remove, inspect threads for damage, and re-install. |
| Water leak at fixture connection | Connection nut loose; missing or damaged washer/gasket in supply line. | Turn off valve. Tighten the connection nut. Check the supply line for a properly seated or damaged washer/gasket and replace if necessary. |
| Valve difficult to turn | Mineral buildup; infrequent use. | Operate the valve fully open and closed several times. If stiffness persists, professional inspection may be required. |
| No water flow to fixture | Valve is closed; main water supply is off; blockage in supply line. | Ensure the valve is fully open. Check if the main water supply is on. Inspect the supply line for kinks or blockages. |
9. Specifications
- Model Number: M22022-2
- Material: Brass
- Finish: Chrome
- Wall Connection Size: G1/2"
- Outlet Connection Size: G3/8"
- Dimensions (L x W x H): 7.6 x 5.2 x 6.5 cm (approximately 52 mm x 76 mm x 65 mm)
- Weight: 210 grams
- Number of Pieces: 2 per box
- Manufacturer: Ibergrif Griferias SL
- Country of Origin: Spain
Image: Technical diagram showing the precise dimensions of the angle valve in millimeters, including connection sizes.
10. Warranty and Support
Ibergrif products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Ibergrif website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
Contact Information:
- Brand Website: Visit Ibergrif Store on Amazon
- For further assistance, please contact your retailer or Ibergrif customer support.
