RCF Art 910A Powered Speaker User Manual

1. Introduction and Overview

The RCF ART 910A is a high-performance 10-inch powered speaker designed for professional audio applications. It is part of RCF's ART 9 Series, known for its versatility, power, and efficiency. This manual provides essential information for the safe and effective operation of your ART 910A speaker.

Key features of the ART 910A include:

• 2,100W Bi-Amplified Design: Delivers robust sound pressure levels up to 130dB SPL.
• 10-inch Woofer and 1.75-inch Compression Driver: Optimized for clear and powerful audio reproduction.
• True Resistive Waveguide: Ensures balanced and even sound coverage.
• Bass Motion Control (BMC): Advanced woofer excursion management for extended bass response.
• FiRPHASE Technology: Proprietary FIR filtering for coherent sound distribution without phase distortions.
• Durable Construction: Heavy-duty polypropylene composite cabinet with M-brace internal reinforcement for road-worthiness and permanent installation.

Figure 1: Front view of the RCF Art 910A Powered Speaker. This image shows the speaker's black polypropylene cabinet and the perforated metal grille protecting the drivers. The RCF logo is visible at the bottom center of the grille.

2. Safety Information

Please read all safety instructions before operating the RCF ART 910A speaker. Retain this manual for future reference.

• Power Source: Connect the speaker only to a power supply of the type described in this manual or marked on the unit.
• Ventilation: Ensure proper ventilation. Do not block ventilation openings.
• Water and Moisture: Do not expose the speaker to rain or moisture. Do not place objects filled with liquids on the speaker.
• Heat: Do not place the speaker near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Cleaning: Clean only with a dry cloth.
• Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
• Mounting: If mounting the speaker, ensure it is securely installed by qualified personnel using appropriate hardware.

3. Setup

Follow these steps to set up your RCF ART 910A powered speaker:

1. Unpacking: Carefully remove the speaker from its packaging. Inspect for any signs of damage during transit. Report any damage to your dealer immediately.
2. Placement:
   • Place the speaker on a stable, flat surface or mount it securely on a speaker stand or wall bracket. Ensure the stand/bracket can support the speaker's weight (approximately 34.8 lbs / 15.8 kg).
   • For optimal sound dispersion, position the speaker to cover your intended audience area.
3. Power Connection:
   • Ensure the speaker's power switch is in the "OFF" position.
   • Connect the provided power cord to the AC inlet on the rear panel of the speaker.
   • Plug the other end of the power cord into a grounded electrical outlet.
4. Audio Input Connection:
   • Connect your audio source (mixer, microphone, instrument, etc.) to the input connectors on the rear panel. The ART 910A typically features XLR and TRS inputs.
   • Use high-quality balanced cables for best performance and to minimize noise.
5. Initial Settings:
   • Set the main volume control on the speaker to its minimum position before powering on.
   • If available, set any input sensitivity switches (e.g., Mic/Line) according to your source.

4. Operating Instructions

Once the speaker is set up, follow these steps for operation:

1. Powering On:
   • Ensure all connections are secure and the speaker's volume is at minimum.
   • Power on your audio source (mixer, etc.) first.
   • Flip the power switch on the RCF ART 910A to the "ON" position. The power indicator LED should illuminate.
2. Adjusting Volume:
   • Slowly increase the volume control on the speaker to the desired listening level.
   • Adjust the output level from your audio source as needed.
   • Avoid setting the volume too high, which can lead to distortion and potential damage to the speaker or your hearing.
3. Using DSP Features (Bass Motion Control & FiRPHASE):
   • The ART 910A incorporates advanced DSP features like Bass Motion Control (BMC) and FiRPHASE technology. These are typically active by default to optimize sound performance.
   • BMC manages the woofer's excursion to provide a deeper and more controlled bass response without over-excursion.
   • FiRPHASE technology optimizes the speaker's phase response, ensuring a coherent and clear sound image across the frequency spectrum.
   • Refer to the full RCF manual (usually available on the manufacturer's website) for detailed information on any user-adjustable DSP presets or settings, if applicable to your specific model.
4. Powering Off:
   • Decrease the speaker's volume to minimum.
   • Flip the power switch on the RCF ART 910A to the "OFF" position.
   • Power off your audio source.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your RCF ART 910A speaker.

• Cleaning:
  • Always disconnect the speaker from the power outlet before cleaning.
  • Use a soft, dry cloth to wipe down the exterior of the speaker.
  • Do not use abrasive cleaners, waxes, or solvents, as they may damage the finish.
  • For the grille, a soft brush or vacuum cleaner with a brush attachment can be used to remove dust.
• Storage:
  • When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
  • If possible, use the original packaging or a protective cover to prevent dust accumulation and physical damage.
• Inspection:
  • Periodically check power cables and audio cables for any signs of wear or damage. Replace damaged cables immediately.
  • Ensure all connectors are clean and free of corrosion.

6. Troubleshooting

If you encounter issues with your RCF ART 910A speaker, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact RCF customer support or a qualified service technician.

7. Specifications

Detailed technical specifications for the RCF ART 910A Powered Speaker:

8. Warranty and Support

RCF products are manufactured to the highest quality standards. For specific warranty information regarding your ART 910A speaker, please refer to the warranty card included with your product or visit the official RCF website.

For technical support, service, or inquiries about spare parts, please contact RCF customer service or your authorized RCF dealer. You can typically find contact information on the RCF official website:

Visit RCF Official Website

When contacting support, please have your product model (ART910-A) and serial number ready.