Introduction
This manual provides detailed instructions for the safe and effective use of your VGR V-262 Electric Hair Clipper. Please read this manual thoroughly before first use and retain it for future reference. This device is designed for personal hair trimming and dry shaving.
Important Safety Information
To reduce the risk of injury, electric shock, fire, or damage to the product, always observe the following basic safety precautions:
- Avoid contact with eyes and skin.
- Do not use on infants.
- Keep away from water sources. Do not immerse the clipper in water or use it near bathtubs, showers, basins, or other vessels containing water.
- Always unplug the clipper and allow it to cool before cleaning.
- Do not use the clipper while it is charging.
- Always follow recommended cleaning and maintenance procedures to ensure proper function and longevity.
- Do not attempt to repair or disassemble the clipper yourself. Contact qualified service personnel for any repairs.
Package Contents
The VGR V-262 Electric Hair Clipper package includes the following items:
- VGR V-262 Hair Trimmer
- 3 Guide Combs (1mm, 2mm, 3mm)
- USB Charging Cable
- Cleaning Brush
- Lubricating Oil
- Protection Cap
Image: Side of the VGR V-262 product packaging, confirming the included accessories in various languages.
Product Overview
The VGR V-262 is a portable, rechargeable electric hair clipper designed for men. It features a precision stainless steel blade for close cutting and offers cord/cordless operation for convenience. The device is equipped with an 800mAh Lithium battery, providing extended operating time.
Image: Front view of the VGR V-262 Electric Hair Clipper, highlighting its design and VGR branding.
Image: Product packaging front, illustrating key features such as professional blades, 800mAh Lithium battery, and USB charging.
Image: Product packaging back, detailing charging and operating times, along with descriptions of the precision blade, on/off switch, and USB charging functionality.
Setup
1. Initial Charging
Before using your VGR V-262 Electric Hair Clipper for the first time, ensure it is fully charged. Connect the USB charging cable to the clipper and a suitable USB power adapter (not included). A full charge takes approximately 2 hours, providing up to 150 minutes of operating time. The charging indicator light will show the charging status.
2. Attaching Guide Combs
To achieve different hair lengths, select one of the three provided guide combs (1mm, 2mm, or 3mm). Align the comb with the clipper blade and push it firmly until it clicks securely into place. To remove, gently pull the comb away from the blade.
Image: The three guide combs (1mm, 2mm, 3mm) and the cleaning brush, essential accessories for customized trimming and maintenance.
Operating Instructions
1. Power On/Off
To turn the clipper on, slide the On/Off switch located on the side of the device. Slide the switch again to turn it off.
2. Hair Trimming
For optimal results, use the clipper on clean, dry hair. Hold the clipper with the blade flat against the skin or at a slight angle, depending on the desired cut. Move the clipper slowly and steadily against the direction of hair growth. Use the guide combs to achieve uniform hair length.
3. Dry Shaving
The VGR V-262 is suitable for dry shaving. Ensure your skin is clean and dry before use. Gently glide the clipper over the skin, applying light pressure.
Maintenance and Cleaning
1. Cleaning the Blade
After each use, turn off the clipper and remove any attached guide comb. Use the provided cleaning brush to carefully remove hair clippings from the blade and the clipper housing. Do not rinse the blade directly under water unless specified as waterproof (this model is not specified as waterproof).
2. Oiling the Blade
To maintain optimal cutting performance and extend the life of the blades, periodically apply a small drop of the included lubricating oil to the teeth of the blades. Turn on the clipper for a few seconds after oiling to allow the oil to distribute evenly.
3. Storage
Store the clipper in a dry place, away from direct sunlight and out of reach of children. Always use the protection cap to cover the blade when the clipper is not in use to prevent damage.
Troubleshooting
- Clipper not turning on: Ensure the clipper is fully charged. Check the USB charging cable connection for proper contact.
- Reduced cutting performance: Clean the blades thoroughly with the cleaning brush to remove any trapped hair. Apply lubricating oil to the blades as described in the maintenance section.
- Unusual noise or vibration: Clean and oil the blades. If the issue persists, discontinue use and contact customer support. Do not attempt to force the blades or disassemble the unit.
Specifications
| Feature | Detail |
|---|---|
| Model Number | V-262 (MT510) |
| Brand | VGR |
| Power Source | Battery Powered |
| Operating Function | Dry |
| Number of Speed Settings | 1 |
| Number of Heads | 4 (including 3 guide combs) |
| Blade Material | Stainless Steel |
| Special Features | Portable, Rechargeable |
| Charging Time | Approx. 2 Hours |
| Operating Time | Approx. 150 Minutes |
| Targeted Group | Men |
| Recommended Uses | Head |
| Item Weight | 15 Grams |
| Country of Origin | China |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact VGR customer service through their official website or authorized retailers. Keep your purchase receipt as proof of purchase for any warranty claims.
