Ikea ORREVIK Sink Strainer Instruction Manual

1. Product Overview

The Ikea ORREVIK Sink Strainer, Model 045.607, is designed to prevent food particles and debris from entering your kitchen sink drain, ensuring smooth water flow and preventing clogs. This chrome-plated accessory combines functionality with a clean aesthetic, suitable for various kitchen decors.

The image displays the Ikea ORREVIK Sink Strainer, Model 045.607.85, alongside its packaging. The strainer components include a chrome-plated top, various gaskets, and a white plastic base. The packaging shows the product name 'ORREVIK' and symbols indicating the quantity of each component (1x screw, 1x housing, 2x rings, 1x strainer basket), along with the article number 045.607.85.

2. Setup and Installation

Proper installation ensures optimal performance and prevents leaks. If you are unsure about any step, it is recommended to consult a qualified plumber.

1. Preparation: Ensure the sink drain opening is clean and free from old sealant or debris. Gather necessary tools such as a screwdriver, plumber's putty or silicone sealant, and a wrench.
2. Apply Sealant: Roll a thin bead of plumber's putty or apply silicone sealant around the underside of the strainer's top flange (the chrome-plated part).
3. Position Strainer Top: Insert the strainer top into the sink drain opening from above. Press firmly to create a seal.
4. Assemble from Below: From underneath the sink, slide the rubber gasket, then the friction washer, and finally the locknut onto the threaded portion of the strainer body.
5. Tighten: Hand-tighten the locknut, then use a wrench to tighten it further. Be careful not to overtighten, which can damage the sink or strainer.
6. Connect Plumbing: Attach the drain pipe to the bottom of the strainer body, ensuring all connections are secure and sealed.
7. Test for Leaks: Run water into the sink and check underneath for any leaks. Tighten connections as needed.

3. Operating Instructions

The ORREVIK Sink Strainer is designed for simple operation to manage water drainage and prevent debris from entering the plumbing system.

• Open Position: To allow water to drain freely, ensure the strainer basket is in its raised position.
• Closed Position: To retain water in the sink, push the strainer basket down firmly until it seals against the drain opening.
• Debris Collection: The basket will collect food particles and other debris. Regularly lift the basket to remove accumulated waste.

4. Maintenance and Care

Regular cleaning and maintenance will prolong the life of your sink strainer and maintain its appearance.

• Daily Cleaning: Remove the strainer basket and empty any collected debris into the trash. Rinse the basket under running water.
• Weekly Cleaning: For a more thorough clean, use a mild dish soap and a soft brush or sponge to clean the chrome-plated parts and the plastic base. Rinse thoroughly.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, or strong chemical detergents, as these can damage the chrome finish and plastic components.
• Check Seals: Periodically inspect the rubber gaskets for signs of wear or cracking. Worn gaskets may lead to leaks and should be replaced.

5. Troubleshooting

If you encounter issues with your ORREVIK Sink Strainer, refer to the following common problems and solutions.

• Slow Drainage:
  Cause: Strainer basket is full of debris or there is a partial clog in the drain pipe.
  Solution: Empty and clean the strainer basket. If drainage is still slow, the clog may be further down the pipe and require professional attention or a drain cleaner.
• Water Leaks from Underneath Sink:
  Cause: Loose connections or damaged gaskets.
  Solution: Ensure the locknut underneath the sink is securely tightened. Check the rubber gasket and friction washer for proper placement and condition. Replace any worn or damaged gaskets. Reapply plumber's putty or sealant if necessary.
• Strainer Does Not Hold Water:
  Cause: Debris under the strainer basket preventing a seal, or a worn gasket.
  Solution: Remove the strainer basket and clean the drain opening thoroughly. Ensure no debris is obstructing the seal. Inspect the rubber gasket on the basket for damage; replace if necessary.

6. Specifications

7. Warranty and Support

For information regarding warranty coverage or to obtain support for your Ikea ORREVIK Sink Strainer, please refer to the purchase documentation or contact Ikea customer service directly. Specific warranty terms may vary by region and purchase date.