Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Legrand Renov Floor Box 16/24M (Model 088192). Please read this manual thoroughly before using the product and retain it for future reference.
The Legrand Renov Floor Box is designed for organizing electrical installations within floor structures, providing a robust and integrated solution for power and data distribution.
Safety Information
WARNING: Electrical installations should only be performed by qualified personnel in accordance with all local and national electrical codes and regulations.
- Always disconnect power before installing or servicing the floor box.
- Ensure all connections are secure and properly insulated.
- Do not expose the product to excessive moisture or extreme temperatures.
- Use appropriate personal protective equipment (PPE) during installation.
- Verify that the product is suitable for the intended application and environment.
Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- 1 x Legrand Renov Floor Box 16/24M (Model 088192)
- Instruction Manual (this document)
- Additional components may vary based on specific product configuration.
Setup and Installation
The Legrand Renov Floor Box 16/24M is designed for integration into floor structures. Proper installation ensures optimal performance and safety.
- Preparation:
- Ensure the installation area is clean, dry, and free from obstructions.
- Confirm that the floor opening dimensions match the specifications of the floor box (25 x 25 x 10 cm).
- Gather all necessary tools, including screwdrivers, wire strippers, and safety equipment.
- Mounting the Floor Box:
- Carefully place the floor box into the prepared opening in the floor.
- Secure the box using appropriate fasteners (not included, refer to local building codes for suitable fixings) to ensure it is flush and stable with the floor surface.
- Wiring Connections:
- Route electrical cables and data lines into the floor box through the designated entry points.
- Connect wires to the appropriate modules or outlets within the box, following standard electrical practices and local codes. Ensure proper grounding.
- Verify all connections are tight and secure.
- Module Installation (if applicable):
- Install any required electrical outlets, data ports, or other modules into the floor box's internal frame.
- Ensure modules are correctly seated and secured.
- Final Assembly:
- Attach the cover or lid to the floor box, ensuring it fits securely and is flush with the floor.
- Test all installed outlets and connections for proper functionality before use.
Operating Instructions
Once installed, the Legrand Renov Floor Box operates as a passive distribution point for power and data. Its primary function is to provide accessible and protected connections.
- Accessing Connections: To access the internal connections, carefully open the lid or cover of the floor box.
- Connecting Devices: Plug electrical devices or data cables into the installed outlets or ports within the floor box.
- Closing the Box: After use, ensure the lid is securely closed to protect the internal components from dust, debris, and accidental damage.
- Load Capacity: Do not exceed the maximum electrical load capacity of the installed outlets or the overall circuit. Refer to the specifications of the installed modules for details.
Maintenance
Regular maintenance ensures the longevity and safe operation of your Legrand Renov Floor Box.
- Cleaning: Periodically clean the exterior of the floor box with a soft, damp cloth. Avoid abrasive cleaners or solvents. Ensure the box is dry before closing the lid.
- Inspection: Annually inspect the floor box for any signs of wear, damage, or loose connections. Check the integrity of the lid and seals.
- Internal Check: If accessible and safe to do so (with power disconnected), periodically check internal wiring and connections for tightness and corrosion.
- Replacement: If any part of the floor box or its internal components becomes damaged, replace it immediately with genuine Legrand parts or equivalent.
Troubleshooting
This section addresses common issues you might encounter with the Legrand Renov Floor Box.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power from outlets. |
|
|
| Data connection issues. |
|
|
| Lid does not close properly. |
|
|
If you are unable to resolve an issue, contact a qualified electrician or Legrand customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 088192 |
| Product Dimensions (L x W x H) | 25 x 25 x 10 cm |
| Weight | 400 grams |
| Brand | Legrand |
| Included Components | Floor Box (Cuve) |
| Type | Renov Floor Box (Bac cuve Renov Caisse de sol) |
Warranty and Support
Legrand products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Legrand website.
For technical assistance, product inquiries, or to report an issue, please contact Legrand customer support through their official channels. Contact information can typically be found on the Legrand website or product packaging.
Legrand Official Website: www.legrand.com
