JMGO 100-inch Ambient Light Rejecting (ALR) Ultra Short Throw Projector Screen Instruction Manual

1. Introduction

Thank you for choosing the JMGO 100-inch Ambient Light Rejecting (ALR) Ultra Short Throw Projector Screen. This screen is designed to enhance your home theater experience by providing superior image quality, accurate color reproduction, and high contrast, even in environments with ambient light. It is specifically engineered for use with Ultra Short Throw (UST) projectors, delivering stunning 4K Ultra HD and 3D visuals.

2. Setup and Installation

Proper installation is crucial for optimal performance. Please follow these steps carefully.

2.1 Unboxing and Inspection

Carefully unbox the projector screen and inspect all components for any damage. Ensure all parts listed in the packing list are present.

2.2 Screen Dimensions

The JMGO 100-inch ALR screen features precise dimensions for an immersive viewing experience. The display area measures approximately 77.6 inches in width and 43.6 inches in height, providing a true 100-inch diagonal display.

JMGO 100-inch ALR Projector Screen dimensions — Figure 1: Approximate dimensions of the JMGO 100-inch ALR Projector Screen, showing a width of 77.6 inches and a height of 43.6 inches for a 100-inch diagonal display.

2.3 Ultra Slim Frame Design

The screen features an ultra-slim 0.4-inch frame, designed to maximize the viewing area and provide a sleek, modern aesthetic. This minimal bezel helps to make colors richer and pictures more three-dimensional and vivid.

JMGO 0.4-inch Ultra Slim Frame — Figure 2: Close-up view of the JMGO screen's 0.4-inch ultra-slim frame, highlighting its minimalist design.

2.4 Magnetic Adsorption Installation

The JMGO ALR screen supports magnetic adsorption for a no-hole installation. This method allows for easy attachment to the wall without drilling, preventing damage to your wall surface.

Magnetic Adsorption No Hole Installation — Figure 3: Illustration of the magnetic adsorption installation method, showing the screen being magnetically attached to a wall without the need for drilling.

2.5 Motorized Floor Rising Screen Setup

For motorized floor rising screens, follow the specific instructions provided in the video below for unboxing, testing, and pairing with your projector.

Video 1: Detailed guidance on unboxing, testing, and pairing a motorized floor rising screen with a projector. This video covers initial setup and synchronization steps.

Video 2: A demonstration of a motorized floor rising projector screen in action, showcasing its smooth operation and integration into a home theater environment.

Video 3: This video illustrates the functionality and benefits of a motorized floor rising ALR screen, including its ability to retract and deploy with ease.

3. Operating Instructions

Once installed, operating your JMGO ALR screen is straightforward, especially when paired with a compatible UST projector.

3.1 Powering On and Synchronization

If your screen is a motorized model and is synchronized via USB with your UST projector, it will automatically rise when the projector is powered on. Refer to the setup videos for detailed synchronization steps.

3.2 Ambient Light Rejection

The ALR material rejects 90% of ambient light, allowing for vibrant and clear images even in well-lit rooms. This feature significantly enhances contrast by 110x compared to standard matte white screens.

Ambient Light Rejecting Projector Screen — Figure 4: The JMGO screen displaying a vibrant image in a room with ambient light, demonstrating its light-rejecting capabilities.

4. Maintenance

To ensure the longevity and optimal performance of your JMGO ALR Projector Screen, follow these maintenance guidelines:

Cleaning: Gently wipe the screen surface with a soft, lint-free cloth. For stubborn marks, use a slightly damp cloth with mild soap and water. Avoid harsh chemicals or abrasive materials.
Handling: Avoid touching the screen surface directly with your fingers to prevent smudges or damage.
Storage (Motorized Screens): When not in use, ensure motorized screens are fully retracted into their housing to protect the screen material from dust and physical damage.
Environmental Conditions: Keep the screen away from direct sunlight for prolonged periods and extreme temperatures to prevent material degradation.

5. Troubleshooting

If you encounter any issues with your JMGO ALR Projector Screen, refer to the common problems and solutions below. For motorized screens, the provided video offers specific troubleshooting steps.

5.1 Common Issues for Motorized Screens

Video 4: This video provides troubleshooting guidance for common operational issues with motorized floor rising screens, including solutions for screen height adjustment and wrinkle elimination.

5.2 General Troubleshooting

Wavy Screen Surface: Ensure the screen is properly tensioned and installed according to the magnetic adsorption guidelines. For motorized screens, refer to the troubleshooting video for wrinkle elimination steps.
Poor Image Quality: Verify that your projector is an Ultra Short Throw (UST) model, as this screen is specifically designed for UST projectors. Adjust projector settings for optimal focus and alignment.
Screen Not Rising/Retracting (Motorized): Check power connections and ensure the remote control is paired correctly. If using USB synchronization, confirm the dongle is properly inserted and the projector is powered on.

6. Specifications

Feature	Detail
Brand	JmGO
Display Dimensions	100 inches
Material	Specialized Fabric
Screen Surface Description	Matte (Ambient Light Rejecting)
Mounting Type	Wall Mount, Ceiling Mount (Magnetic Adsorption for fixed frame)
Compatibility	Ultra Short Throw (UST) Projectors Only
Image Enhancement	4K Ultra HD, 3D Active Ready, 90% Ambient Light Rejection, 110x Contrast Enhancement
Item Weight	55.9 pounds
Package Dimensions	94 x 11 x 10 inches

7. Warranty and Support

For warranty information, please refer to the documentation included with your product packaging. If you require technical assistance or have any questions not covered in this manual, please contact JMGO Customer Service.

Customer Support Email: after-sales@jmgo.com

JMGO Customer Service Representative — Figure 5: A JMGO customer service representative ready to assist with product inquiries and support.

	JMGO O1 Pro Ultra Short Throw Projector: User Manual & Guide Explore the JMGO O1 Pro Ultra Short Throw Projector with this comprehensive user manual. Learn about its 4K support, 1500 ANSI Lumens, 1080P FHD resolution, Dynaudio speakers, Smart DLP technology, auto focus, keystone correction, and home theater capabilities. Includes setup, operation, safety, and warranty details.
	JMGO Projector Frequently Asked Questions and Support Comprehensive FAQ for JMGO projectors, covering setup, features like 3D and Bluetooth, troubleshooting, and after-sales support. Learn how to adjust image size, connect devices, and resolve common issues.
	JMGO C61A PicoFlix Quick Start Guide Concise and SEO-optimized HTML version of the JMGO C61A PicoFlix Quick Start Guide, providing essential setup and usage information for the projector.
	JMGO N1 Ultra Quick Start Guide This guide provides essential information for setting up and using the JMGO N1 Ultra projector, including safety notices, scope of delivery, remote control functions, app integration, and laser safety parameters.
	JMGO O2S Ultra 4K Projector Quick Start Guide A quick start guide for the JMGO O2S Ultra 4K projector, covering setup, remote control functions, product features, safety information, and technical specifications.
	JMGO PicoPlay+ Stand Portable Power Bank Tripod User Manual User manual for the JMGO PicoPlay+ Stand, a portable power bank tripod for mobile projectors. Features integrated power, Type-C connectivity, and a 1/4-inch mount for easy setup and screen casting.

JmGO 100-inch ALR Projector Screen