1. Product Overview
This manual provides instructions for the Sensea EASY single ceramic washbasin, designed for bathroom use. This washbasin features a practical right-side shelf for daily essentials and is made from white ceramic for easy cleaning. It is compatible with the Sensea EASY range of bathroom furniture.
Image 1.1: Sensea EASY Single Ceramic Washbasin. Note: Faucet and drain are not included. The washbasin weighs approximately 12 kg.
2. Setup and Installation
The Sensea EASY washbasin is designed for straightforward installation. Ensure you have all necessary plumbing components, including a suitable faucet, drain, and siphon, before beginning.
2.1 Key Features for Installation
- Integrated Overflow: The washbasin includes an integrated overflow system to prevent water from spilling over the edges.
- Drain Compatibility: A sliding and clickable drain can be installed. For optimal use, combine with a space-saving siphon.
2.2 Dimensions
Refer to the diagram below for precise measurements to ensure proper fit and installation with your chosen bathroom furniture.
Image 2.1: Technical dimensions of the Sensea EASY washbasin. Width: 51.4 cm, Depth: 42.4 cm, Bowl depth: 15.5 cm, Edge height: 6 cm.
2.3 Installation Steps (General Guidelines)
- Prepare the Area: Ensure the installation area is clean, level, and has appropriate water supply and drainage connections.
- Mount the Cabinet (if applicable): If installing on a cabinet, ensure the cabinet is securely mounted and level according to its own instructions.
- Position the Washbasin: Carefully place the washbasin onto the cabinet or mounting brackets.
- Install Faucet and Drain: Install the faucet and drain assembly according to their respective manufacturer's instructions. Connect the siphon to the drain.
- Connect Water Supply: Connect the hot and cold water supply lines to the faucet.
- Seal Edges: Apply a waterproof sealant (e.g., silicone) around the edges where the washbasin meets the wall or cabinet to prevent water ingress.
- Test for Leaks: Turn on the water supply and check all connections for leaks.
3. Operating (Usage)
The Sensea EASY washbasin is designed for daily use in your bathroom. Its practical design includes a right-side shelf, providing convenient space for toiletries and other items.
Image 3.1: The washbasin installed, demonstrating the practical shelf space for daily items.
3.1 Compatibility with EASY Range
This washbasin is part of the Sensea EASY range and is compatible with other EASY bathroom furniture, such as cabinets of the same width, allowing for a cohesive bathroom design.
Image 3.2: Example of the washbasin combined with a compatible Sensea EASY cabinet.
4. Maintenance
Regular cleaning and proper care will ensure the longevity and appearance of your ceramic washbasin.
4.1 Cleaning Instructions
- Daily Cleaning: Use a soft cloth or sponge with mild soap and water to clean the surface. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Avoid Abrasives: Do not use abrasive cleaners, scouring pads, or harsh chemicals (e.g., strong acids, bleach, ammonia-based cleaners) as these can damage the ceramic glaze.
- Stain Removal: For stubborn stains, a non-abrasive ceramic cleaner can be used. Always test on an inconspicuous area first.
- Overflow Maintenance: Periodically clean the overflow channel to prevent buildup.
5. Troubleshooting
This section addresses common issues you might encounter with your washbasin.
5.1 Common Issues and Solutions
- Slow Drainage:
- Check if the drain stopper is fully open.
- Remove and clean the drain stopper and any visible debris in the drain opening.
- If the issue persists, the siphon may be clogged. Disassemble and clean the siphon according to its manufacturer's instructions.
- Leaks Around Connections:
- Tighten all plumbing connections (faucet, drain, siphon) carefully. Do not overtighten.
- Check for damaged washers or seals and replace if necessary.
- Ensure sealant around the washbasin edges is intact. Reapply if cracked or missing.
- Water Spots/Mineral Buildup:
- Regularly dry the washbasin after use.
- Use a solution of white vinegar and water (1:1 ratio) to gently remove mineral deposits. Rinse thoroughly.
If you encounter issues not listed here or if solutions do not resolve the problem, please contact customer support.
6. Specifications
| Brand | Sensea |
| Model Number | 3276007141863 |
| Product Dimensions | 42 x 51 x 16 cm (Depth x Width x Height) |
| Item Weight | 900 g (Note: Product image indicates approx. 12 kg, please verify actual weight upon receipt) |
| Material | Ceramic |
| Color | White |
| Size | Single Washbasin |
| Style | European |
| Shape | Rectangular |
| ASIN | B09GVQJQSD |
| First Available | September 24, 2021 |
7. Warranty Information
Specific warranty details for the Sensea EASY Single Ceramic Washbasin are typically provided with the product packaging or can be found on the manufacturer's official website. Please retain your proof of purchase for any warranty claims.
General return policy information from the retailer indicates a 30-day duration for refund/replacement. For detailed warranty terms, refer to the documentation included with your purchase or contact Sensea customer service.
8. Customer Support
For further assistance, technical support, or inquiries regarding your Sensea EASY Single Ceramic Washbasin, please contact:
- Manufacturer: Sensea
- Retailer: Refer to your purchase receipt or the retailer's website for specific contact information.
When contacting support, please have your product model number (3276007141863) and ASIN (B09GVQJQSD) readily available.
