Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount. Please read this manual thoroughly before installation to ensure safe and correct usage. Keep this manual for future reference.
Image: The Pipishell Full Motion TV Wall Mount, showcasing its articulating arm and VESA plate.
Safety Information
Improper installation or use of this product can result in serious injury or damage. Please adhere to the following safety guidelines:
- Ensure the mounting surface can safely support the combined weight of the mount and the TV.
- Do not mount on drywall alone. This mount requires installation into a single wood stud, concrete wall, or block wall.
- Use all provided hardware and do not substitute parts.
- If you are unsure about any part of the installation process, consult a qualified professional.
- Keep children and pets away during installation.
Image: Illustration showing compatible wall types: concrete wall, single wood stud, and block wall. A warning indicates not to mount on drywall alone.
Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Pipishell customer support.
| Component | Quantity |
|---|---|
| Wall Plate Assembly | 1 |
| TV Bracket | 1 |
| Mounting Hardware (screws, anchors, washers) | Assorted |
| Instruction Manual | 1 |
Setup & Installation
Follow these steps carefully for a secure installation:
- Verify Compatibility: Before starting, ensure your TV's VESA pattern (Max: 100x100mm, Min: 75x75mm) and weight (Max: 33 lbs) are compatible with this mount.
- Locate Mounting Position: Choose a suitable location on a single wood stud, concrete, or block wall. Use a stud finder to accurately locate the center of the wood stud if applicable.
- Mount Wall Plate: Secure the wall plate to the chosen wall type using the appropriate anchor bolts and hardware. Ensure it is level and firmly attached.
- Attach TV Bracket: Fasten the TV bracket to the back of your television using the provided screws that match your TV's VESA pattern.
- Hang Display: Carefully lift the television with the attached bracket and hook it onto the wall plate assembly. Ensure it is securely seated.
Image: Diagram illustrating VESA mounting patterns (100x100mm, 75x75mm) and maximum load capacity of 33 lbs for TV sizes 13-26 inches.
Image: Visual guide showing three steps: 1) Mount Wall Plate, 2) Attach TV Bracket, 3) Hang Display.
Operating Instructions
Your Pipishell Full Motion TV Wall Mount offers versatile adjustments for optimal viewing:
- Swivel: The mount allows for a swivel range of up to ±90° (depending on TV size and wall distance) to adjust the horizontal viewing angle.
- Tilt: Adjust the vertical tilt from -15° to +5° to reduce glare and find the perfect viewing angle.
- Extension & Retraction: Extend the TV up to 10.6 inches from the wall for flexible positioning or retract it to a mere 2.9 inches for a low-profile look.
- Rotation: The VESA plate can rotate 360° allowing for landscape or portrait orientation of your display.
Image: A TV mounted on the wall, illustrating the swivel motion of ±90° and the extension/retraction range of 2.9 to 10.6 inches, along with tilt angles of -15° to +5°.
Image: A diagram showing the TV mount's full motion flexibility, including 360° rotation of the VESA plate.
Maintenance
To ensure the longevity and proper function of your TV wall mount:
- Regularly check all screws and connections to ensure they remain tight and secure.
- Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not hang anything from the mount other than the intended television.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mount feels unstable after installation. | Loose mounting screws or incorrect wall anchors. | Re-check all wall plate screws and ensure they are tightened into a solid stud or appropriate anchors. Refer to installation steps. |
| Difficulty adjusting swivel/tilt. | Joints may be too tight or need lubrication. | Apply a small amount of silicone-based lubricant to the moving joints. Do not over-tighten joint bolts. |
| TV not level. | Wall plate installed unevenly. | Adjust the leveling screws on the VESA plate if available, or re-install the wall plate ensuring it is perfectly level. |
Specifications
- Model: PIXSF2
- Brand: Pipishell
- Material: Alloy Steel
- Color: Black
- Compatible TV Sizes: 13-26 Inches
- Maximum Load Capacity: 33 lbs (15 kg)
- VESA Compatibility: 75x75mm, 100x100mm
- Movement Type: Swivel, Rotate, Tilt, Full Motion, Articulating
- Tilt Angle: -15° to +5°
- Swivel Angle: ±90° (max, depends on TV size)
- Extension from Wall: 2.9 inches (retracted) to 10.6 inches (extended)
- Product Dimensions: 38.98 x 12.6 x 5.12 inches (mount only)
- Item Weight: 1.39 pounds
Warranty & Support
Pipishell products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Pipishell website.
For technical support, installation assistance, or any questions regarding your product, please contact Pipishell customer service:
- Email: support@pipishell.com
- Website: www.pipishell.com
You can also find additional resources and FAQs on our website.
