OutdoorMaster A0-blackframe Revosilverlens Vlt10%

OutdoorMaster Ski Goggles PRO - Instruction Manual

Model: A0-blackframe Revosilverlens Vlt10%

Introduction

Thank you for choosing OutdoorMaster Ski Goggles PRO. These high-performance ski goggles are designed for ultimate comfort and clear vision on the slopes. They feature a frameless design with a large spherical lens, an interchangeable lens system, OTG (Over-The-Glasses) compatibility, and universal helmet compatibility. All lenses offer 100% UV400 protection and are anti-fog coated.

OutdoorMaster Ski Goggles PRO with a snowy mountain reflection

Figure 1: OutdoorMaster Ski Goggles PRO

Setup

Unboxing Contents

Upon opening your package, please ensure all items are present:

  • 1 x OutdoorMaster Ski Goggles PRO
  • 1 x Protective Case
  • 1 x Carrying Pouch
Contents of the OutdoorMaster Ski Goggles PRO package including goggles, protective case, carrying pouch, and an extra lens

Figure 2: Package Contents

Lens Installation and Removal

The Ski Goggles PRO feature a magnetic interchangeable lens system, allowing for quick and easy lens swaps to adapt to different light conditions.

  1. To Remove: Gently pull the lens away from the frame. The strong magnets will release, allowing the lens to detach.
  2. To Install: Align the new lens with the frame. The magnets will guide the lens into place, securing it firmly. Ensure the lens is fully seated before use.
Close-up of OutdoorMaster Ski Goggles PRO showing the magnetic interchangeable lens system with the lens detached from the frame

Figure 3: Magnetic Lens System

Video 1: Demonstrating the magnetic lens interchangeability (0:30-0:35 in video).

Helmet Compatibility

The extra-long elastic strap and pivoting outriggers ensure excellent compatibility with all types of ski and snowboard helmets, providing a secure and comfortable fit.

Person wearing OutdoorMaster Ski Goggles PRO with a helmet, showing proper fit

Figure 4: Goggles with Helmet

Operating Your Goggles

OTG (Over-The-Glasses) Design

The Ski Goggles PRO are designed to fit comfortably over most prescription glasses, allowing you to wear your eyewear underneath without discomfort or obstruction.

Close-up of OutdoorMaster Ski Goggles PRO showing prescription glasses worn underneath the goggles

Figure 5: OTG Design

Lens Selection (VLT - Visual Light Transmission)

Choosing the correct lens VLT is crucial for optimal visibility in varying weather conditions. VLT indicates the percentage of visible light that passes through the lens.

  • Bright Sun (Low VLT 8%-18%): Darker lenses for sunny days to reduce glare.
  • Variable Sun & Cloudy (Medium VLT 18%-43%): Versatile lenses for mixed conditions.
  • Overcast & Storm (High VLT 43%-80%): Lighter lenses to enhance contrast in low light.
  • Night (Very High VLT 80%-100%): Clear or very lightly tinted lenses for night skiing.
VLT reference scope chart showing different light conditions and corresponding VLT percentages for ski goggles

Figure 6: VLT Reference Scope

OutdoorMaster offers a wide range of over 20 different lenses to suit all conditions. Extra lenses are sold separately.

Collection of 20 different colored interchangeable ski goggle lenses

Figure 7: Available Lens Colors

Maintenance

Cleaning Your Goggles

  • Lenses: Gently wipe the outer lens with the provided carrying pouch or a soft, non-abrasive cloth. Do not rub the inner anti-fog lens surface vigorously, as this can damage the coating. Avoid using harsh chemicals or abrasive cleaners.
  • Frame & Strap: Clean the frame and strap with mild soap and water. Rinse thoroughly and air dry.

Storage

Always store your goggles in the provided protective case or carrying pouch when not in use. This protects the lenses from scratches and impacts, and helps maintain the anti-fog coating.

Contents of the OutdoorMaster Ski Goggles PRO package including goggles, protective case, carrying pouch, and an extra lens

Figure 8: Protective Case and Carrying Pouch

Troubleshooting

Fogging

While all lenses are anti-fog coated, extreme conditions can sometimes lead to fogging. To minimize fogging:

  • Ensure proper ventilation by not blocking the vents on the goggles.
  • Avoid placing goggles on your forehead, as body heat can cause condensation.
  • Shake off any snow from the vents before entering warm indoor environments.

Lens Scratches

To prevent scratches, always store your goggles in the protective case when not in use and avoid placing them face down on hard or abrasive surfaces.

Fit Issues

If your goggles do not fit comfortably or securely:

  • Adjust the elastic strap to achieve a snug but comfortable fit around your helmet or head.
  • Ensure the pivoting outriggers are correctly positioned to integrate with your helmet.

Specifications

FeatureDescription
BrandOutdoorMaster
ModelSki Goggles PRO (A0-blackframe Revosilverlens Vlt10%)
Lens TypeSpherical, Frameless, Interchangeable
UV Protection100% UV400
Anti-FogYes
OTG (Over-The-Glasses)Yes
Helmet CompatibilityUniversal (Extra long elastic strap)
DepartmentUnisex Adult
ManufacturerOutdoorMaster

Warranty & Support

OutdoorMaster is committed to providing friendly customer service. For any inquiries, support, or warranty claims, please visit the official OutdoorMaster Store or contact their customer service directly.

OutdoorMaster Store: https://www.amazon.com/stores/OutdoorMaster/page/5A144F2A-5070-46A0-A43B-2A3C05C3FE2D

© 2024 OutdoorMaster. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.