SodaStream Terra Sparkling Water Maker Machine

Introduction

The SodaStream Terra Sparkling Water Maker is designed to transform plain tap water into sparkling water in seconds. This manual provides essential information for the safe and efficient use of your new appliance.

Key Features:

• Effortless carbonation of tap water.
• Features Quick Connect cylinder technology for easy CO2 cylinder insertion.
• Sleek and compact design suitable for any kitchen counter.
• Includes a 1-liter reusable, BPA-free, and dishwasher-safe carbonating bottle.
• Comes with a 60-liter Quick Connect CO2 gas cylinder.

Setup

Before first use, ensure all packaging materials are removed. Place the SodaStream Terra on a flat, stable surface.

1. Installing the CO2 Cylinder:

1. Remove the back cover of the SodaStream Terra by gently pulling it away from the main unit.
2. Insert the 60-liter Quick Connect CO2 gas cylinder into the back compartment. Ensure the cylinder is upright and aligned with the Quick Connect system.
3. Push the pink handle down to lock the cylinder into place.
4. Replace the back cover by snapping it back onto the unit.

Image: Side view of the SodaStream Terra with the back cover removed, revealing the CO2 cylinder compartment.

Image: Close-up of the Quick Connect system, highlighting the pink handle for securing the CO2 cylinder.

Operating Instructions

1. Prepare the Carbonating Bottle:

1. Fill the 1-liter SodaStream carbonating bottle with cold tap water up to the fill line. Do not overfill.
2. Twist the bottle into the snap-lock mechanism until it is securely in place. The bottle should be held firmly by the machine.

Image: The SodaStream Terra with a filled carbonating bottle securely inserted into the machine.

2. Carbonate the Water:

1. Press the carbonating button located on the top of the machine firmly for about 1 second. Release and repeat 3-5 times for desired carbonation level. A buzzing sound indicates excess CO2 is being released.
2. Do not over-pressurize the bottle.

Image: A hand pressing the carbonating button on the top of the SodaStream Terra machine during operation.

3. Remove the Bottle:

1. Once carbonation is complete, gently pull the bottle forward to release it from the snap-lock mechanism.
2. Add any desired flavorings to your sparkling water. Do not carbonate water with flavorings already added.

Maintenance

Cleaning the Machine:

• Wipe the SodaStream Terra machine with a damp cloth. Do not immerse the machine in water.
• The carbonating bottle is dishwasher safe. Wash regularly to maintain hygiene.

CO2 Cylinder Replacement:

• When the CO2 cylinder is empty, follow the installation steps in reverse to remove it.
• Exchange empty cylinders for full ones at authorized SodaStream retailers.

Troubleshooting

If you encounter issues with your SodaStream Terra, refer to the following common solutions:

• No Carbonation: Ensure the CO2 cylinder is correctly installed and not empty. Make sure the carbonating bottle is securely locked into place.
• Weak Carbonation: Press the carbonating button more times or hold it down slightly longer (up to 1 second per press). Ensure the water is cold, as cold water carbonates better.
• Water Leaking: Check that the carbonating bottle is filled only to the fill line and is securely attached. Ensure the CO2 cylinder is properly seated.
• Machine Not Operating: The SodaStream Terra does not require electricity. If the button is pressed and no CO2 is released, check the cylinder.

Specifications

Image: Diagram illustrating the dimensions of the SodaStream Terra machine.

Warranty and Support

The SodaStream Terra Sparkling Water Maker Machine comes with a 2-year guarantee from the date of purchase. Please retain your proof of purchase for warranty claims.

For further assistance, product registration, or to purchase accessories and replacement CO2 cylinders, please visit the official SodaStream website or contact customer support.