1. Product Overview
The Creative Hobbies Pre-Wired Bottle Lamp Kit is designed to transform any bottle into a functional and decorative lamp. This kit simplifies the process by eliminating the need for drilling, thanks to its side exit hole design for the electrical cord. It is suitable for various bottle types, including wine and liquor bottles, allowing for personalized lighting solutions.
Key Features:
- Converts bottles into lamps without drilling.
- Includes three different cork sizes for versatile bottle compatibility.
- Comes pre-wired with a socket and a 6-foot cord.
2. Package Contents
Please verify that all components are present before beginning installation:
- 1 x Pre-Wired Lamp Socket with 6-foot Cord
- 3 x Corks (various sizes: 20mm, 22mm, 24mm top diameters)
- Fittings (integrated with the socket)
Note: A light bulb and lampshade are not included and must be purchased separately.
3. Setup and Installation
Follow these steps to convert your bottle into a lamp:
- Prepare Your Bottle: Ensure the bottle you intend to use is clean, dry, and empty. Remove any labels if desired.
- Select the Correct Cork: Choose one of the three provided corks that best fits the opening of your bottle. The cork should fit snugly to provide stability for the lamp kit.
- Insert the Lamp Kit: Carefully insert the lamp socket assembly, with the chosen cork attached, into the bottle opening. Push down firmly until the cork is securely seated in the bottle neck. The electrical cord should exit smoothly from the side hole of the cork.
- Route the Cord: Position the electrical cord as desired. The side exit design allows the cord to run along the outside of the bottle without requiring any modifications to the bottle itself.
This image displays the Creative Hobbies Pre-Wired Bottle Lamp Kit, featuring the brown-colored socket and cord, inserted into the neck of a green glass bottle. The cord exits from the side of the cork, demonstrating the no-drilling design.
This image illustrates the three varying cork sizes provided with the kit, along with their respective dimensions (20mm, 22mm, 24mm top diameters) to ensure compatibility with different bottle openings.
- Install a Light Bulb: Screw a compatible light bulb (Edison Screw base, 120 volts, maximum 60 watts, not included) into the lamp socket. Do not overtighten.
- Add a Lampshade (Optional): If desired, attach a lampshade to the lamp socket. Ensure the lampshade is securely fastened and does not interfere with the bulb or wiring.
This image shows the completed bottle lamp with a black lampshade mounted on the socket, demonstrating the final appearance of a converted bottle lamp.
4. Operating Instructions
To operate your newly assembled bottle lamp:
- Plug the electrical cord into a standard 120-volt wall outlet.
- Locate the on/off switch on the cord or socket (depending on the specific kit variation).
- Flip the switch to the 'ON' position to illuminate the lamp. Flip to 'OFF' to turn it off.
5. Maintenance
Proper maintenance ensures the longevity and safe operation of your lamp kit:
- Cleaning: Disconnect the lamp from the power outlet before cleaning. Wipe the socket and cord with a dry, soft cloth. Do not use liquid cleaners directly on electrical components.
- Bulb Replacement: Always unplug the lamp before replacing a light bulb. Allow the old bulb to cool completely before unscrewing it. Screw in a new bulb of the correct type and wattage (Edison Screw base, 120 volts, max 60 watts).
- Cord Inspection: Periodically inspect the electrical cord for any signs of damage, fraying, or exposed wires. If damage is found, discontinue use immediately and replace the kit.
6. Troubleshooting
If your lamp is not functioning correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power to outlet, faulty bulb, loose connection. | Check if the outlet is working. Replace the light bulb. Ensure the plug is fully inserted and the switch is 'ON'. |
| Bulb flickers. | Loose bulb, incorrect bulb type, faulty socket. | Tighten the bulb. Ensure the bulb is compatible. If flickering persists, the socket may be faulty and the kit should be replaced. |
| Kit feels unstable in the bottle. | Incorrect cork size selected. | Try a different cork size from the kit to achieve a snug fit. |
7. Specifications
- Brand: Creative Hobbies
- Model: M995X-CORK
- Material: Metal, Cork
- Color: Brown (for this specific variant)
- Voltage: 120 volts
- Base Type: Edison Screw
- Cord Length: 6 feet
- UPC: 816682027385
8. Warranty and Support
Creative Hobbies stands by the quality of its products. For specific warranty information or technical support, please refer to the contact information provided on the product packaging or visit the official Creative Hobbies website. Please retain your proof of purchase for any warranty claims.