Introduction
The Brinno Duo SHC1000W is a smart home security concealed peephole camera designed to enhance your door security. It provides remote access capabilities and ensures data privacy by keeping your information local. This manual provides detailed instructions for the installation, operation, and maintenance of your Brinno Duo SHC1000W.
Package Contents
Please verify that all items listed below are included in your package:
- Brinno Duo SHC1000W Main Monitor Unit
- Brinno Duo Outdoor Peephole Camera
- USB-C Power Extension Cable (9ft)
- Mounting Hardware (e.g., screws, brackets)
- User Manual (this document)
Image 1: Overview of the Brinno Duo SHC1000W system, showing the indoor monitor, outdoor peephole camera, and USB-C power cable.
Setup and Installation
Follow these steps to install your Brinno Duo SHC1000W peephole camera system.
1. Prepare Your Door
- Ensure your door thickness is between 1.1 inches (28mm) and 2.2 inches (58mm).
- The peephole diameter should be 12mm.
- Remove any existing peephole viewer from your door.
2. Install the Outdoor Peephole Camera
- Insert the outdoor peephole camera through the peephole hole from the exterior side of the door.
- Ensure the camera is oriented correctly, with the lens facing outwards and level.
Image 2: Close-up of the Brinno Duo outdoor peephole camera unit, showing the lens and sensor.
3. Mount the Indoor Monitor Unit
- From the interior side of the door, connect the cable from the outdoor camera to the designated port on the indoor monitor unit.
- Secure the indoor monitor unit to the door using the provided mounting hardware, ensuring it aligns properly with the peephole.
- The monitor unit should be flush against the door surface.
Image 3: Close-up of the Brinno Duo indoor monitor unit, displaying the screen and control buttons.
4. Power Connection
- Connect the 9ft USB-C power extension cable to the indoor monitor unit and then to a power source.
- Ensure the power connection is secure.
Image 4: The 9ft USB-C power extension cable included with the Brinno Duo SHC1000W.
5. Wi-Fi Configuration
- Follow the on-screen prompts on the indoor monitor unit to connect the device to your home Wi-Fi network.
- This step is crucial for enabling remote access and automatic alerts.
Operating Instructions
Viewing Live Feed
- Press the main button on the indoor monitor unit to activate the screen and view the live feed from the outdoor camera.
Automatic Alerts
- The Brinno Duo SHC1000W is configured to send photo notifications of door activity to your registered smartphone via email.
- Ensure your email address is correctly configured in the device settings.
- These alerts are motion-activated.
Data Privacy
- The system is designed for data privacy, meaning your data remains in your possession without reliance on third-party cloud storage or servers.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the indoor monitor screen and the outdoor camera lens. Avoid abrasive cleaners or solvents.
- Power: Ensure the USB-C power cable is securely connected and the device is receiving consistent power.
- Firmware Updates: Periodically check the Brinno website for any available firmware updates to ensure optimal performance and security.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| No image on indoor monitor | Power issue, loose cable, camera malfunction. | Check power connection. Ensure camera cable is securely connected. Restart the device. |
| No email alerts | Incorrect email settings, no Wi-Fi connection, spam filter. | Verify email address in settings. Check Wi-Fi connection status. Check your email's spam/junk folder. |
| Poor image quality | Dirty camera lens, lighting conditions. | Clean the outdoor camera lens. Ensure adequate lighting at the door. |
| Wi-Fi connection issues | Incorrect password, router too far, network interference. | Re-enter Wi-Fi password carefully. Move router closer or use a Wi-Fi extender. Reduce interference from other devices. |
Specifications
- Model: SHC1000W
- Peephole Diameter: 12mm
- Door Thickness Compatibility: 1.1" - 2.2" (28mm - 58mm)
- Connectivity: Wi-Fi (Wireless), Wired (for power)
- Controller Type: Amazon Alexa, Google Assistant (Integration capability)
- Mounting Type: Wall Mount (Peephole installation)
- Material: Gold (Peephole component)
- Focus Type: Auto Focus
- Alert Type: Motion Only (Photo notifications via email)
- International Protection Rating: IP54
- Video Capture Format: MPEG-4
- First Available: September 23, 2021
Warranty and Support
Brinno offers a 3-year product warranty for customers who register their Brinno Duo SHC1000W camera. For technical support, warranty claims, or further assistance, please contact Brinno Customer Service. Refer to the official Brinno website for contact information and detailed warranty terms.
Note: This product does not require subscriptions or hidden fees for its core functionalities.
