Introduction
Thank you for choosing the Lynnoland T3476 Touch Table Lamps. This manual provides essential information for the safe and efficient use of your new lamps. Please read these instructions carefully before assembly and operation, and retain them for future reference.
Product Features
- 3-Way Dimmable Touch Control: Easily adjust brightness (Low, Medium, High, Off) by tapping any metal part of the lamp base.
- Integrated Charging Ports: Features two 5V/2.1A USB ports and one 2-prong AC outlet on the base for convenient device charging.
- Eye-Caring Design: Equipped with a natural fabric lampshade to minimize direct eye contact and reduce strain.
- Stable Construction: Weighted base with a non-slip mat ensures stability and prevents accidental tipping.
- Energy-Efficient LED Bulbs: Includes two T45 LED bulbs (6W, 60W equivalent, 800 lumens, 5000K daylight) with a 25,000+ hour lifetime.
- Modern & Minimalist Style: Designed to complement various room decors, suitable for bedrooms, living rooms, nurseries, and offices.
What's Included
Your Lynnoland T3476 lamp set includes the following components:
- 2 x Lamp Bases with USB Ports & AC Outlet
- 2 x Lamp Shades (White Fabric)
- 2 x T45 LED Bulbs (5000K Daylight)
- User Manual (this document)
Setup Instructions
Follow these steps to assemble your Lynnoland Touch Table Lamp:
- Unpack Components: Carefully remove all parts from the packaging. Ensure all components listed in "What's Included" are present and undamaged.
Image: All components of the Lynnoland Touch Table Lamp set. - Attach Lamp Shade: Place the fabric lampshade onto the lamp base. Secure it by screwing the retaining ring (usually located on the lamp holder) over the shade and onto the lamp holder until snug.
Image: An assembled Lynnoland Touch Table Lamp. - Install LED Bulb: Screw the provided T45 LED bulb into the E26 bulb base. Do not overtighten.
Image: The included T45 LED bulb, designed for optimal light distribution. - Connect to Power: Plug the lamp's power cord into a standard 120V AC wall outlet.
Operating Instructions
Touch Control & 3-Way Dimming
The Lynnoland Touch Table Lamp features a convenient touch-sensitive base for easy operation:
- To Turn On/Adjust Brightness: Simply tap any metal part of the lamp base.
- The first tap will turn the lamp on to the Low brightness setting.
- The second tap will switch to the Medium brightness setting.
- The third tap will activate the High brightness setting.
- The fourth tap will turn the lamp Off.
Using USB Charging Ports & AC Outlet
The lamp base includes built-in charging capabilities for your electronic devices:
- USB Ports: Locate the two 5V/2.1A USB ports on the side of the lamp base. Plug your USB charging cables directly into these ports to charge smartphones, tablets, and other USB-powered devices.
- AC Outlet: A 2-prong AC outlet is also available on the lamp base. This allows you to plug in small appliances or chargers, freeing up your wall outlets.
Note: The charging ports function independently of the lamp's light. You can charge devices even when the lamp is off, as long as the lamp is plugged into a wall outlet.
Maintenance
- Cleaning: Disconnect the lamp from the power source before cleaning. Wipe the metal base with a soft, dry cloth. For the fabric lampshade, use a lint roller or a soft brush to remove dust. Do not use liquid cleaners or abrasive materials.
- Bulb Replacement: Ensure the lamp is unplugged before replacing the bulb. Allow the bulb to cool completely. Unscrew the old bulb and replace it with a new E26 base LED bulb (max 60W equivalent).
- General Care: Avoid placing the lamp in direct sunlight or near heat sources. Keep away from water and high humidity environments as the lamp is not waterproof.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Not plugged in; loose bulb; faulty bulb; power outage. | Ensure power cord is securely plugged into a working outlet. Tighten or replace the bulb. Check your home's circuit breaker. |
| Touch control is unresponsive. | Loose connection; incompatible bulb; electrical interference. | Ensure the bulb is fully screwed in. Use only dimmable LED bulbs. Try plugging the lamp into a different outlet. |
| USB ports or AC outlet not working. | Lamp not plugged in; device cable faulty; device requires more power. | Confirm the lamp is plugged into a live wall outlet. Try a different charging cable or device. Ensure the device's power requirements do not exceed the port's output. |
| Light flickers or dims unexpectedly. | Loose bulb; unstable power supply; incompatible dimmer. | Tighten the bulb. Ensure the wall outlet provides stable power. Use only the integrated touch dimmer. |
Specifications
- Model Number: T3476
- Brand: Lynnoland
- Dimensions (D x W x H): 5.9" x 5.9" x 17.5"
- Item Weight: 1.7 Kilograms
- Material: Metal (Brushed Nickel Base), Fabric (Shade)
- Input Voltage: 120 Volts
- Light Source Type: LED
- Bulb Base: E26
- Included Bulb: T45 LED, 6W (60W Equivalent), 800 Lumens, 5000K Daylight
- Control Method: Touch (3-Way Dimmable)
- Connectivity: 2 x 5V/2.1A USB Ports, 1 x 2-Prong AC Outlet
- Power Source: Corded Electric
- Indoor/Outdoor Usage: Indoor Only
- Water Resistance: Not Waterproof
Warranty & Support
Lynnoland offers a 36-month warranty on this product. If your lamp has any defect or stops working within 3 years, please contact us for troubleshooting or a replacement.
For any issues or questions, please contact Lynnoland customer support via Amazon message box. We aim to reply within 24 hours.
Contact Information:
- Manufacturer: Lynnoland
- Amazon Store: Visit the Lynnoland Store
Official Product Video
Video: An official overview of the Lynnoland Set of 2 Touch Table Lamps, highlighting key features and design.