ECONTROLLY RC-682M Remote Control User Manual

Introduction

This manual provides instructions for the ECONTROLLY RC-682M replacement remote control. This remote is designed to function with various Onkyo A/V Receiver models, including RC-681M, TX-SA8560, TX-SR707, TX-SR503, TX-SR605, RC-606S, HT-R340, HT-R530, HT-R540, HT-R550, HT-SR600, and HT-SR800. No programming is required; simply install batteries to begin operation.

Product Overview

Image: The ECONTROLLY RC-682M remote control, featuring a dark gray body with various control buttons. Key sections include power, input selection, navigation, volume, channel, and media playback controls. The model number RC-682M is visible at the bottom.

Setup

Battery Installation

The RC-682M remote control requires two (2) AAA alkaline batteries for operation. Follow these steps to install the batteries:

1. Locate the battery compartment cover on the back of the remote control.
2. Press down on the tab and slide the cover off.
3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Slide the battery compartment cover back into place until it clicks securely.

No additional programming is required. The remote is ready for use once batteries are installed.

Operating the Remote Control

The RC-682M remote control provides full functionality for your compatible Onkyo A/V Receiver. Below is a guide to its primary functions:

• STANDBY/ON (Yellow Button): Powers the A/V receiver on or off.
• TEST TONE: Activates a test tone for speaker setup.
• CH SEL: Selects channels.
• L NIGHT: Activates or deactivates the Late Night listening mode.
• GINE FLTR: Likely controls a filter function (e.g., noise reduction).
• MUTING: Mutes or unmutes the audio output.
• Navigation Buttons (Up, Down, Left, Right, ENTER): Used for menu navigation and selection.
• SETUP: Accesses the receiver's setup menu.
• RETURN: Returns to the previous menu or screen.
• CH (Channel Up/Down): Changes channels.
• VOL (Volume Up/Down): Adjusts the master volume level.
• INPUT SELECTOR (Numbered Buttons 1-9, +10, 0, CLR): Directly selects various input sources such as VCR/DVR, CBL/SAT, GAME/TV, AUX, MULTI CH, DVD, TAPE, TUNER, and CD. Use +10 for inputs 10-12, and CLR to clear entries.
• Media Playback Controls (Play, Pause, Stop, Fast Forward, Rewind, Skip): Controls playback for connected media devices.
• DISPLAY: Toggles display information on the receiver or connected display.
• LEVEL+ / LEVEL-: Adjusts individual channel levels or other specific audio parameters.
• STEREO / SURROUND: Switches between stereo and various surround sound modes.

Maintenance

Battery Replacement

Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.

Cleaning

To clean the remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild cleaning solution, then wipe dry immediately. Avoid using abrasive cleaners, solvents, or alcohol, as these can damage the remote's surface or internal components.

Troubleshooting

• Remote not responding:
  • Check if the batteries are installed correctly with the correct polarity.
  • Replace the batteries with fresh AAA alkaline batteries.
  • Ensure there are no obstructions between the remote control and the A/V receiver's infrared sensor.
  • Confirm the remote is pointed directly at the receiver.
• Specific functions not working:
  • Verify that the A/V receiver model is listed as compatible with the RC-682M.
  • Ensure the correct input source is selected on the receiver for the function you are trying to control.

Specifications

Warranty and Support

For information regarding warranty coverage or technical support, please refer to the documentation provided with your purchase or contact the retailer. ECONTROLLY strives to provide reliable replacement remote controls.