Heiniger Opal Clipper 7.2V/35W User Manual

1. Introduction

The Heiniger Opal Clipper is a high-performance, cordless animal clipper designed for professional use. It is suitable for clipping dogs, horses, cows, and for various veterinary applications. Featuring advanced lithium-ion battery technology and two speed settings, the Opal Clipper provides efficient and precise grooming.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Heiniger Opal Clipper. Please read it thoroughly before first use and keep it for future reference.

2. Safety Instructions

• Always ensure the clipper is switched off before attaching or detaching blades, cleaning, or performing any maintenance.
• Keep the clipper and charging station away from water or other liquids. Do not operate with wet hands.
• Use only the original charging station and power adapter supplied with the clipper.
• Do not attempt to disassemble or repair the clipper or battery pack yourself. Contact authorized service personnel for repairs.
• Keep blades sharp and well-oiled to prevent pulling hair and ensure smooth operation. Dull blades can cause discomfort to the animal.
• Store the clipper and accessories in a dry, safe place, out of reach of children and animals.
• Ensure proper ventilation during charging to prevent overheating.
• Do not use the clipper on animals with open wounds or skin irritations.

3. Package Contents

Verify that all items listed below are included in your package:

• 1 x Heiniger Opal Clipper
• 1 x Heiniger #10 Blade (1.5mm)
• 1 x Charging Station with Power Adapter
• 2 x Li-ion Batteries
• 1 x Heiniger Lubricating Oil
• 1 x Cleaning Brush
• 1 x User Manual

4. Product Overview

The Heiniger Opal Clipper is designed for ergonomic handling and powerful performance. Key components include the clipper body, blade system, power switch, and battery with charge indicator.

Figure 4.1: Main view of the Heiniger Opal Clipper, showcasing its ergonomic design and blue casing.

Figure 4.2: Front view of the clipper, highlighting the power switch and Heiniger branding.

Figure 4.3: Side view of the clipper, illustrating its sleek profile and comfortable grip.

Figure 4.4: Close-up of the #10 blade, showing the 1.5mm cutting length and Heiniger engraving.

Figure 4.5: The Heiniger Opal Clipper securely placed in its charging station.

Figure 4.6: Detailed view of the #10 blade, emphasizing its carbon steel construction.

Figure 4.7: The Li-ion battery pack, featuring an integrated charge level indicator.

Figure 4.8: The charging station for the Heiniger Opal Clipper batteries.

Figure 4.9: The Heiniger Opal Clipper being used for detailed clipping on a horse.

5. Setup

5.1 Charging the Battery

1. Connect the power adapter to the charging station and plug it into a suitable power outlet.
2. Place a Li-ion battery into the charging station. The charge level indicator on the battery will show its status.
3. A full charge takes approximately 60 minutes. The indicator will show full charge when complete.
4. The clipper comes with two batteries, allowing for extended operation.

5.2 Attaching and Detaching the Blade

The Heiniger Opal Clipper uses an A5 snap-on blade system.

1. To Attach: Ensure the clipper is switched off. Align the blade with the clipper head and press firmly until it snaps into place.
2. To Detach: Ensure the clipper is switched off. Locate the blade release lever (if present, typically on the back of the clipper head) and push it to release the blade. Carefully remove the blade.

5.3 Lubricating the Blade

Before each use, apply a few drops of the supplied Heiniger lubricating oil to the teeth and friction surfaces of the blade. This reduces heat, wear, and ensures optimal cutting performance.

6. Operating Instructions

6.1 Powering On/Off and Speed Settings

1. Insert a charged battery into the clipper handle.
2. Locate the power switch on the clipper body.
3. Slide the switch to position 1 for the first speed setting (approx. 2600 double strokes/min).
4. Slide the switch further to position 2 for the second speed setting (approx. 3100 double strokes/min). This setting is recommended for thick or dirty coats.
5. To turn off the clipper, slide the switch back to the '0' position.

6.2 Clipping Technique

• Ensure the animal's coat is clean and dry before clipping for best results and to prolong blade life.
• Hold the clipper firmly and move it against the direction of hair growth.
• Use smooth, even strokes. Avoid pressing too hard, as this can cause irritation or uneven clipping.
• Regularly check the blade temperature. If it becomes too hot, switch to a cool blade or allow it to cool down to prevent skin burns.
• For detailed work or sensitive areas, use caution and a slower speed setting if appropriate.

7. Maintenance

7.1 Cleaning the Blade

1. After each use, switch off the clipper and detach the blade.
2. Use the supplied cleaning brush to remove all hair and debris from the blade and the clipper head.
3. For thorough cleaning, blades can be cleaned with a specialized blade cleaner or disinfectant spray. Ensure blades are completely dry before re-oiling and storage.

7.2 Lubrication

Regular lubrication is crucial for the longevity and performance of your clipper. Apply Heiniger lubricating oil to the blade before, during (if clipping for extended periods), and after each use.

7.3 Battery Care and Storage

• Store batteries in a cool, dry place.
• Avoid fully discharging the batteries frequently. Recharge them when the indicator shows low charge.
• If storing for an extended period, charge batteries to approximately 50% capacity.
• Do not expose batteries to extreme temperatures or direct sunlight.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact your authorized Heiniger dealer or service center. Keep your proof of purchase for warranty claims.