Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your SMALLRIG ZV-E10 Camera Cage with Silicone Handle. Designed specifically for the Sony ZV-E10 camera, this cage enhances protection, improves ergonomics, and expands mounting possibilities for various accessories.
Setup and Installation
Follow these steps to correctly install the SMALLRIG ZV-E10 Camera Cage onto your Sony ZV-E10 camera.
Package Contents
- 1 x ZV-E10 Camera Cage
- 1 x Side Lock
- 1 x M2.5 Screw
- 2 x Allen Wrenches
Figure 1: Package Contents and Dimensions
Attaching the Camera Cage
- Ensure your Sony ZV-E10 camera is powered off.
- Align the camera with the cage, ensuring the 1/4"-20 screw hole on the bottom of the camera matches the screw hole on the cage's base.
- Secure the camera to the cage using the provided 1/4"-20 screw and one of the Allen wrenches. Tighten firmly but do not overtighten.
- For additional security, attach the side lock to the camera's strap lug and secure it to the cage using the M2.5 screw and the smaller Allen wrench. This double-locking design prevents twisting.
Figure 2: Installed Camera Cage
Figure 3: Compatibility with Sony ZV-E10
Key Features
The SMALLRIG ZV-E10 Camera Cage offers several design advantages for enhanced camera use:
- Enlarged Hot Shoe Space: The design provides ample clearance around the camera's hot shoe, allowing simultaneous use of external microphones (e.g., Sony ECM-W2BT) or flashes (e.g., Sony HVL-F32M) without obstruction.
- Enlarged Battery Compartment Space: The bottom of the cage features an enlarged cutout for the battery compartment, facilitating easy access for battery and memory card changes. A dedicated slot is included for dummy battery cables, allowing the camera to sit flat during external power use.
- Multiple Mounting Options: The cage integrates various mounting points, including multiple 1/4"-20 threaded holes, 3/8"-16 ARRI-style locating holes, and built-in cold shoes (top and bottom). These allow for attachment of top handles, power bank clips, microphones, and LED video lights.
- Silicone Handle with Comfortable Grip: An ergonomically designed, detachable silicone handle provides a secure and comfortable grip, improving handling during extended use.
- Arca-Swiss Quick Release Plate: The integrated Arca-Swiss compatible quick release plate on the bottom allows for rapid transitions between handheld, tripod, and stabilizer setups. It also features threaded holes for direct attachment to RS 3/RS 3 Pro/RS 2/RSC 2 stabilizer quick release plates.
- Dedicated Protection: Constructed from aircraft-grade aluminum alloy, the formfitting cage provides robust protection for your camera. Built-in rubber pads prevent scratches and ensure a snug fit.
- Full Access: The cage's design ensures full access to all camera buttons, card slots, battery compartments, and allows for 360-degree rotation of the flip screen.
Figure 4: Product Details and Features
Figure 5: Easy Battery and Memory Card Access
Figure 6: Dummy Battery Cable Slot
Figure 7: Unrestricted Flip Screen Access
Operating Instructions
The SMALLRIG ZV-E10 Camera Cage is designed to integrate seamlessly with your camera, providing a versatile platform for various shooting scenarios.
Utilizing Mounting Points
- Top Handle: Attach a SMALLRIG Top Handle (e.g., 1638, 1446, 1984, 2165) to the 1/4"-20 or 3/8"-16 ARRI locating holes for improved low-angle shooting and carrying.
- Power Bank: Use a SMALLRIG Power Bank Clip (BUB2336) to secure a power bank to the cage, ensuring continuous power supply for extended shoots.
- Microphone/LED Light: Mount a microphone (e.g., SMALLRIG 3468) or an LED video light (e.g., SMALLRIG 3286) to the built-in cold shoes for enhanced audio and lighting in vlogging setups.
Switching Shooting Modes
The integrated Arca-Swiss quick release plate allows for quick transitions between different shooting configurations:
- Handheld: The silicone grip provides a comfortable and secure hold for stable handheld shooting.
- Tripod: Directly attach the cage to an Arca-Swiss compatible tripod for stable static shots or vertical/horizontal orientations.
- Stabilizer: The bottom threaded holes are compatible with quick release plates for DJI RS 3/RS 3 Pro/RS 2/RSC 2 stabilizers, optimizing your setup for smooth, cinematic footage.
Figure 8: Tripod Shooting Accessory System
Figure 9: Versatile Accessory Systems
Maintenance
To ensure the longevity and optimal performance of your SMALLRIG ZV-E10 Camera Cage, follow these maintenance guidelines:
- Cleaning: Wipe the cage regularly with a soft, dry cloth to remove dust and fingerprints. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
- Inspection: Periodically check all screws and mounting points for tightness. Re-tighten if necessary using the provided Allen wrenches.
- Storage: When not in use, store the cage in a clean, dry environment, away from extreme temperatures and humidity.
Troubleshooting
While the SMALLRIG ZV-E10 Camera Cage is designed for optimal functionality, some minor considerations may arise:
- Shutter Button Access: Some users with larger fingers may find the shutter button slightly less accessible due to the cage's form-fitting design. This is generally a minor inconvenience and does not impede camera operation.
- Camera Strap Compatibility: The cage's strap holes may be narrower than some standard camera straps. If your existing strap is too wide, a narrower strap may be required. The cage covers one of the camera's original strap mounts, so only the cage's strap mounts can be used.
- Accessory Interference: While the hot shoe space is enlarged, certain oversized accessories might still interfere with other cage features or camera controls. Always test accessory fit before critical use.
- Cage Fitment: Ensure you have the correct cage model for your camera. This cage (Model 3538-SR) is specifically designed for the Sony ZV-E10. Using an incorrect model may result in gaps or improper fit.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 3538-SR |
| Compatibility | Sony ZV-E10 |
| Material | Aluminum Alloy, Stainless Steel, Silica Gel |
| Product Dimensions | 5.07 x 2.37 x 3.25 inches (128.9 x 60.2 x 82.8 mm) |
| Item Weight | 2.65 ounces (75 grams) |
| Color | Black |
| Mounting Points | 1/4"-20 Threaded Holes, 3/8"-16 ARRI Locating Holes, Cold Shoe Mounts, NATO Rail |
| Quick Release | Arca-Swiss Type |
Warranty Information
SMALLRIG products are manufactured to high-quality standards. For specific warranty details and terms, please refer to the official SMALLRIG website or contact customer support. Please retain your proof of purchase for any warranty claims.
Customer Support
For further assistance, technical support, or inquiries regarding your SMALLRIG ZV-E10 Camera Cage, please visit the official SMALLRIG brand store or contact their customer service department.
Official SMALLRIG Brand Store: Visit Store
Sustainability
This product is recognized as a Climate Pledge Friendly item, reflecting its sustainable and carbon-friendly attributes. Every purchase supports international carbon offset projects.
Figure 10: Climate Pledge Friendly Certification
Learn more about the Climate Pledge Friendly initiative: climate-id.com/R3UHE5
