Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Z-Lite 590F-BK Ansel Outdoor Flush Mount Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- This fixture is designed for outdoor use and is water resistant.
- Ensure the mounting surface can support the weight of the fixture.
- Do not exceed the maximum wattage specified for the bulb.
- The fixture is UL Listed, indicating compliance with safety standards.
- Legal Disclaimer: Please check your local laws before purchasing and installing this product.
Package Contents
Verify that all components are present before beginning installation:
- Fixture Assembly (1)
- Mounting Hardware Kit (1)
- Shade (1)
This image displays the Z-Lite 590F-BK Ansel Outdoor Flush Mount Light, showcasing its black finish, dome-shaped shade, and clear seeded glass diffuser enclosing the bulb.
Setup and Installation
Professional installation is recommended. Follow these general steps for installation:
- Turn Off Power: Locate the circuit breaker or fuse box and turn off the power supply to the junction box where the fixture will be installed.
- Prepare Mounting Surface: Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
- Connect Wiring:
- Connect the black wire from the fixture to the black (hot) wire from the junction box.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box.
- Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box.
- Secure all connections with approved wire connectors.
- Mount Fixture: Carefully align the fixture with the mounting screws on the electrical box and secure it in place using the provided hardware.
- Install Bulb: Insert one E26 Medium base incandescent bulb (maximum 100 Watts) into the socket. Do not overtighten.
- Restore Power: Once the fixture is securely installed and the bulb is in place, restore power at the circuit breaker or fuse box.
This technical drawing provides the key dimensions of the Z-Lite 590F-BK fixture, indicating a width of 10.9 inches and a height of 10.7 inches from the mounting surface.
An example of the Z-Lite Ansel Outdoor Flush Mount Light installed on a covered outdoor porch, demonstrating its aesthetic integration with residential architecture.
Operating Instructions
The Z-Lite 590F-BK Ansel Outdoor Flush Mount Light operates via a standard wall switch. If connected to a compatible dimmer switch, the light output can be adjusted.
Maintenance
- Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Bulb Replacement: Ensure power is off before replacing the bulb. Allow the old bulb to cool completely before removal. Replace with an E26 Medium base incandescent bulb, not exceeding 100 Watts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to fixture Loose wire connections Defective bulb | Check circuit breaker/fuse Verify all wire connections are secure Replace bulb |
| Light flickers | Loose bulb Incorrect bulb type for dimmer Faulty dimmer switch | Tighten bulb Ensure bulb is dimmable if using a dimmer Consult an electrician to check dimmer switch |
Specifications
| Feature | Detail |
|---|---|
| Brand | Z-Lite |
| Model Number | 590F-BK |
| Product Dimensions | 11 x 11 x 10.75 inches (Length x Width x Height) |
| Item Weight | 2 Pounds |
| Material | Aluminum (Fixture), Synthetic (Shade) |
| Finish | Black |
| Light Source Type | Incandescent |
| Max Wattage | 100 Watts |
| Voltage | 120 Volts |
| Bulb Base | E26 Medium |
| Brightness | 1350 Lumens (with compatible bulb) |
| Indoor/Outdoor Usage | Outdoor |
| Special Features | Dimmable, Water Resistant |
| Certifications | UL Listed |
Warranty Information
This Z-Lite product is covered by a manufacturer's warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact Z-Lite customer support directly.
Support
For technical assistance, missing parts, or any questions regarding your Z-Lite 590F-BK Ansel Outdoor Flush Mount Light, please contact Z-Lite customer support. Refer to the product packaging or the official Z-Lite website for current contact information.
