1. Introduction
Thank you for choosing the HOMEASY Electric Lint Remover Shaver. This device is designed to efficiently remove lint, fuzz, and pills from various fabrics, restoring their appearance. Please read this manual thoroughly before use to ensure safe and optimal operation.
2. Important Safety Information
- Keep the device out of reach of children.
- Do not use the device on wet fabrics or in wet environments.
- Ensure the mesh cover is securely attached before operation. The device is designed to stop working if the cover is loose or removed.
- Avoid pressing the shaver too hard against the fabric to prevent damage to the fabric or the device.
- Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.
- Use only the provided USB Type-C cable for charging.
- Unplug the device before cleaning or when not in use.
3. Package Contents
Verify that all items are present in the package:
- HOMEASY Electric Fabric Shaver x 1
- Replacement 6-leaf Blades x 2 (Total 3 blades including pre-installed)
- USB Type-C Charging Cable x 1
- Cleaning Brush x 1
- User Manual x 1
- Lint Roller (integrated into handle) x 1
Figure 3.1: Package Contents. This image displays all items included in the product box, ensuring you have everything needed for operation and maintenance.
4. Product Overview and Components
Familiarize yourself with the different parts of your HOMEASY Electric Lint Remover:
Figure 4.1: Front View of the Device. This image highlights the main body, LED digital display, and the shaving head with its protective mesh.
Figure 4.2: Internal Components. This diagram illustrates the detachable large mesh cover, the 6-leaf blade assembly, the internal suction mechanism, and the speed shift button.
- LED Digital Display: Shows remaining battery percentage (0-100) and current speed gear (I/II/III).
- Power/Speed Button: Turns the device on/off and cycles through speed settings.
- Large Mesh Cover: Protective cover with three sizes of holes for various lint sizes. Detachable for cleaning.
- 6-Leaf Blades: Rust-proof blades designed for efficient lint removal.
- Lint Collection Bin: Located beneath the blades, collects removed lint.
- USB Type-C Port: For charging the device.
- Integrated Lint Roller: A manual lint roller stored within the handle for quick touch-ups.
5. Setup and Charging
5.1 Initial Charge
Before first use, fully charge the device. The LED display will show the battery level.
- Connect the provided USB Type-C cable to the charging port on the device.
- Plug the other end of the USB cable into a compatible USB power source (e.g., charger, power bank, computer USB port).
- The LED display will show the charging progress. A full charge takes approximately 3 hours.
- Once fully charged, the device can operate for 3-6 hours depending on the speed setting.
Figure 5.1: USB Type-C Charging. This image demonstrates how to connect the device for charging using the USB-C cable, with the LED display indicating battery and gear status.
5.2 Blade Installation/Replacement
The device comes with blades pre-installed. If replacement is needed:
- Ensure the device is turned off and unplugged.
- Gently twist and remove the large mesh cover.
- Carefully remove the old blade assembly.
- Place a new 6-leaf blade assembly onto the spindle, ensuring it sits correctly.
- Reattach the mesh cover by aligning and twisting until secure.
6. Operating Instructions
6.1 Using the Fabric Shaver
- Place the fabric on a flat, firm surface. Smooth out any wrinkles.
- Press and hold the power button to turn on the device. The LED display will illuminate.
- Press the power button repeatedly to cycle through the three speed settings (Gear I, II, III).
- Gear I: Suitable for delicate fabrics like scarves, jumpers, and cardigans.
- Gear II: Ideal for general sweaters and medium-weight fabrics.
- Gear III: Best for heavy-duty fabrics like wool coats and furniture.
- Gently glide the shaver head over the pilled area of the fabric. Apply light, even pressure. Avoid pressing too hard.
- Move the shaver in small, circular motions or straight strokes.
- Observe the LED display for battery level. Recharge when the battery level drops below 10%.
- After use, press and hold the power button to turn off the device.
Figure 6.1: Speed Gear Recommendations. This image provides guidance on selecting the appropriate speed setting based on fabric type for optimal results.
Figure 6.2: Fabric Shaver Effectiveness. This image shows the significant improvement in fabric appearance after using the lint remover, along with examples of suitable fabric types.
6.2 Using the Integrated Lint Roller
The manual lint roller is stored in the handle for quick lint and pet hair removal.
- Gently pull the bottom cap of the handle to reveal the lint roller.
- Roll the adhesive surface over the fabric to pick up lint, dust, and pet hair.
- Tear off the used sheet when it loses its stickiness.
- Replace the lint roller into the handle after use.
Figure 6.3: 2-in-1 Design. This image illustrates the dual functionality of the device, combining an electric fabric shaver with a manual lint roller.
7. Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your device.
- Turn Off and Unplug: Always ensure the device is turned off and unplugged before cleaning.
- Remove Mesh Cover: Gently twist and remove the large mesh cover.
- Clean Blades: Use the provided cleaning brush to carefully remove lint and debris from the blades and the inner housing.
- Empty Lint Collection Bin: Open the lint collection bin and empty the accumulated fuzz. Use the cleaning brush to clear any stubborn residue.
- Clean Mesh Cover: Brush any lint from the mesh cover.
- Reassemble: Securely reattach the blades and mesh cover. Ensure the cover clicks into place to activate the safety mechanism.
- Storage: Store the device in a cool, dry place. The accessory storage bin helps prevent loss of small parts like extra blades.
Figure 7.1: Accessory Storage and Cleaning Tools. This image displays the integrated storage for accessories like extra blades and the cleaning brush, facilitating organized maintenance.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery; Mesh cover not securely attached. | Charge the device fully; Ensure the mesh cover is twisted and locked into place. |
| Reduced shaving efficiency. | Blades are dull; Lint collection bin is full; Blades or mesh cover are clogged. | Replace blades; Empty the lint collection bin; Clean blades and mesh cover thoroughly with the brush. |
| Device stops during operation. | Mesh cover became loose; Battery is critically low. | Re-secure the mesh cover; Recharge the device. |
| Fabric damage (e.g., holes). | Excessive pressure; Incorrect speed setting for fabric type; Damaged mesh cover. | Use light pressure; Select appropriate speed (Gear I for delicate fabrics); Inspect mesh cover for damage and replace if necessary. |
9. Specifications
| Brand | HOMEASY |
| Model Number | Fabric Shaver-M2 |
| Material | Acrylonitrile Butadiene Styrene, Stainless Steel |
| Color | White |
| Product Dimensions | 4.33"D x 3.54"W x 7.87"H |
| Item Weight | 14.9 ounces |
| Battery Capacity | 1800mAh (Rechargeable) |
| Charging Time | Approximately 3 hours |
| Working Time | 3-6 hours (depending on speed setting) |
| Speed Settings | 3 Gears (I/II/III) |
| Blades | 6-leaf, Rust-proof |
| Charging Port | USB Type-C |
10. Warranty and Customer Support
HOMEASY products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided on the product packaging or visit the official HOMEASY website.
Please retain your proof of purchase for warranty claims.
