Introduction
This manual provides essential information for the safe and effective use of your Feit Electric Panel E26 (Medium) LED Bulb. Please read these instructions carefully before installation and retain them for future reference.
Safety Information
- WARNING: Risk of electric shock. Do not open.
- Ensure power is turned OFF at the switch and the main circuit breaker before installation or removal.
- Do not use with dimmers unless explicitly stated on the product packaging.
- Suitable for damp locations. Not for use where directly exposed to water.
- Do not install with wet hands or when standing on wet or damp surfaces.
- This device is not intended for use with emergency exits.
Package Contents
Your Feit Electric Panel E26 LED Bulb package should contain the following:
- 1 x Feit Electric Panel E26 (Medium) LED Bulb
Setup
Follow these steps to install your LED bulb:
- Turn off power: Before beginning installation, ensure the power to the fixture is turned off at the circuit breaker or fuse box.
- Remove old bulb: Carefully unscrew and remove the existing bulb from the fixture.
- Install new bulb: Screw the Feit Electric Panel E26 LED Bulb into the standard E26 (medium) base socket. Ensure it is securely tightened.
- Restore power: Turn the power back on at the circuit breaker or fuse box.
Image of the Feit Electric Panel E26 LED Bulb, showing its panel design and E26 screw base, ready for installation into a compatible light fixture.
Operating
The Feit Electric Panel E26 LED Bulb operates like a standard light bulb:
- Turning On/Off: Use the wall switch connected to the light fixture to turn the bulb on or off.
- Color Temperature Selection (if applicable): Some models may feature a selectable color temperature switch. If your bulb has this feature, locate the switch on the bulb itself (usually near the base) and slide it to your desired color temperature (e.g., 3000K, 4000K, 5000K) before installation or while the power is off.
Maintenance
The Feit Electric Panel E26 LED Bulb requires minimal maintenance:
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: Replace the bulb when it reaches the end of its lifespan or if it becomes damaged. Always turn off power before replacing.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture. | Check the wall switch and circuit breaker. Ensure they are in the 'ON' position. |
| Bulb not screwed in properly. | Turn off power, then re-screw the bulb firmly into the socket. | |
| Bulb is faulty. | Try the bulb in another working fixture. If it still doesn't light, the bulb may need replacement. | |
| Light flickers. | Incompatible dimmer switch. | Remove the bulb from the dimmer circuit or replace the dimmer with an LED-compatible one. This bulb is not designed for dimming. |
| Loose connection. | Turn off power, then re-screw the bulb firmly into the socket. |
Specifications
| Attribute | Value |
|---|---|
| Model Name | Feit Electric Panel E26 (Medium) LED Bulb Daylight 400 Watt Equivalence 1 pk - Case of: 1 |
| Model Number | ADJ8000/5K/LED |
| Base Type | E26 (Medium) |
| Watt Equivalence | 400 Watt |
| Color Temperature | Daylight (5000K, or selectable if applicable) |
| Material | Plastic |
| Item Dimensions (LxWxH) | 4.1 x 6.1 x 10 inches |
| Manufacturer | Feit Electric Co |
Warranty and Support
This product comes with a manufacturer's warranty. For specific warranty details, please refer to the packaging or visit the official Feit Electric website. For technical support or further assistance, please contact Feit Electric customer service.
Feit Electric Customer Service:
- Refer to the contact information provided on the product packaging or the official Feit Electric website (www.feit.com).
