Introduction
This instruction manual provides detailed guidance for the assembly, transformation, operation, and care of your Transformers Studio Series 88 Deluxe Class Sideways action figure. This figure, inspired by Transformers: Revenge of the Fallen, converts between a robot and a sports car mode. Please read all instructions carefully before use to ensure proper handling and to maximize your enjoyment of this collectible figure.
Safety Information
WARNING: Small parts may be generated. Not for children under 3 years. Choking Hazard.
- Keep small parts away from young children to prevent choking.
- Adult supervision is recommended for children aged 8 and up during initial transformation.
- Avoid excessive force during transformation to prevent damage to the figure.
Package Contents
Your package should contain the following items:
- 1 x Sideways Action Figure (Model F3472)
- 1 x Blaster Accessory
- 1 x Removable Backdrop Display
Image: Front packaging of the Sideways figure, displaying the figure in robot mode and the Studio Series 88 branding.
Setup and Transformation
The Sideways figure converts between robot mode and sports car mode in 20 steps. Refer to the visual guide on the back of the packaging for detailed steps. A general overview is provided below.
Robot Mode
Image: Sideways figure in its robot form, showcasing articulation and design.
In robot mode, the figure is highly articulated, allowing for various poses. The included blaster accessory can be held in the figure's hand.
Sports Car Mode
Image: Sideways figure transformed into its sports car mode, ready for display.
To transform Sideways into sports car mode, carefully follow the 20 steps outlined in the visual guide. Ensure all panels and joints are securely aligned to form the vehicle's complete structure.
Transformation Steps Overview (Refer to packaging for full details)
Image: Back packaging illustrating the 20-step transformation process and the removable backdrop feature.
- Begin with the figure in robot mode.
- Carefully articulate the limbs and body panels according to the numbered steps.
- Fold and collapse sections to form the compact vehicle chassis.
- Ensure all tabs and slots are engaged for a secure vehicle mode.
- Reverse the steps to transform back into robot mode.
If you encounter difficulty, gently retrace your steps. Do not force any parts, as this may cause damage.
Operating the Figure
Posing
The Sideways figure features multiple points of articulation in both robot and vehicle modes. Carefully adjust joints at the head, shoulders, elbows, hips, and knees to achieve desired poses. Some joints may be tighter initially; gentle movement will loosen them over time.
Accessory Use
The included blaster accessory can be inserted into the figure's hand in robot mode. Ensure it is firmly seated to prevent it from falling out during play or display.
Removable Backdrop
The figure comes with a removable backdrop inspired by the Shanghai Pursuit scene from Transformers: Revenge of the Fallen. This backdrop can be used to enhance display options for your figure. Simply remove it from the packaging and place your figure in front of it.
Maintenance
Cleaning
To clean your figure, use a soft, dry cloth to gently wipe away dust. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials, as these can damage the paint and plastic.
Storage
Store the figure in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to sunlight can cause discoloration. Keep the figure and its accessories in a secure location to prevent loss or damage.
Troubleshooting
- Difficulty Transforming: If parts are stiff or not aligning, review the visual guide on the packaging. Ensure all previous steps are correctly completed. Do not apply excessive force.
- Loose Joints: Over time, some joints may become loose. This is common with articulated figures. For minor looseness, a small amount of clear nail polish or a similar friction-enhancing liquid can be applied to the joint and allowed to dry, but this should be done with caution and at your own risk.
- Accessory Not Fitting: Ensure the blaster accessory is oriented correctly before attempting to insert it into the figure's hand.
Specifications
| Feature | Detail |
|---|---|
| Brand: | Transformers |
| Model Name: | GEN STUDIO SERIES DLX TF2 SIDEWAYS |
| Model Number: | F3472 |
| Figure Type: | Deluxe Class Action Figure |
| Character: | Sideways (Decepticon) |
| Scale: | 4.5-inch |
| Transformation Steps: | 20 steps (Robot to Sports Car) |
| Recommended Age: | 8 years and up |
| Material: | Plastic |
| Color: | Black, Silver |
| Item Dimensions (L x W x H): | 8"L x 2.5"W x 5"H |
| Item Weight: | 0.07 Kilograms |
| Manufacturer: | Hasbro |
Warranty and Support
This product is manufactured by Hasbro. For any manufacturing defects or issues not covered by normal wear and tear, please contact Hasbro customer support. Specific warranty details may vary by region and purchase location. Please retain your proof of purchase.
For further assistance or to view additional product information, please visit the official Hasbro or Transformers website.
- Manufacturer: Hasbro
- Official Transformers Website: transformers.hasbro.com