1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your DL-pro 300ml plastic replacement bottle. This bottle is designed for use with Blanco Torre and Tango built-in dish soap dispensers manufactured from 2016 onwards. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.
2. Product Overview
The DL-pro 300ml plastic bottle is a high-quality replacement component for specific Blanco dish soap dispensers. It is constructed from durable plastic and features an external thread for secure attachment to the pump head.
- Capacity: 300 ml
- Compatibility: Designed for Blanco Torre and Tango dish soap dispensers (models from 2016 onwards).
- Thread Type: External 20 mm thread for pump head attachment.
- Material: Plastic, free from BPA, phthalates, and lead.
Figure 2.1: DL-pro 300ml Plastic Bottle. This image shows the transparent plastic bottle with its threaded neck, ready for attachment to a dispenser pump head.
Figure 2.2: DL-pro 300ml Plastic Bottle shown with a compatible pump head (pump head not included). This illustrates how the bottle connects to the dispenser mechanism.
3. Setup and Installation
This section guides you through the process of replacing your existing dispenser bottle with the new DL-pro 300ml plastic bottle.
- Preparation: Ensure the area around your sink dispenser is clean and dry. If replacing an existing bottle, ensure the dispenser is empty and remove the old bottle by unscrewing it from the pump head.
- Filling the Bottle: Fill the new DL-pro bottle with your preferred liquid soap or detergent. Do not overfill; leave a small air gap at the top.
- Attaching the Pump Head: Carefully align the external thread of the DL-pro bottle with the internal thread of your Blanco dispenser's pump head. Screw the bottle onto the pump head clockwise until it is hand-tight. Avoid overtightening, as this can damage the threads.
- Testing: Once attached, pump the dispenser a few times to prime it and ensure the liquid soap is dispensed correctly. Check for any leaks around the connection point.
Note: The pump head itself is not included with this replacement bottle and must be purchased separately or reused from your existing dispenser.
4. Operation
The DL-pro 300ml plastic bottle functions as the reservoir for your liquid soap or detergent within your compatible Blanco dispenser. Once installed, operate your dispenser as usual by pressing the pump head to dispense the liquid.
- Refilling: When the bottle is empty, unscrew it from the pump head, refill with liquid, and reattach as described in the "Setup and Installation" section.
- Compatibility: Ensure you use liquids suitable for soap dispensers. Thick liquids may require dilution.
5. Maintenance and Care
Regular cleaning and proper care will extend the life of your DL-pro plastic bottle.
- Cleaning: Periodically rinse the bottle with warm water to remove any residue. For a more thorough cleaning, use a mild dish soap and a bottle brush. Ensure it is completely dry before refilling.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or strong chemical solutions, as these can damage the plastic.
- Temperature: Avoid exposing the bottle to extreme temperatures, both hot and cold, as this can affect the plastic's integrity.
6. Troubleshooting
If you encounter issues with your DL-pro plastic bottle, refer to the following common solutions:
- Leakage at Connection:
- Ensure the bottle is screwed on tightly to the pump head, but do not overtighten.
- Check if the threads on both the bottle and the pump head are clean and undamaged.
- Bottle Not Fitting:
- Verify that your dispenser is a Blanco Torre or Tango model from 2016 onwards. This bottle is specifically designed for these models.
- Inspect the threads for any obstructions or damage.
7. Specifications
| Model Number: | 122237 |
| Brand: | DL-pro |
| Capacity: | 300 ml |
| Length: | Approximately 165 mm |
| Thread Size: | 20 mm external thread |
| Material: | Plastic (BPA-free, Phthalate-free, Lead-free) |
| Shape: | Round |
| Package Dimensions: | 20.9 x 12.1 x 7.2 cm |
| Weight: | 30 grams |
8. Support
If you have any questions regarding the compatibility or use of this DL-pro plastic bottle, please do not hesitate to contact our customer service. Our knowledgeable team is available to assist you.
For further assistance, please refer to the contact information provided by your retailer or visit the official DL-pro website.