Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Parsec 8-in-1 Australian Shepherd Antenna. This high-performance antenna is designed for mobile and fixed wireless applications, supporting 5G, CAT18 (600 MHz – 6GHz) with 4x4 MIMO LTE, 2x2 MIMO WiFi, Bluetooth, and GPS capabilities.
Product Overview
The Parsec Australian Shepherd Series antenna is an IP67-rated external antenna featuring a low-profile design. It is equipped with SMA male connectors and 15 ft. cables for comprehensive connectivity.
Key Features:
- 8-in-1 High-performance antenna: 4 LTE/5G, 2 WiFi, BT, GPS.
- IP67 environmental rating.
- Supports 5G, CAT18, CBRS, and LTE LAA frequencies.
- Low profile silhouette, designed to accommodate modern low profile LED light bars.
- Optimized for use with devices like the Cradlepoint R1900 Series Router.
Setup and Installation
Proper installation is crucial for optimal antenna performance. Ensure all connections are secure and follow the mounting guidelines.
Mounting Requirements:
- Mounting Hole: A 1.5-inch diameter hole is required for the thread mount.
- Bolt Length: The antenna features a 0.7-inch bolt length for secure attachment.
Step-by-step Installation:
- Identify a suitable mounting location on your vehicle or fixed structure. The location should provide a clear line of sight for optimal signal reception and accommodate the antenna's dimensions (2.01 inch height x 2.45 inch width x 13.15 inch length).
- Drill a 1.5-inch diameter hole at the chosen mounting point. Ensure the surface is clean and free of debris.
- Insert the antenna's threaded bolt through the drilled hole.
- Secure the antenna from the underside using the provided nut, ensuring a tight fit to maintain the IP67 rating.
- Route the eight 15 ft. SMA male cables to your networking device (e.g., Cradlepoint R1900 Series Router).
- Connect each cable to the corresponding port on your device: 4 LTE/5G, 2 WiFi, 1 BT, and 1 GPS. Ensure correct port matching for each function.
Image: Top-down view of the Parsec 8-in-1 Australian Shepherd Antenna, illustrating its low-profile design and the central mounting bolt. This view highlights the compact form factor suitable for various installations.
Image: Rear view of a vehicle demonstrating the Parsec antenna mounted on the roof. The antenna is strategically placed to allow for the installation of an LED light bar, showcasing its low-silhouette design. Red circles indicate the mounting points.
Operating Instructions
Once the antenna is securely installed and connected to your compatible networking device, its operation is typically managed through the connected device's interface.
Antenna Functionality:
- LTE/5G: Provides high-speed cellular connectivity across various bands (e.g., AT&T, Verizon, T-Mobile bands listed in specifications).
- WiFi: Supports 2.4 GHz and 5 GHz WiFi 6 for local wireless networking.
- Bluetooth (BT): Enables short-range wireless communication.
- GPS: Offers accurate global positioning system data.
Refer to your networking device's user manual for specific instructions on configuring and utilizing the LTE, WiFi, BT, and GPS functions with the connected antenna.
Maintenance
The Parsec Australian Shepherd Antenna is designed for durability and requires minimal maintenance due to its IP67 rating.
- Cleaning: Periodically clean the antenna's radome with a soft, damp cloth to remove dirt or debris that may accumulate. Avoid abrasive cleaners or solvents.
- Inspection: Regularly inspect the antenna for any physical damage, loose connections, or signs of wear on the cables. Ensure the mounting nut remains tight.
- Environmental Protection: The IP67 rating ensures protection against dust ingress and temporary immersion in water. However, avoid prolonged submersion or exposure to extreme physical impact.
Troubleshooting
If you experience issues with your Parsec antenna, consider the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor signal reception (LTE/WiFi/GPS) |
|
|
| No GPS signal |
|
|
| Antenna feels loose after installation |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | PTA8AS4L2WBG15B |
| Antenna Type | 8-in-1 High-performance (4 LTE/5G, 2 WiFi, BT, GPS) |
| LTE Frequency Range | 617–894 MHz, 1710–2700 MHz, 3400–4000 MHz (CBRS), 5150–5925 MHz (LTE LAA) |
| WiFi Frequency Range | 2400–2483.5 MHz, 4900–5900 MHz |
| Connectors | SMA Male (8 connectors) |
| Cable Length | 15 ft. (per cable) |
| Mounting Type | Thread Mount |
| Mounting Hole Diameter | 1.5 inches |
| Bolt Length | 0.7 inches |
| Dimensions (H x W x L) | 2.01 x 2.45 x 13.15 inches |
| Weight | 1 pound |
| IP Rating | IP67 |
| Color | Black |
| Compatible Devices | Designed for Cradlepoint R1900 Series Router |
Warranty and Support
For warranty information and technical support, please refer to the official Parsec website or contact their customer service directly. Keep your purchase receipt and product model number (PTA8AS4L2WBG15B) handy for any inquiries.
Note: This product is covered by standard manufacturer warranties. Specific terms and conditions may apply.
