1. Introduction
Thank you for choosing the AIRAUX AA-ER1 Bluetooth 5.0 Graphene RGB Foldable Wireless Stereo Headphones. These headphones are designed to provide a high-quality audio experience with the convenience of wireless connectivity, a foldable design for portability, and dynamic RGB lighting. This manual will guide you through the setup, operation, and maintenance of your new headphones.
Image 1.1: The AIRAUX AA-ER1 Bluetooth 5.0 Graphene RGB Foldable Wireless Stereo Headphones, showcasing their sleek black design and illuminated earcups.
2. Package Contents
Please check the package for the following items:
- AIRAUX AA-ER1 Bluetooth Headphones
- USB-C Charging Cable
- 3.5mm Audio Cable
- User Manual (this document)
3. Product Overview and Controls
Familiarize yourself with the various parts and controls of your headphones.
Image 3.1: A close-up view of the right earcup, showing the control buttons and ports of the AIRAUX AA-ER1 headphones.
Key Features:
Image 3.2: Diagram highlighting key features of the AIRAUX AA-ER1, including Auto RGB Light, 40mm Speaker Driver, Graphene Diaphragm, Long Battery Life, and Comfortable Wearing.
Button Functions:
- Power Button: Press and hold to power on/off. Short press to play/pause music or answer/end calls.
- Volume Up (+): Short press to increase volume. Long press for next track.
- Volume Down (-): Short press to decrease volume. Long press for previous track.
- RGB Light Button: Short press to cycle through RGB lighting modes or turn off RGB.
- Microphone: Built-in for hands-free calls.
- USB-C Port: For charging the headphones.
- 3.5mm Audio Jack: For wired connection.
4. Setup
4.1 Charging the Headphones
Before first use, fully charge the headphones.
- Connect the USB-C charging cable to the USB-C port on the headphones.
- Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
- The LED indicator will show charging status (e.g., red light for charging, blue light for fully charged).
- Charging typically takes approximately 2-3 hours for a full charge.
4.2 Bluetooth Pairing
To connect your headphones to a Bluetooth-enabled device:
- Ensure the headphones are charged and powered off.
- Press and hold the Power Button for approximately 3-5 seconds until the LED indicator flashes blue and red alternately, indicating pairing mode.
- On your device (smartphone, computer, etc.), enable Bluetooth and search for new devices.
- Select "AIRAUX AA-ER1" from the list of available devices.
- Once connected, the LED indicator will flash blue slowly, and you will hear a confirmation tone.
- If prompted for a password, enter "0000".
5. Operating Instructions
5.1 Power On/Off
- Power On: Press and hold the Power Button for 3 seconds.
- Power Off: Press and hold the Power Button for 3 seconds.
5.2 Music Playback
- Play/Pause: Short press the Power Button.
- Volume Up: Short press the '+' button.
- Volume Down: Short press the '-' button.
- Next Track: Long press the '+' button.
- Previous Track: Long press the '-' button.
5.3 Phone Calls
- Answer/End Call: Short press the Power Button.
- Reject Call: Long press the Power Button.
- Redial Last Number: Double-press the Power Button.
5.4 RGB Lighting Control
- Short press the RGB Light Button to cycle through different lighting effects.
- Continue pressing to turn off the RGB lighting.
5.5 Wired Mode (3.5mm Audio Cable)
You can use the headphones in wired mode even if the battery is depleted.
- Connect one end of the 3.5mm audio cable to the 3.5mm audio jack on the headphones.
- Connect the other end to the audio output port of your device.
- Note: In wired mode, Bluetooth functions, microphone, and button controls (except volume on some devices) may be disabled.
6. Maintenance
To ensure the longevity and optimal performance of your headphones:
- Clean the earcups and headband regularly with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents.
- Store the headphones in a cool, dry place when not in use, preferably in a protective case.
- Do not expose the headphones to extreme temperatures, humidity, or direct sunlight.
- Avoid dropping or subjecting the headphones to strong impacts.
7. Troubleshooting
If you encounter issues with your headphones, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Low battery. | Charge the headphones fully. |
| Cannot pair with device. | Headphones not in pairing mode; device Bluetooth off; too far from device. | Ensure headphones are in pairing mode (flashing red/blue). Turn device Bluetooth off/on. Move headphones closer to device (within 10m). |
| No sound or low volume. | Volume too low; incorrect audio output selected; headphones not connected. | Increase volume on headphones and device. Check device's audio output settings. Re-pair headphones. |
| Microphone not working. | Incorrect input device selected on computer/smartphone. | Check microphone input settings on your device. |
| RGB lights not working. | RGB function turned off or low battery. | Press the RGB Light Button to activate. Charge the headphones. |
8. Specifications
| Feature | Specification |
|---|---|
| Model | AA-ER1 |
| Bluetooth Version | 5.0 |
| Connectivity Technology | Bluetooth, 3.5mm Jack |
| Material | Graphene (Diaphragm) |
| Impedance | 32 Ohm |
| Microphone Form Factor | Integrated |
| Compatible Devices | Smartphones, Desktops |
| Charging Port | USB Type-C |
| Color | Black |
9. Safety Information
Please read and follow these safety guidelines:
- Do not disassemble, repair, or modify the headphones. This may cause fire, electric shock, or complete damage to the product.
- Keep the headphones away from water and other liquids.
- Avoid prolonged exposure to high volume levels to prevent hearing damage.
- Do not use the headphones in situations where inability to hear ambient sounds could be dangerous (e.g., driving, cycling, walking in traffic).
- Keep out of reach of children.
10. Warranty and Support
AIRAUX products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official AIRAUX website. Please retain your proof of purchase for warranty claims.
