Beautyrest Comfort Plus Full Size Air Mattress User Manual

Introduction

The Beautyrest Comfort Plus Full Size Air Mattress is designed to provide a supportive and comfortable sleeping experience. Featuring an offset coil-in-coil design, it minimizes motion transfer and offers robust support. The mattress includes an extra plush cooling top and edge support for enhanced comfort. Its construction utilizes Polyfusion EverFirm fabric for anti-leak and stretch prevention, ensuring durability. The integrated built-in pump allows for quick inflation and deflation, making it convenient for various uses, including guest accommodations, camping, and RV travel.

Figure 1: Beautyrest Comfort Plus Full Size Air Mattress, showcasing its overall design and plush top.

Setup and Inflation

Setting up your Beautyrest Comfort Plus air mattress is straightforward thanks to its integrated Sure-Lock built-in pump. Follow these steps for optimal inflation:

1. Unpack the Mattress: Remove the air mattress from its storage/travel bag and unroll it on a clean, flat surface free of sharp objects.
2. Locate the Pump: Identify the Sure-Lock built-in express pump on the side of the mattress.
3. Connect to Power: Plug the pump's power cord into a standard electrical outlet.
4. Inflate: Turn the pump dial to the "Inflate" position. The high-speed inset pump will begin to inflate the mattress rapidly. The Sure-Lock system is designed to provide maximum firmness and prevent over-inflation by automatically shutting off when the desired firmness is reached.
5. Adjust Firmness: For personalized comfort, you can stop the inflation at any point by turning the dial to "Off". If you desire a firmer mattress, allow the pump to continue until it automatically stops.
6. Secure the Cord: Once inflated, unplug the pump and store the power cord securely in its designated storage compartment.

Figure 2: Close-up view of the Sure-Lock built-in pump, showing the inflate, off, and deflate settings.

For deflation, simply turn the pump dial to the "Deflate" position. The pump will quickly remove air from the mattress, allowing for easy packing and storage.

Operating and Comfort Features

The Beautyrest Comfort Plus air mattress is engineered for superior comfort and stability, ensuring a restful night's sleep.

• Offset Coil-in-Coil Design: This unique construction creates a stronger, more resilient mattress that significantly reduces motion transfer. This means less disturbance from a partner's movements, promoting uninterrupted sleep.
• Plush Cooling Vent Topper: The mattress features an extra plush top with a cooling vent, designed to regulate temperature and keep you comfortable throughout the night.
• Edge Support: Enhanced support and durability around the edges prevent roll-offs and provide a stable sleeping surface across the entire mattress.
• Polyfusion EverFirm Fabric: This advanced material prevents stretching and air loss, maintaining firmness and stability over time.

Figure 3: Illustration of the mattress's superior stability and protective edge support, highlighting the internal coil structure.

Figure 4: Depiction of the Cool-Vent plush fabric topper, illustrating its cooling properties and vinyl fabric composition.

Maintenance and Care

Proper care will extend the life of your Beautyrest Comfort Plus air mattress:

• Cleaning: The mattress is made of durable vinyl fabric, which is waterproof and easy to clean. For spills or dirt, wipe the surface with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners.
• Storage: Ensure the mattress is completely deflated and dry before folding and placing it back into the convenient storage/travel bag. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Protection: While the mattress is puncture-resistant, avoid placing it on rough or uneven surfaces. Keep sharp objects away from the mattress to prevent damage.
• Initial Stretch: It is normal for air mattresses to stretch slightly during the first few uses, which may cause a slight decrease in firmness. Simply add more air to restore the desired firmness.

Troubleshooting

If you encounter issues with your Beautyrest Comfort Plus air mattress, consider the following common solutions:

• Air Loss:
  • Initial Stretching: As mentioned in maintenance, new vinyl can stretch. Re-inflate the mattress after the first few uses to achieve consistent firmness.
  • Valve Seal: Ensure the Sure-Lock pump dial is fully in the "Off" position and the power cord compartment is securely closed to prevent air leakage through the valve.
  • Punctures: Inspect the mattress surface for any small holes or punctures. Even small holes can lead to significant air loss over time. If a puncture is found, use a standard air mattress patch kit to repair it.
  • Seam Leaks: Rarely, a leak might occur along a seam. These are harder to detect and repair. If you suspect a seam leak and cannot locate it, contact customer support.
• Pump Not Working:
  • Power Connection: Verify that the power cord is securely plugged into a working electrical outlet.
  • Overheating: The pump may have an internal thermal cut-off if it overheats from continuous use. Unplug the pump and allow it to cool down for 30 minutes before attempting to use it again.

Specifications

Warranty and Support

The Beautyrest Comfort Plus Air Mattress is designed and engineered in the United States and is backed by a one-year warranty. For detailed information regarding warranty claims, returns, or product support, please refer to the official Beautyrest website or the documentation included with your purchase.

An official User Guide in PDF format is available for download: Download User Guide (PDF).

For further assistance, you may visit the official Beautyrest Store on Amazon: Beautyrest Store.